Used Keysight Technologies (Agilent HP) N9928A for sale by Micro Precision Test Equipment | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Analyzers Network Vector Network Analyzers Keysight Technologies (Agilent HP) N9928A For Sale Keysight Technologies (Agilent HP) N9928A

Keysight Technologies (Agilent HP) N9928A

Send Request
Keysight Technologies (Agilent HP) N9928A
  • $19,895

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Keysight Technologies (Agilent HP) N9928A

Categories: Analyzers Network, Vector Network Analyzers

Manufacturer: Keysight Technologies (Agilent HP)

Model: N9928A

Condition: Used

Seller: Micro Precision Test Equipment

KEYSIGHT N9928A 26.5 GHz FIELDFOX HANDHELD VECTOR NETWORK ANALYZER

Product specifications of Keysight Technologies (Agilent HP) N9928A (From Used-Line T&M Specifications)

A standard FieldFox vector network analyzer provides vector transmission and reflection measurements (T/R), or S11 and S21, with magnitude and phase.

The base function of the VNA is a transmission / reflection analyzer (S11, S21), and it can be configured to include full 2-port S-parameters. FieldFox can be ordered with additional capabilities: cable and antenna analyzer, built-in power meter, vector voltmeter, variable DC source, and built-in GPS receiver.

With a full 2-port network analyzer, you can measure the forward and reverse characteristics of your component without having to disconnect, turn around, and reconnect it to the analyzer. The full 2-port calibration gives you the best measurement accuracy possible.

The FieldFox four independent, sensitive receivers provide 94 dB of dynamic range for measurement of high rejection, narrowband devices such as cavity filters. The receivers also enable full 2-port error correction with the unknown thru method, allowing users to measure non-insertable devices accurately and easily.

The FieldFox calibration engine is the same engine that powers the well-respected Agilent ENA and PNA network analyzers. FieldFox leverages Agilent microwave expertise to deliver consistent measurements with Agilent benchtop VNAs.

With the time domain option, FieldFox computes the inverse fourier transform of the frequency-domain data to display reflection or transmission coefficients versus time. Time domain gating can be used to remove unwanted responses such as connector mismatch or cable discontinuities, and the results can be displayed in either time or frequency domain.

Key features of the N9928A Fieldfox handheld microwave vector network analyzer:

  • 30 kHz to 26.5 GHz
  • Directivity >32 dB, dynamic range 100 dB to 9 GHz, 94 dB to 20 GHz
  • Flat output power (± 1 dB) across whole frequency range, adjustable in 1 dB steps
  • All four S-parameters, magnitude and phase
  • Guided Calibration Wizard, full 2-port cal, TRL, waveguide calibration
  • Excellent trace noise and dynamic range
  • Rugged enough to meet MIL-specs
  • Cable and antenna analyzer: Distance-to-fault, return loss, cable loss, 30 kHz to 26.5 GHz
  • Vector voltmeter (VVM) option
  • Built-in power meter option
  • Standard 3-year warranty
  • Battery life: 3.5-hours

N9928A VNA specifications:

  • Frequency range: 30 kHz to 26.5 GHz
  • Data points or resolution: 101, 201, 401, 601, 801, 1001, 1601, 4001, 10,001; Arbitrary number of points settable through SCPI
  • IF bandwidth: 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz
  • System impedance: 50 ohm (nominal), 75 ohm with appropriate adapter and calibration kit
  • Test port output power (typical), Port 1 or 2, high power (default power)
    • 30 kHz to 300 kHz: -11 dBm
    • >300 kHz to 2 MHz: -3 dBm
    • >2 MHz to 625 MHz: -2 dBm
    • >625 MHz to 3 GHz: +1 dBm
    • >=3 to 6.5 GHz: -1 dBm
    • >=6.5 to 9 GHz: -2 dBm
    • >=9 to 14 GHz: -4 dBm
    • >=14 to 18 GHz: -6 dBm
    • >=18 to 23 GHz: -10 dBm
    • >=23 to 26.5 GHz: -12 dBm
  • Power range: High, low, and manual; Low power is -45 dBm, nominal
  • Power step size: Flat power, in 1 dB steps, is available across the whole frequency span, nominal
  • System dynamic range, Port 1 or port 2, high power, 300 Hz IF bandwidth, typical
    • >300 kHz to 9 GHz: 100 dB
    • >=9 to 14 GHz: 97 dB
    • >=14 to 18 GHz: 94 dB
    • >=18 to 20 GHz: 90 dB
    • >=20 to 25 GHz: 79 dB
    • >25 to 26.5 GHz: 70 dB
  • Trace noise: Port 1 or port 2, high power, 300 Hz IF bandwidth
    • >300 kHz to 10 GHz: Magnitude ±0.002 dB (rms); Phase ±0.014 degrees
    • >10 to 20 GHz: Magnitude ±0.004 dB (rms); Phase ±0.027 degrees
    • >20 to 26.5 GHz: Magnitude ±0.010 dB (rms); Phase ±0.066 degrees
  • Measurements
    • T/R: S11, S21
    • S-parameters: S11, S21, S22, S12
  • Calibration types: CalReady, 1-port, QuickCal, 1-port , SOL, 1-port, frequency response, enhanced response (also known as one-path, two-port), CalReady, 2-port QuickCal, 2-port SOLT or offset short, 2-port SOLT calibration, 2-port unknown thru calibration
  • Connectors Type-N 50 ohm, Type-N 75 ohm, 7/16, TNC, 3.5 mm, 2.4 mm, waveguide bands: X-band WR-90, P-band WR-62, K-band WR-42. Custom coaxial or waveguide calibration kits can be added to any FieldFox analyzer

View Similar Listings
Hide Similar Listings

Send a Request

To: Micro Precision Test Equipment
Optional Fields
            
            
            

About Micro Precision Test Equipment

Send to a Friend

Recently Viewed Products