Used Keysight formerly Agilent T&M 44711A for sale by NSCA Technologies LLC | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Multiplexers Keysight Technologies (Agilent HP) 44711A For Sale Keysight formerly Agilent T&M 44711A

Keysight formerly Agilent T&M 44711A

138 Visitors viewed NSCA Technologies LLC ads in the last 30 Days

Send Request
Keysight formerly Agilent T&M 44711A

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Keysight formerly Agilent T&M 44711A

Categories: T&M, Multiplexers

Manufacturer: Agilent

Model: 44711A

Condition: Used

Seller: NSCA Technologies LLC

Keysight (formerly Agilent T&M) 44711A FET Multiplexer

Description

Description

The Keysight 44711A FET Multiplexer is a 24-Channel high speed unit that directly multiplexes voltage, resistance, thermocouple, and strain gages. The unit allows you to maximize your measurement throughput and increase your system reliability. The module is designed for use with the Keysight 3852A Data Acquisition and Control Unit.

  • Maximum switch rates: 5500 channels/second from back-plane, 100000 channels/second from ribbon cable
  • Up to six (eight with extender) high-speed FET multiplexers can be controlled through the ribbon cable
  • The 24-channel multiplexers switch high and low only. Each floating input is balanced (equal impedance between high-to-chassis and low-to-chassis) to provide good common mode rejection
  • FETs have no mechanical limitations, as there is no wearing out due to switching
  • Maximum input voltage: Rear and back-plane input protected to 16 V peak. With analog back-plane disconnected from multiplexer, the back-plane voltage can go up to 42 V peak
  • Maximum input current: 1 mA per channel
  • Input impedance
    • Power on resistance: >108 Ω
    • Power off resistance with Vin 10 V: >1000 Ω
    • Power off resistance with Vin >10 V: >200 Ω
    • Maximum capacitance at 1 MHz: 200 pF
  • Closed channel path resistance: 3.1 kΩ
  • Bandwidth: 1.0% flatness at 20 kHz, -3 dB bandwidth at 200 kHz
  • Crosstalk: -50 dB at 10 kHz, -35 dB at 100 kHz
  • Maximum offset voltage: 15 µV at 0 to 28° C, 185 µV at 28 to 55° C
  • Maximum bias current
    • Current sourced by High or Low to Chassis into Input Terminals or back-plane, with isolation relays closed: ±5 nA DC at 0 to 28° C, ±15 nA DC at 28 to 55° C
    • Current sourced by High or Low to Chassis into back-plane, with isolation relays open: ±1 nA DC at 0 to 55° C
  • Maximum wire size: 16 AWG

 

Product specifications of Keysight formerly Agilent T&M 44711A (From Used-Line T&M Specifications)

  • Launch Date
  • Alternative No replacement.
  • See also 44712A, 44713A
  • Status Discontinued by Manufacturer

The HP 44711A is a 24-channel high-speed FET multiplexer that directly multiplexes voltage, resistance, thermocouples, and strain gages. The 44711A maximizes measurement throughput and increases system reliability.

  • Maximum switch rates: 5500 channels/second from back-plane, 100000 channels/second from ribbon cable
  • Up to six (eight with extender) high-speed FET multiplexers can be controlled through the ribbon cable
  • The 24-channel multiplexers switch high and low only. Each floating input is balanced (equal impedance between high-to-chassis and low-to-chassis) to provide good common mode rejection
  • FETs have no mechanical limitations, as there is no wearing out due to switching 
  • Maximum input voltage: Rear and back-plane input protected to 16 V peak. With analog back-plane disconnected from multiplexer, the back-plane voltage can go up to 42 V peak
  • Maximum input current: 1 mA per channel
  • Input impedance
    • Power on resistance: >108 Ω
    • Power off resistance with Vin 10 V: >1000 Ω
    • Power off resistance with Vin >10 V: >200 Ω
    • Maximum capacitance at 1 MHz: 200 pF
  • Closed channel path resistance: 3.1 kΩ
  • Bandwidth: 1.0% flatness at 20 kHz, -3 dB bandwidth at 200 kHz
  • Crosstalk: -50 dB at 10 kHz, -35 dB at 100 kHz
  • Maximum offset voltage: 15 µV at 0 to 28° C, 185 µV at 28 to 55° C
  • Maximum bias current
    • Current sourced by High or Low to Chassis into Input Terminals or back-plane, with isolation relays closed: ±5 nA DC at 0 to 28° C, ±15 nA DC at 28 to 55° C
    • Current sourced by High or Low to Chassis into back-plane, with isolation relays open: ±1 nA DC at 0 to 55° C
  • Maximum wire size: 16 AWG

View Similar Listings
Hide Similar Listings

Listings similiar to Keysight formerly Agilent T&M 44711A

Send a Request

To: NSCA Technologies LLC
Optional Fields
            
            
            

About NSCA Technologies LLC

Logo of NSCA Technologies LLC
Send to a Friend

Recently Viewed Products