Keysight Technologies (Agilent HP) 44711A used or new for sale at Used-Line
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)

Showing Results for Keysight Technologies (Agilent HP) 44711A

3 results found for Agilent hp 44711a
Similar models:  Keysight Technologies (Agilent HP) 44712A  Keysight Technologies (Agilent HP) 44713A
Showing page 1 of about 1 pages total.
Here you will find a large selection of new and used Keysight Technologies (Agilent HP) 44711A listed at special prices. Although some items match several categories, all of them are listed here, no matter what category or subcategory they have been placed in. You may sort the listings by price. You also have the option of showing only ads that have been posted in the last 24 hours.

Keysight Technologies (Agilent HP) 44711A () Main Features and Specifications

Product Specs

  • Status Discontinued
  • Alternative No replacement.

See also

The HP 44711A is a 24-channel high-speed FET multiplexer that directly multiplexes voltage, resistance, thermocouples, and strain gages. The 44711A maximizes measurement throughput and increases system reliability.

  • Maximum switch rates: 5500 channels/second from back-plane, 100000 channels/second from ribbon cable
  • Up to six (eight with extender) high-speed FET multiplexers can be controlled through the ribbon cable
  • The 24-channel multiplexers switch high and low only. Each floating input is balanced (equal impedance between high-to-chassis and low-to-chassis) to provide good common mode rejection
  • FETs have no mechanical limitations, as there is no wearing out due to switching 
  • Maximum input voltage: Rear and back-plane input protected to 16 V peak. With analog back-plane disconnected from multiplexer, the back-plane voltage can go up to 42 V peak
  • Maximum input current: 1 mA per channel
  • Input impedance
    • Power on resistance: >108 Ω
    • Power off resistance with Vin 10 V: >1000 Ω
    • Power off resistance with Vin >10 V: >200 Ω
    • Maximum capacitance at 1 MHz: 200 pF
  • Closed channel path resistance: 3.1 kΩ
  • Bandwidth: 1.0% flatness at 20 kHz, -3 dB bandwidth at 200 kHz
  • Crosstalk: -50 dB at 10 kHz, -35 dB at 100 kHz
  • Maximum offset voltage: 15 µV at 0 to 28° C, 185 µV at 28 to 55° C
  • Maximum bias current
    • Current sourced by High or Low to Chassis into Input Terminals or back-plane, with isolation relays closed: ±5 nA DC at 0 to 28° C, ±15 nA DC at 28 to 55° C
    • Current sourced by High or Low to Chassis into back-plane, with isolation relays open: ±1 nA DC at 0 to 55° C
  • Maximum wire size: 16 AWG