Keysight Technologies (Agilent HP) 86290C used or new for sale at Used-Line
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)

Showing Results for Keysight Technologies (Agilent HP) 86290C

2 results found for Agilent hp 86290c
Showing page 1 of about 1 pages total.
Here you will find a large selection of new and used Keysight Technologies (Agilent HP) 86290C listed at special prices. Although some items match several categories, all of them are listed here, no matter what category or subcategory they have been placed in. You may sort the listings by price. You also have the option of showing only ads that have been posted in the last 24 hours.

Keysight Technologies (Agilent HP) 86290C () Main Features and Specifications

Product Specs

  • Status Discontinued
  • Alternative E8257D PSG Analog Signal Generator

The HP 86290C sweep oscillator is a broadband plug-in for the 8620 Family. (It is also compatible with the 8350 sweep oscillator using the 11869A adapter.) A continuous sweep from 2 to 18.6 GHz is provided for broadband swept testing. In addition, higher frequency resolution is achieved by covering the 2 to 18.6 GHz range in three individual bands of 2 to 6.2 GHz, 6 to 12.4 GHz, and 12 to 18.6 GHz. The frequency accuracy of the 86290C is better than ±30 MHz.

The 86290C offers outstanding electrical performance producing >20 mW swept output over the 2 to 18.6 GHz range along with excellent linearity and low spurious and harmonic content. For scalar measurements in the AC detection mode, the 27.8 kHz square wave modulation from the 8755 frequency response test set or 8756/8757 scalar network analyzers is accepted directly through the external AM input. When performing phase / amplitude network analysis, the interfacing between the sweeper and the 8410B/C network analyzer permits the 8410B/C to automatically phase lock over multi-octave sweeps for continous swept 2 to 18.6 GHz phase and amplitude measurements.

  • Frequency range
    • Band 1: 2 to 6.2 GHz
    • Band 2: 6 to 12.4 GHz
    • Band 3: 12 to 18.6 GHz
    • Band 4: 2 to 18.6 GHz
  • Internal leveling standard
  • Maximum leveled power: +13 dBm, Option 004 (rear panel RF output): +12.5 dBm
  • Residual AM in 100 kHz BW: <-55 dBc
  • Spurious
    • Harmonically related signals: <-25 dBc
    • Non-harmonics: <-50 dBc
  • Impedance: 50 Ω, nominal
  • SWR: <1.9 internally leveled
  • RF output connector: Type N (f)
  • Modulation
    • External AM square wave response: On/off ratio >30 dB, symmetry 40/60, attenuation for +5 V input >30 dB
    • Internal AM square wave on/off ratio: >25 dB
    • RF blanking on/off ratio: >30 dB
    • External FM maximum deviations for modulation frequencies: DC to 100 Hz ±75 MHz, 100 Hz to 2 MHz ±5 MHz
  • Minimum sweep time: 10 ms single bands, 60 ms on 2 to 18.6 GHz band
  • Auxiliary output: Rear panel 2 to 6.2 GHz fundamental oscillator output, nominally -10 dBm
  • Frequency reference output: Nominally 1 V/GHz (2 - 18.6 volts) ±35 mV rear panel BNC output