Showing Results for Anritsu MS2720T

The Spectrum Master™ MS2720T series provides field technicians and engineers with performance that rivals a benchtop spectrum analyzer. The MS2720T features a touchscreen, full-band tracking generators to 20 GHz, and best-in-class performance for dynamic range, DANL, phase noise, and sweep speed, providing unprecedented levels of spectrum monitoring, hidden signal detection, RF/microwave measurements, and testing of microwave backhauls and cellular signals.

MS2720T models:

• MS2720T-0709: 9 GHz Spectrum Analyzer
• MS2720T-0713: 13 GHz Spectrum Analyzer
• MS2720T-0720: 20 GHz Spectrum Analyzer
• MS2720T-0732: 32 GHz Spectrum Analyzer
• MS2720T-0743: 43 GHz Spectrum Analyzer

Continuous frequency coverage from 9 kHz to 43 GHz is provided by the MS2720T. This gives the wireless professional the performance needed for the most demanding measurements. Whether your application is spectrum monitoring, hidden signal detection, RF and microwave signal measurements, microwave backhaul testing, or cellular signal measurements, the Spectrum Master MS2720T gives you the tools you need to make the job easier and more productive.

The MS2720T features an improved sweep mode that allows users to set resolution bandwidth from 30 kHz to 10 MHz with minimal effect on sweep speed. Because the sweep speed with a 30 kHz bandwidth is nearly the same as a 10 MHz RBW, sensitivity can be selected without the need for long sweep times. For maximum flexibility, sweep triggering can be set to free run or a single sweep. In zero span, sweeps can be free run, set to trigger when a signal meets or exceeds a designated power level, or it can be externally triggered. Spans can be set from 10 Hz to 9, 13, 20, 32, or 43 GHz, in addition to zero span.

The MS2720T has a dynamic range of >106 dB in 1 Hz RBW, DANL of -163 dBm in 1 Hz RBW, and Phase Noise of -112 dBm @ 10 kHz offset at 1 GHz. These best-in-class specifications are complemented by unprecedented measurement capabilities. A burst detect sweep mode function allows emitters as short as 200 µs to be captured every time, allowing the MS2720T to detect bursty signals that can lead to finding intermittent or bursty emitters. A Burst Detect™ Sweep Mode increases sweep speed more than 1,000 times in a 15 MHz span.

A full-band tracking generator that covers 100 kHz to 9, 13, or 20 GHz is available. The tracking generator provides state-of-the-art features not available on competitive handheld analyzers, including 0.1 dB power step size, wide dynamic range up to 100 dB, and power output flatness of ±0.5 dB. The tracking generator includes a Continuous Wave (CW) generator for measuring fixed frequency components, as well.

An advanced 8.4-inch touchscreen user interface is incorporated into the Spectrum Master MS2720T. With the new touchscreen, users can add shortcut buttons for any menu button or file, making it possible for a setup file to be recalled with a single press of the touchscreen.

The MS2720T has extensive interference measurement capability, including Spectrograms that show events over time, making it simple to locate intermittent interferers. Signal strength measurements, coupled with a directional antenna, make it easier to find rogue transmitters. Like all Spectrum Master handheld spectrum analyzers, the MS2720T has dedicated routines for one-button measurements of field strength, channel power, occupied bandwidth, Adjacent Channel Power Ratio (ACPR) and Carrier to Interference (C/I).

The MS2720T offers six options for measuring the major wireless standards around the world, such as LTE FDD/TDD, GSM/GPRS/EDGE, W-CDMA/HSPA+, TD-SCDMA/HSPA+, CDMA/EV-DO, and WiMAX Fixed/Mobile. Other capabilities include measurements for Electro-Magnetic Interference (EMI) that when combined with Anritsu's EMI probe kit allows engineers to troubleshoot EMI issues and provide an inexpensive way to "pre-screen" for problems, improving time-to-market.

Designed for field use, the Spectrum Master MS2720T has a durable housing that can withstand the extreme temperatures and environments associated with field use.

• Frequency Coverage: 9 kHz to 43 GHz
• Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Field Strength
• Dynamic Range: >106 dB in 1 Hz RBW @ 2.4 GHz
• DANL: –160 dBm in 1 Hz RBW @ 1 GHz preamp On
• Broadband preamplifiers over the whole frequency range for increased sensitivity, approximately 17 dB
• Three Sweep Modes: improved sweep speed, up to 100 times faster
• Resolution and Video Bandwidths from 1 Hz to 10 MHz
• New triggering choices, including hysteresis, hold-off, and delay
• More zero-span capabilities including 10 MHz RBW & VBW
• Phase Noise: –104 dBc/Hz @ 10 kHz offset at 1 GHz
• Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice
• Choice of display options for readability: normal, black and white, night vision, or high contrast
• On-screen Interference Mapping as part of the Interference Analysis option
• LTE Measurements up to 20 MHz
• AM/FM/PM Analysis
• 30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal
• Burst detect captures 200 μs bursts the first time, every time

The Spectrum Master MS2720T features over 30 analyzers in one to meet virtually every measurement need. In addition to spectrum analysis, a user can select optional capabilities and analyzers including:

• High Accuracy Power Meter
• Tracking Generator options to 20 GHz
• Interference Analyzer
• Channel Scanner
• 140 MHz Zero-Span IF Output, 30 MHz bandwidth
• GPS Receiver
• Increase Frequency Accuracy, Geo-Tag Data Collection
• Secure Data Operation option
• 3GPP Signal Analyzers
• LTE (TDD and FDD), GSM/EDGE, W-CDMA/HSPA+, TD-SCDMA/HSPA+
• 3GPP2 Signal Analyzers
• CDMA and EV-DO
• IEEE 802.16 Signal Analyzers
• Fixed WiMAX and Mobile WiMAX

Spectrum Master MS2720T specifications:

• Frequency range
  • MS2720T-0709: 9 kHz to 9 GHz
  • MS2720T-0713: 9 kHz to 13 GHz
  • MS2720T-0720: 9 kHz to 20 GHz
  • MS2720T-0732: 9 kHz to 32 GHz
  • MS2720T-0743: 9 kHz to 43 GHz
• Tuning resolution: 1 Hz
• Bandwidth
  • Resolution Bandwidth (RBW): 1 Hz to 10 MHz in 1–3 sequence ±10 % (–3 dB bandwidth)
  • Video Bandwidth (VBW): 1 Hz to 10 MHz in 1–3 sequence (–3 dB bandwidth)
• Smart measurements
  • Field Strength (dBm/m², dBW/m², V/m, A/m, Watt/m², Watt/cm², or dBmV/m)
  • Occupied Bandwidth (measures 99% to 1% power channel of a signal)
  • Channel Power (measures the total power in a specified bandwidth)
  • ACPR (adjacent channel power ratio)
  • AM/FM/SSB Demodulation (AM, wide/narrow FM, upper/lower SSB), (audio out only)
  • C/I (carrier-to-interference ratio)
  • Emission Mask (recall limit lines as emission mask)
• Spectral purity, SSB phase noise at 1 GHz
  • 9 GHz model at 100 kHz offset: Maximum -110 dBc/Hz, -115 dBc/Hz typical
  • 13 GHz to 43 GHz models at 10 MHz offset: Maximum -123 dBc/Hz, -129 dBc/Hz typical
• Amplitude
  • Dynamic Range: >106 dB minimum at 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW
  • Measurement Range: DANL to +30 dBm
  • Display Range: 1 to 15 dB/div in 1 dB steps, ten divisions displayed
  • Reference Level Range: –120 dBm to +30 dBm
  • Attenuator Resolution: 0 to 65 dB, 5.0 dB steps
  • Amplitude Units: Log Scale Modes: dBm, dBV, dBmV, dBµV; Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW
  • Maximum Continuous Input: +30 dBm Peak typical, ± 50 VDC (≥10 dB Attenuation); +23 dBm Peak typical, ± 50 VDC (< 10 dB Attenuation); +13 dBm Peak typical, ± 50 VDC (Preamp = ON)
• Displayed Average Noise Level (DANL), Preamp OFF, RMS detection, VBW/Avg type = Log, Ref Level = –20 dBm
  • 9 GHz model: >3 GHz to 8 GHz, -143 dBm typical
  • 20 GHz model: >13 GHz to 20 GHz, -141 dBm typical
  • 32 to 43 GHz models: >13 GHz to 32 GHz, -138 dBm typical
• Displayed Average Noise Level (DANL), Preamp ON, RMS detection, VBW/Avg type = Log, Ref Level = –50 dBm, Performance Sweep Mode
  • 9 GHz model: >3 GHz to 8 GHz, -155 dBm typical
  • 20 GHz model: >13 GHz to 20 GHz, -160 dBm typical
  • 32 to 43 GHz models: >13 GHz to 32 GHz, -157 dBm typical
• Third-Order Intercept (TOI), –20 dBm tones 100 kHz apart, 0 dB Attenuation Preamp OFF
  • 2.4 GHz: +14 dBm minimum
  • 50 MHz to 20 GHz: +20 dBm typical
  • >20 GHz to 32 GHz: +15 dBm typical
  • >32 GHz to 20 GHz: +20 dBm typical
• P1dB
  • <4 GHz: 5 dBm typical
  • 4 GHz to 20 GHz: 12 dBm typical
  • >20 GHz to 32 GHz: 7 dBm typical
  • >32 GHz to 43 GHz: 12 dBm typical
• Second Harmonic Distortion (0 dB input attenuation, –30 dBm input), 50 MHz: –54 dBc maximum
• VSWR (>10 dB input attenuation)
  • 9 GHz model: <4 GHz 1.5:1 typical, 4 GHz to 8 GHz 1.8:1 typical
  • 13 GHz to 43 GHz models: <20 GHz 1.5:1 typical, 20 GHz to 43 GHz 2.0:1 typical
• Options: Tracking generator, Secure data storage, RF and Demodulation hardware, High-accuracy power meter, I/Q waveform capture, GPS receiver, Interference analyzer, Channel scanner, Zero-span IF output, Gated sweep, Coverage mapping, AM/FM/PM analyzer, GSM/GPRS, EDGE RF measurements, W-CDMA/HSPA+ meausurements, TD-SCDMA/HSPA+ measurements, LTE (FDD and TDD) measurements, CDMA2000 1X & EV-DO measurements, WiMAX Fixed/Mobile measurements, Calibration options
• Connectors
  • RF In: 9 GHz to 20 GHz Instruments: Type N, female, 50 Ω; 32 GHz to 43 GHz Instruments: Ruggedized Type K, male
  • RF Out: 9 GHz to 20 GHz Instruments: Type N, female, 50 Ω
  • GPS: SMA Female
  • External Power: 5.5 mm barrel connector, 12 to 14.5 VDC, <5.0 A
  • LAN Connection: RJ48C, 10/100 Mbps, Connect to PC or LAN for Remote Access
  • USB Interface: Two Type A, Connect Flash Drive and Power Sensor; 5-pin mini-B, Connect to PC for data transfer
  • Headset: Jack 3.5 mm 3-wire headset jack
  • External Reference In: BNC, female, 50 Ω, Maximum Input +10 dBm
  • External Reference Out: BNC, female, 50 Ω, 10 MHz
  • External Trigger: BNC, female, 50 Ω, Maximum Input +5 VDC
  • IF Out: BNC, female, 50 Ω, 140 MHz
• Display: 8.4" Touch Screen, 800 x 600 Resolution
• Keyboard: Backlit, red for Night Vision, white for all other display modes
• Battery: Li-Ion, 3 hour operation typical