keysight agilent DSO1102B

874 Visitors viewed Testwall Ltd ads in the last 30 Days

The Agilent 1000B Series oscilloscopes deliver the performance and features you expect in a big scope – and the portability and low price you require in a small one. We have enhanced the economy scope by giving you powerful signal capture and display, advanced measurement capabilities and accelerated productivity.

• Up to 1 GSa/s sample rate
• Up to 16 kpts memory
• 5.7-inch color LCD display with wide viewing angle
• Simultaneous viewing of main and zoomed waveforms
• 23 automatic measurements
• Waveform math including FFT
• Advanced features including: sequential acquisition of up to 1000 trigger events, go/no go mask testing, and selectable digital filters
• Built-in help menus
• Front panel overlay, GUI and manual available in 11 languages
• Free education student lab guide and professor slide set
• USB connectivity

DSO1102B performance characteristics:

• Bandwidth (-3dB): DC to 100 MHz
• Real-time sample rate: 1 GSa/sec half channel interleaved, 500 MSa/sec all channels
• Memory depth: 16 kpts half channel interleaved, 8 kpts all channels
• Number of channels: 2
• Vertical resolution: 8 bits
• Vertical sensitivity (range): 2 mV/div to 10 V/div
• Vertical zoom: Vertical expand
• Maximum input voltage: CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk
• Dynamic range: +6 divisions from center screen
• Time-base range: 2 nsec/div to 50 sec/div
• Selectable BW limit: 20 MHz
• Horizontal modes: Main (Y-T), XY, delayed zoom and roll
• Input coupling: DC, AC and ground
• Input impedance: 1 MΩ ±2% in parallel with 15 pF ± 3 pF
• Acquisition modes
  • Normal: Displays sampled data directly to the screen in real time
  • Averaging: Selectable from 2, 4, 8,16, 32, 64, 128 or 256
  • Sequence: Selectable 1 to 1,000 acquisition frames can be recorded, played back and stored in the scope memory or external USB memory
  • Peak detect: Captures high-frequency glitches as narrow as 20 nsec when viewing signals at slow sweep speeds
  • Roll: Waveform display rolls from right to left. Minimum horizontal scale setting is 50 msec/div
• Interpolation: Sin (x)/x
• Trigger coupling: AC, DC, LF reject, HF reject
• Trigger modes
  • Force: Triggers immediately when front panel button is pressed
  • Edge: Triggers on the positive and/or negative slope on any channel
  • Video: Triggers on NTSC, PAL or SECAM video signals
  • Pulse width: Triggers on pulse width greater than, equal to or less than a specific time limit, ranging from 50 ns to 10 sec
  • Alternate: Triggers on two non-synchronized active channels
• Trigger source: Ch 1, 2, Ext, AC Line (edge only)
• Cursor measurement: Manual, track waveform or automatic measurement selections. Manual and track waveform selections provide readout of Horizontal (X, ΔX) and Vertical (Y, ΔY)
• Auto measurement
  • Voltage: Maximum, minimum, peak-to-peak, top, base, amplitude, average, RMS, overshoot, preshoot
  • Time: Period, frequency, rise time, fall time, + width, - width, +duty cycle, -duty cycle, delay A-->B (rising edge), delay A-->B (falling edge), phase A-->B (rising edge) and phase A-->B (falling edge)
  • Counter: Integrated 6-digit frequency counter on any channel. Counts up to the bandwidth of the scope
• Display all measurements: Mode to display all single-channel automatic measurements simultaneously on the display
• Math functions: A+B, A-B, AxB, FFT. Source channel selection for A and B can be any combination of oscilloscope channels 1 and 2
• AutoScale: Finds and displays all active channels, sets edge trigger modes on highest numbered channels, sets vertical sensitivity on channels, time base to display ~2 periods. Requires minimum voltage >20 mVpp, 1% duty cycle and minimum frequency >50 Hz
• Display: 5.7 inch diagonal color QVGA TFT LCD display with 300 cd/m² backlight intensity
  • Display persistence: OFF, Infinite
  • Display types: Dots, Vectors
• Waveform update rate: 200 wfm/sec
• Save/Recall internal: 10 setups and 10 waveforms can be saved and recalled using internal non-volatile memory locations. 1 reference waveform can be saved and recalled using an internal volatile memory location for visual comparisons
• Save/Recall external
  • Setups: STP saved and recalled (Note: setups not transferable between A and B models)
  • Waveforms: WFM saved and recalled, CSV saved
  • Reference waveforms: REF saved and recalled for visual comparisons
  • Images: 8-bit BMP, 24-bit BMP, PNG saved
• I/O
  • Standard ports: USB 2.0-compliant host port on front panel; USB 2.0 device port for PictBridge compatible printing
  • Max transfer rate: USB 2.0 full-speed up to 12 Mb/sec
  • USB flash drive compatibility: Most FAT formatted <2 GB or FAT32 formatted <32 GB flash drives
  • Printer compatibility: PictBridge-compliant printers via USB device port