Keysight Technologies (Agilent HP) 86250D used or new for sale at Used-Line
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)

Showing Results for Keysight Technologies (Agilent HP) 86250D

2 results found for Agilent hp 86250d
Showing page 1 of about 1 pages total.
Here you will find a large selection of new and used Keysight Technologies (Agilent HP) 86250D listed at special prices. Although some items match several categories, all of them are listed here, no matter what category or subcategory they have been placed in. You may sort the listings by price. You also have the option of showing only ads that have been posted in the last 24 hours.

Keysight Technologies (Agilent HP) 86250D () Main Features and Specifications

Product Specs

  • Status Discontinued

The 86250D is a plug-in for the Model 8620-Series Sweep Oscillator mainframes. The plug-in consists of a fundamental oscillator and associated drive circuitry for tuning.

The RF output of the instrument is controlled by the front panel POWER LEVEL control. Power can be leveled externally or internally across the band using a conventional power sampling and feedback technique. The automatic leveling control (ALC) switch selects the mode of leveling—either external (EXT), internal (INT), or OFF. A front panel ALC input connector and gain control are provided to use with an external leveling loop. When the UNLEVELED light is on, it indicates that the RF power is not level across the band. BNC connectors on the rear panel allow for external FM signal inputs and frequency reference voltage output.

The following specifications are for the 86250D installed in the 8620C sweep oscillator.

  • Frequency range: 8.0 to 12.4 GHz
  • Residual FM in 10 kHz bandwidth, CW mode: <15 kHz peak
  • Power level (maximum leveled power, or internally leveled with Option 001): >+10 dBm (10 mW)
  • Equivalent source SWR: <1.6
  • Spurious
    • Harmonics: >30 dB
    • Nonharmonics: >60 dB
  • Residual AM: ≥50 dB below carrier at specified maximum power
  • Modulation
    • External FM: FM frequency response is ±1.5 dB from DC to 2 MHz, and from DC to 10 MHz
    • Internal AM: 1 kHz square wave, RF Blanking, and Marker ON/OFF Ratio: >40 dB 
    • External AM: Symmetry is 40/60, ON/OFF Ratio is >40 dB
    • Upconverter Simulation across 30 MHz sweep width: Linearity at 277 kHz is ≤0.5%, Group Delay at 277 kHz is ≤1 ns, Differential Gain at 5.6 MHz is ≤0.5%, Differential Phase at 5.6 MHz is ≤1° 
    • Upconverter Simulation across 50 MHz sweep width: Linearity at 277 kHz is ≤0.83%, Group Delay at 277 kHz is ≤1.7 ns, Differential Gain at 5.6 MHz is ≤0.83%