Showing Results for Keysight Technologies (Agilent HP) MSOX3104A

The Agilent InfiniiVision MSOX3104A, offers price points to fit your budget with superior performance and optional capabilities that are not available in any other oscilloscope in its class. The Agilent breakthrough technology delivers more scope for the same budget.

• Largest screen in its class: 8.5-inch WVGA display
• Fastest update rate of 1,000,000 waveforms per second
• Deepest memory: 4 Mpts (Optional, 2 Mpts interleaved standard)
• Integrated logic timing analyzer
• Built-in 20-MHz function/arbitrary waveform generator
• Hardware-based serial-bus protocol analyzer 
• Digital Voltmeter (DVM) option with 3-digit voltage and 5-digit frequency counter measurements
• Upgradability: add bandwidth, digital channels, or WaveGen after purchase
• Optional serial protocol analysis applications including: I²C, SPI, RS232, UART, CAN, LIN, I²S, MIL-STD 1553, ARINC 429 and FlexRay
• Additional applications including: Segmented memory, mask testing, advanced math and HDTV video
• Power analysis

Performance characteristics of the MSOX3104A:

• Analog bandwidth (-3dB ): 1 GHz
• Analog input channels: 4
• Calculated rise time: ≤450 ps
• Hardware bandwidth limits: 20 MHz selectable
• Input coupling: AC, DC
• Input sensitivity range: 1 mV/div to 5 V/div (1 MΩ), 1mV/div to 1V/div (50 Ω)
• Sample rate on each channel: 2.5 GSa/s; 5 GSa/s half-channel interleaved
• Maximum record length: Standard, 1 Mpt per channel, 2 Mpts half-channel interleaved; With option, 2 Mpts per channel, 4 Mpts half-channel interleaved
• Display: 8.5-inch WVGA with 64 levels of intensity grading
• Waveform update rate (max): 1,000,000 waveforms/s
• Vertical resolution: 8 bits
• Horizontal resolution: 2.5 ps
• Time base range: 500 ps/div to 50 s/div
• Time base delay time range
  • Pre-trigger – Greater of 1 screen width or 250 μs
  • Post-trigger – 1 s to 500 s
• Channel-to-channel deskew range: ± 100 ns
• Channel-to-channel isolation: > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)
• Offset range: ±2 V (2 mV/div to 200 mV/div), ±50 V (> 200 mV/div to 5 V/div)
• Horizontal system digital channels
  • Maximum sample rate: 1.25 GSa/s
  • Maximum record length: max 1.25 GSa/s for the 1 GHz model (with digital channels only); 2 Mpts per channel with DSOX3MEMUP memory upgrade option (with digital channels only)
  • Minimum detectable pulse width: 5 ns
  • Channel-to-channel skew: 2 ns (typical); 3 ns (maximum)
• Vertical system digital channels
  • Digital input channels: 16 digital
  • Thresholds: Threshold per set of 8 channels
  • Threshold selections: TTL (+1.4 V), 5 V CMOS (+2.5 V), ECL (–1.3 V), User-definable (selectable by pod)
  • User-defined threshold range: ±8.0 V in 10 mV steps
  • Maximum input voltage: ±40 V peak CAT I; transient overvoltage 800 Vpk
  • Maximum input dynamic range: ±10 V about threshold
  • Minimum voltage swing: 500 mVpp
  • Input impedance: 100 kΩ ±2% II at probe tip
  • Probe loading: ~8 pF
  • Vertical resolution: 1 bit
• Acquisition modes
  • Normal
  • Peak detect: Capture glitch as narrow as 250 ps at all timebase settings
  • Averaging: Select from 2, 4, 8, 16, 64, up to 65,536
  • High resolution mode: 12 bits of resolution when ≥10 μs/div at 4 GSa/s and 5 GSa/s (1 GHz models) or ≥20-μs/div at 2 GSa/s
  • Segmented (optional): Re-arm time = 1 μs (minimum time between trigger events)
• Trigger modes
  • Normal (triggered): requires trigger event for scope to trigger
  • Auto: triggers automatically in absence of trigger event
  • Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
  • Force: front panel button that forces a trigger
•  Trigger level range
  • Any channel: ± 6 div from center screen
  • External: ± 8 V
• Waveform automatic measurements (Measurements continuously updated with statistics. Cursors track last selected measurement. Select up to four measurements from the list.)
  • Voltage: peak-to-peak, maximum, minimum, amplitude, top, base, overshoot, pre-shoot, average- N cycles, average- full screen, DC RMS- N cycles, DC RMS- full screen, AC RMS- N cycles, AC RMS- full screen (standard deviation), ratio (RMS1/RMS2)
  • Time: period, frequency, counter, + width, - width, burst width, duty cycle, rise time, fall time, delay, phase, X at min Y, X at Max Y
  • Count: positive pulse count, negative pulse count, rising edge count, falling edge count
  • Mixed: area- N cycles, area- full screen
• Input/output ports
  • USB 2.0 hi-speed host port: Two USB 2.0 hi-speed host ports, front and rear panel; Supports memory devices and printers
  • USB 2.0 hi-speed device port: One USB 2.0 hi-speed device port on rear panel
  • LAN port: 10/100Base-T (requires DSOXLAN module)
  • Video out port: Connect oscilloscope display to an external monitor or projector (requires DSOXLAN module)
  • GPIB port: To allow easy migration into existing test systems (requires DSOXGPIB)
  • Probe compensator output: Square wave: 2.5 Vpp, 1 kHz
  • Kensington style lock: Rear-panel security slot connects to standard Kensington-style lock
  • WaveGen out: Front-Panel BNC Connector