Keysight Agilent MSOX3052A
98 Visitors viewed Testwall Ltd ads in the last 30 Days

Send Request

Add to request cart

Send to a Friend

Equipment Location: Ireland

View Description>

Hide Description

Description of Keysight Agilent MSOX3052A

Categories: Oscilloscopes, Mixed Signal Oscilloscopes

Manufacturer: Keysight Technologies (Agilent HP)

Model: MSOX3052A

Condition: Used

Seller: Testwall Ltd

Keysight (Agilent) MSOX3052A

Oscilloscope, 500 MHz 2 + 16 Chs., 4 GSa/s

Keysight MSOX3052A (Agilent) Oscilloscope The Agilent MSOX3052A is a two-channel model in the InfiniiVision 3000 X-Series. Engineered with breakthrough technology this upgradable Oscilloscope provides superior performance and functionality. Its unique 5-instruments-in-one design delivers more scope for the same budget.Features and Specifications of the Keysight MSOX3052A Oscilloscope include:Features of the Agilent MSOX3052A include:

One million waveforms per second update rate

MegaZoom IV smart memory technology

Large 8.5-inch WVGA display

Optional segmented memory

Industry’s first 5-instruments-in-1:

Oscilloscope
Digital channels
Built-in 20 MHz function/arbitrary waveform generator with modulation
Integrated digital voltmeter
Protocol Analyser

Investment protection with Industry’s only fully-upgradable Oscilloscope, including bandwidth up to 1 GHz

Industry’s leading applications solution

Oscilloscope

Digital channels

Built-in 20 MHz function/arbitrary waveform generator with modulation

Integrated digital voltmeter

Protocol Analyser

Specifications of the Keysight MSOX3052A include:

Bandwidth (-3 dB): 500 MHz

Calculated rise time (10 – 90%): ≤ 700 ps

Input channels:

2 analog channels
16 digital channels

Maximum sample rate:

4 GSa/s half channel
2 GSa/s all channel

Maximum memory depth:

Standard 2 Mpts
Optional 4 Mpts
Optional segment memory

Display size and type: 8.5 WVGA display

Waveform update rate: > 1 million waveforms per second

Number of active probes supported: In general, one for 2-channel models

Vertical system analog channels:

Hardware bandwidth limits: Approximately 20 MHz (selectable)
Input coupling: AC, DC
Input impedance: Selectable:

1 MΩ ± 1% (14 pF)
50 Ω ± 1.5%

Input sensitivity range: 1mV/div to 5 V/div (1 MΩ and 50 Ω)
Vertical resolution: 8 bits (measurement resolution is 12 bits with averaging)
Maximum input voltage:

300 Vrms, 400 Vpk
Transient overvoltage 1.6 kVpk
With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk

DC vertical accuracy: ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
DC vertical gain accuracy: ± 2.0% full scale
DC vertical offset accuracy: ± 0.1 div ± 2 mV ± 1% of offset setting
Channel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)
Offset range:

± 2 V (1 mV/div to 200 mV/div)
± 50 V (> 200 mV/div to 5 mV/div)

Vertical system digital channels:

Digital input channels: 16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)
Thresholds: Threshold per pod
Threshold selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)
User-defined threshold range: ± 8.0 V in 10 mV steps
Maximum input voltage: ± 40 V peak CAT l; transient overvoltage 800 Vpk
Threshold accuracy: ± (100 mV + 3% of threshold setting)
Maximum input dynamic range: ± 10 V about threshold
Minimum voltage swing: 5 mVpp
Input impedance: 100 kΩ ± 2% at probe tip
Input capacitance: ~8 pF
Vertical resolution: 1 bit

Horizontal system analog channels:

Time base range: 1 ns/div to 50 s/div
Time base accuracy: 25 ppm ± 5 ppm per year (aging)
Time base delay time range:

Pre-trigger: Greater of 1 screen width or 250 μs
Post-trigger: 1 s to 500 s

Channel-to-channel deskew range: ± 100 ns
Δ Time accuracy (using cursors): ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps
Modes: Main, zoom, roll, XY
XY:

On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold
Bandwidth: Maximum bandwidth
Phase error at 1 MHz: < 0.5 degree

Horizontal system digital channels:

Minimum detectable pulse width: 5 ns
Channel-to-channel skew:

2 ns (typical)
3 ns (maximum)

Aquisition system:

Maximum analog channels sample rate:

4 GSa/s half channel interleaved
2 GSa/s all channel

Maximum analog channels record length:

2 Mpts half channel interleaved, 1 Mpts all channel (standard)
4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))

Maximum duration of time captured at highest sampling rate (all analog channels): 500 us with 4M memory upgrade
Maximum digital channels sample rate: 1 GSa/s
Maximum digital channels record length:

1 Mpts (standard with digital channels only)
2 Mpts (optional with DSOX3MEMUP – with digital channels only)

Modes:

Normal: Default mode
Peak detect: Capture glitches as narrow as 250 ps at all time base settings
Averaging: Selectable from 2, 4, 8, 16, 64, … to 65,536
High resolution:

Real time boxcar averaging reduces random noise and effectively increases vertical resolution
12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
or ≥ 20-μs/div at 2 GSa/s

Segmented:

Segmented memory optimizes available memory for data streams that have long dead times between activity
Maximum segments = 1000
Re-arm time = 1 μs (minimum time between trigger events)

Trigger system:

Trigger sources: Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)
Trigger modes:

Normal (triggered): requires trigger event for scope to trigger
Auto : triggers automatically in absence of trigger event
Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
Force: front panel button that forces a trigger

Trigger coupling:

DC: DC coupled trigger
AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);
High frequency reject: cutoff frequency ~ 50 kHz
Low frequency reject: cutoff frequncy ~ 50 kHz
Noise reject:
- Selectable OFF or ON
- Decreases sensitivity 2x

Trigger holdoff range: 40 ns to 10.00 s
Trigger sensitivity:

Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
External:

200 mVpp from DC to 100 MHz
350 mVpp 100 MHz to 200 MHz

Trigger level range:

Any channel: ± 6 div from center screen
External: ± 8 V

2 analog channels

16 digital channels

4 GSa/s half channel

2 GSa/s all channel

Standard 2 Mpts

Optional 4 Mpts

Optional segment memory

Hardware bandwidth limits: Approximately 20 MHz (selectable)

Input coupling: AC, DC

Input impedance: Selectable:

1 MΩ ± 1% (14 pF)
50 Ω ± 1.5%

Input sensitivity range: 1mV/div to 5 V/div (1 MΩ and 50 Ω)

Vertical resolution: 8 bits (measurement resolution is 12 bits with averaging)

Maximum input voltage:

300 Vrms, 400 Vpk
Transient overvoltage 1.6 kVpk
With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk

DC vertical accuracy: ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]

DC vertical gain accuracy: ± 2.0% full scale

DC vertical offset accuracy: ± 0.1 div ± 2 mV ± 1% of offset setting

Channel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)

Offset range:

± 2 V (1 mV/div to 200 mV/div)
± 50 V (> 200 mV/div to 5 mV/div)

1 MΩ ± 1% (14 pF)

50 Ω ± 1.5%

300 Vrms, 400 Vpk

Transient overvoltage 1.6 kVpk

With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms

Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk

± 2 V (1 mV/div to 200 mV/div)

± 50 V (> 200 mV/div to 5 mV/div)

Digital input channels: 16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)

Thresholds: Threshold per pod

Threshold selections: TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)

User-defined threshold range: ± 8.0 V in 10 mV steps

Maximum input voltage: ± 40 V peak CAT l; transient overvoltage 800 Vpk

Threshold accuracy: ± (100 mV + 3% of threshold setting)

Maximum input dynamic range: ± 10 V about threshold

Minimum voltage swing: 5 mVpp

Input impedance: 100 kΩ ± 2% at probe tip

Input capacitance: ~8 pF

Vertical resolution: 1 bit

Time base range: 1 ns/div to 50 s/div

Time base accuracy: 25 ppm ± 5 ppm per year (aging)

Time base delay time range:

Pre-trigger: Greater of 1 screen width or 250 μs
Post-trigger: 1 s to 500 s

Channel-to-channel deskew range: ± 100 ns

Δ Time accuracy (using cursors): ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps

Modes: Main, zoom, roll, XY

XY:

On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold
Bandwidth: Maximum bandwidth
Phase error at 1 MHz: < 0.5 degree

Pre-trigger: Greater of 1 screen width or 250 μs

Post-trigger: 1 s to 500 s

On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold

Bandwidth: Maximum bandwidth

Phase error at 1 MHz: < 0.5 degree

Minimum detectable pulse width: 5 ns

Channel-to-channel skew:

2 ns (typical)
3 ns (maximum)

2 ns (typical)

3 ns (maximum)

Maximum analog channels sample rate:

4 GSa/s half channel interleaved
2 GSa/s all channel

Maximum analog channels record length:

2 Mpts half channel interleaved, 1 Mpts all channel (standard)
4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))

Maximum duration of time captured at highest sampling rate (all analog channels): 500 us with 4M memory upgrade

Maximum digital channels sample rate: 1 GSa/s

Maximum digital channels record length:

1 Mpts (standard with digital channels only)
2 Mpts (optional with DSOX3MEMUP – with digital channels only)

Modes:

Normal: Default mode
Peak detect: Capture glitches as narrow as 250 ps at all time base settings
Averaging: Selectable from 2, 4, 8, 16, 64, … to 65,536
High resolution:

Real time boxcar averaging reduces random noise and effectively increases vertical resolution
12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
or ≥ 20-μs/div at 2 GSa/s

Segmented:

Segmented memory optimizes available memory for data streams that have long dead times between activity
Maximum segments = 1000
Re-arm time = 1 μs (minimum time between trigger events)

4 GSa/s half channel interleaved

2 GSa/s all channel

2 Mpts half channel interleaved, 1 Mpts all channel (standard)

4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))

1 Mpts (standard with digital channels only)

2 Mpts (optional with DSOX3MEMUP – with digital channels only)

Normal: Default mode

Peak detect: Capture glitches as narrow as 250 ps at all time base settings

Averaging: Selectable from 2, 4, 8, 16, 64, … to 65,536

High resolution:

Real time boxcar averaging reduces random noise and effectively increases vertical resolution
12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
or ≥ 20-μs/div at 2 GSa/s

Segmented:

Segmented memory optimizes available memory for data streams that have long dead times between activity
Maximum segments = 1000
Re-arm time = 1 μs (minimum time between trigger events)

Real time boxcar averaging reduces random noise and effectively increases vertical resolution

12 bits of resolution when ≥ 10 μs/div at 4 GSa/s

or ≥ 20-μs/div at 2 GSa/s

Segmented memory optimizes available memory for data streams that have long dead times between activity

Maximum segments = 1000

Re-arm time = 1 μs (minimum time between trigger events)

Trigger sources: Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)

Trigger modes:

Normal (triggered): requires trigger event for scope to trigger
Auto : triggers automatically in absence of trigger event
Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
Force: front panel button that forces a trigger

Trigger coupling:

DC: DC coupled trigger
AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);
High frequency reject: cutoff frequency ~ 50 kHz
Low frequency reject: cutoff frequncy ~ 50 kHz
Noise reject:
- Selectable OFF or ON
- Decreases sensitivity 2x

Trigger holdoff range: 40 ns to 10.00 s

Trigger sensitivity:

Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
External:

200 mVpp from DC to 100 MHz
350 mVpp 100 MHz to 200 MHz

Trigger level range:

Any channel: ± 6 div from center screen
External: ± 8 V

Normal (triggered): requires trigger event for scope to trigger

Auto : triggers automatically in absence of trigger event

Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode

Force: front panel button that forces a trigger

DC: DC coupled trigger

AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);

High frequency reject: cutoff frequency ~ 50 kHz

Low frequency reject: cutoff frequncy ~ 50 kHz

Noise reject:

Selectable OFF or ON
Decreases sensitivity 2x

Selectable OFF or ON

Decreases sensitivity 2x

Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div

External:

200 mVpp from DC to 100 MHz
350 mVpp 100 MHz to 200 MHz

200 mVpp from DC to 100 MHz

350 mVpp 100 MHz to 200 MHz

Any channel: ± 6 div from center screen

External: ± 8 V

Product specifications of Keysight Agilent MSOX3052A (From Used-Line T&M Specifications)

Launch Date Feb-2011
Type Benchtop Portable
Bandwidth 500 MHz
Scope Channels 2
Digital Channels 16
Memory Depth 1 Mpts standard, 2 Mpts optional
Sample Rate 2 GSa/sec

See also MSOX3012A, MSOX3014A, MSOX3024A, MSOX3032A, MSOX3034A, MSOX3054A, MSOX3102A, MSOX3104A

Status --

The Agilent InfiniiVision MSOX3052A is engineered to deliver value, functionality, and flexibility at prices that fit into your existing budgets. This 2-channel model in the InfiniiVision 3000 X-Series, with 1,000,000 waveforms/sec, gives you superior performance and functionality today, and the ability to upgrade capabilities, such as serial measurement applications, in the future.

Digital content is everywhere in the designs of today and traditional two and four channel oscilloscopes do not always provide enough channels for the job at hand. With an additional 16 integrated digital timing channels, you now have up to 20 channels of time-correlated triggering, acquisition, and viewing on the same instrument.

Largest screen in its class: 8.5-inch WVGA display
Fastest update rate of 1,000,000 waveforms per second
Deepest memory: 4 Mpts (Optional, 2 Mpts interleaved standard)
Best-in-class oscilloscope
Integrated logic timing analyzer
Built-in 20-MHz function generator: WaveGen
Hardware-based protocol analyzer
Localized GUI and help
33 automated measurements, nine parametric triggers, six serial protocol triggers, as well as seven waveform math functions, including FFT
Autoscale button for automatically setting the vertical, horizontal, and trigger controls for optimal viewing (can be disabled or enabled)
Upgradability: add digital channels, or WaveGen after purchase
Optional serial protocol analysis applications including: I²C, SPI, RS232, UART, CAN, LIN, and I²S
Segmented memory: Segmented memory acquisition lets you selectively capture and store important segments of signals without capturing unimportant signal idle/deadtime
Mask Testing: Hardware-based mask testing can perform up to 280,000 tests per second
Reference waveforms: Store up to two waveforms in the non-volatile reference waveform memory locations, for comparing with live waveforms, and performing post analysis
Connectivity: Operate the scope from a PC and save and recall waveforms as well as set-up files via LAN. Built-in USB host (one front, one rear), and USB device ports, an optional LAN/VGA module, and an optional GPIB module. Only one module can be used at a time

Performance characteristics of the MSOX3052A:

Analog bandwidth (-3dB ): 500 MHz
Analog input channels: 2
Calculated rise time: ≤ 800 ps
Time base range: 1 ns/div to 50 s/div

Performance characteristics of all 3000 X-Series models:

Hardware bandwidth limits: 20 MHz selectable
Input coupling: AC, DC, GND
Input impedance: Selectable 1 MΩ ± 1%; 50 Ω ± 1.5%
Input sensitivity range: 2 mV/div to 5 V/div
Sample rate on each channel: 2 GSa/s per channel; 4 GSa/s half-channel interleaved
Maximum record length: Standard, 1 Mpt per channel, 2 Mpts half-channel interleaved; With option, 2 Mpts per channel, 4 Mpts half-channel interleaved
Maximum duration of time captured at highest sample rate (all channels): 1 ms
Display: 8.5-inch WVGA with 64 levels of intensity grading
Waveform update rate (max): 1,000,000 waveforms/s
Vertical resolution: 8 bits
Horizontal resolution: 2.5 ps
Time base delay time range
- Pre-trigger – Greater of 1 screen width or 250 μs
- Post-trigger – 1 s to 500 s
Channel-to-channel deskew range: ± 100 ns
Channel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)
Offset range: ±2 V (2 mV/div to 200 mV/div), ±50 V (> 200 mV/div to 5 V/div)
Vertical system digital channels
- Digital input channels: 16 digital (D0 to D15)
- Thresholds: Threshold per set of 8 channels
- Threshold selections: TTL (+1.4 V), 5 V CMOS (+2.5 V), ECL (–1.3 V), User-definable (selectable by pod)
- User-defined threshold range: ±8.0 V in 10 mV steps
- Maximum input voltage: ±40 V peak CAT I; transient overvoltage 800 Vpk
- Maximum input dynamic range: ±10 V about threshold
- Minimum voltage swing: 500 mVpp
- Input impedance: 100 kΩ ±2% at probe tip
- Probe loading: ~8 pF
- Vertical resolution: 1 bit
Horizontal system digital channels
- Maximum sample rate: 1 GSa/s
- Maximum record length: 2 Mpts (digital only), 500 kpts (analog and digital channels)
- Minimum detectable pulse width: 5 ns
- Channel-to-channel skew: 2 ns (typical); 3 ns (maximum)
Acquisition modes
- Normal
- Peak detect: Capture glitch as narrow as 250 ps at all timebase settings
- Averaging: Select from 2, 4, 8, 16, 64, up to 65,536
- High resolution mode: 12 bits of resolution when ≥ 10 μs/div at 4 GSa/s or ≥20 μs/div at 2 GSa/s
- Segmented (optional): Re-arm time= 1 μs (minimum time between trigger events)
Trigger modes
- Normal (triggered): requires trigger event for scope to trigger
- Auto: triggers automatically in absence of trigger event
- Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
- Force: front panel button that forces a trigger
Trigger level range
- Any channel: ± 6 div from center screen
- External: ± 8 V
Waveform automatic measurements (Measurements continuously updated with statistics. Cursors track last selected measurement. Select up to four measurements from the list.)
- Voltage: peak-to-peak, maximum, minimum, amplitude, top, base, overshoot, pre-shoot, average- N cycles, average- full screen, DC RMS- N cycles, DC RMS- full screen, AC RMS- N cycles, AC RMS- full screen (standard deviation), ratio (RMS1/RMS2)
- Time: period, frequency, counter, + width, - width, burst width, duty cycle, rise time, fall time, delay, phase, X at min Y, X at Max Y
- Count: positive pulse count, negative pulse count, rising edge count, falling edge count
- Mixed: area- N cycles, area- full screen
Input/output ports
- USB 2.0 hi-speed host port: Two USB 2.0 hi-speed host ports, front and rear panel; Supports memory devices and printers
- USB 2.0 hi-speed device port: One USB 2.0 hi-speed device port on rear panel
- LAN port: 10/100Base-T (requires DSOXLAN module)
- Video out port: Connect oscilloscope display to an external monitor or projector (requires DSOXLAN module)
- GPIB port: To allow easy migration into existing test systems (requires DSOXGPIB)
- Probe compensator output: Square wave: 2.5 Vpp, 1 kHz
- Kensington style lock: Rear-panel security slot connects to standard Kensington-style lock
- WaveGen out: Front-Panel BNC Connector

View Similar Listings

Hide Similar Listings

Send a Request

To: Testwall Ltd

Optional Fields

Remember me

Send me a copy.

Send me news, sales, & auction announcements

About Testwall Ltd

Used-Line Dealer since : 2003

The dealer's latest update over 30 days
Click to view phone number
Click to view seller’s site
Used equipment for sale by Testwall Ltd (7000)
Business Center Kimpton Road England U.K.

Send to a Friend

Keysight Agilent MSOX3052A
98 Visitors viewed Testwall Ltd ads in the last 30 Days

Description of Keysight Agilent MSOX3052A

Product specifications of Keysight Agilent MSOX3052A (From Used-Line T&M Specifications)

Listings similiar to Keysight Agilent MSOX3052A

Send a Request

About Testwall Ltd

Recently Viewed Listing Pages

Recently Viewed Products

Keysight Agilent MSOX3052A 98 Visitors viewed Testwall Ltd ads in the last 30 Days

Description of Keysight Agilent MSOX3052A

Product specifications of Keysight Agilent MSOX3052A (From Used-Line T&M Specifications)

Listings similiar to Keysight Agilent MSOX3052A

Send a Request

About Testwall Ltd

Recently Viewed Listing Pages

Recently Viewed Products

Just one last small step...

Just one last small step...

Tell a Friend About This Product

√ Sent

Just one last small step...

Keysight Agilent MSOX3052A
98 Visitors viewed Testwall Ltd ads in the last 30 Days