Keysight Technologies (Agilent HP) 8553B used or new for sale at Used-Line
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)

Showing Results for Keysight Technologies (Agilent HP) 8553B

2 results found for Agilent hp 8553b
Showing page 1 of about 1 pages total.
Here you will find a large selection of new and used Keysight Technologies (Agilent HP) 8553B listed at special prices. Although some items match several categories, all of them are listed here, no matter what category or subcategory they have been placed in. You may sort the listings by price. You also have the option of showing only ads that have been posted in the last 24 hours.

Keysight Technologies (Agilent HP) 8553B () Main Features and Specifications

Product Specs

  • Status Discontinued

The HP 8553B is a spectrum analyzer RF section, which can be used with the 141T (140 Series) spectrum analyzer display section, the 8552A/B spectrum analyzer IF sections, and the 8443A tracking generator/counter.

The analyzer is a highly sensitive superheterodyne receiver with spectrum scanning capabilities up to 110 MHz. Output video from the receiver circuits is applied to the CRT in the display section. A signal or group of signals can be analyzed in the frequency domain. Input signals are plotted on the CRT as a function of amplitude versus frequency. The amplitiude of the CRT is calibrated in absolute units of power (dBm) or voltage (µV/mV), so absolute and relative measurements of both amplitude and frequency can be made.

Controls of the instruments are arranged for easy operation. For wide spectrum analysis, the operator can use a preset scan of 0 to 100 MHz. For more detailed study, the spectrum width can be progressively narrowed to .2 kHz, or the scanning capabilities can be eliminated altogether to use the 8553B as a fixed frequency receiver. A bandwidth of 300 kHz is automatically selected for preset scan operation. For variable scan and fixed frequency operation, narrower bandwidths can be selected by the operator.

  • Frequency range: 1 kHz to 110 MHz
  • Resolution bandwidth: IF bandwidths of 10 Hz to 300 kHz
  • Absolute amplitude calibration range
    • Log: -130 to ±10 dBm
    • Linear: 0.1 µV/div to 100 mV/div
  • Dynamic range
    • Average noise level: <-100 dBm with 10 kHz IF bandwidth
    • Spurious: Below a -40 dBm signal at the input mixer—All image and out-of-band mixing responses, harmonic and intermodulation distortion more than 70 dB down, 2 MHz to 110 MHz; more than 60 dB down, 1 kHz to 2 MHz. Third order intermodulation products more than 70 dB down, 1 kHz to 110 MHz
    • Residual responses (no signal present at input): With input attenuation at 0 dB - <-110 dBm (200 kHz to 110 MHz), <-95 dBm (20 kHz to 200 kHz)
  • Calibrator output
    • Amplitude: -30 dBm
    • Frequency: 30 MHz
  • Input impedance: 50 Ω nominal
  • Maximum input level: Peak or average power ±13 dBm (1.4 Vac peak), ±50 Vdc
  • Auxiliary outputs
    • Vertical output: ~0 to -0.8 V for 8 div deflection on CRT display, ~100 Ω output impedance
    • Scan output: ~-5 to ±5 V for 10 div CRT deflection, 5 kΩ output impedance
    • Pen lift output: 0 to 14 V (0 V, pen down)