Keysight Technologies (Agilent HP) 83522A used or new for sale at Used-Line
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)

Showing Results for Keysight Technologies (Agilent HP) 83522A

6 results found for Agilent hp 83522a
Showing page 1 of about 1 pages total.
Here you will find a large selection of new and used Keysight Technologies (Agilent HP) 83522A listed at special prices. Although some items match several categories, all of them are listed here, no matter what category or subcategory they have been placed in. You may sort the listings from $1838 to $999 or in reverse. You also have the option of showing only ads that have been posted in the last 24 hours.

Keysight Technologies (Agilent HP) 83522A () Main Features and Specifications

Product Specs

  • Status Discontinued
  • Alternative E4428C ESG Analog Signal Generator

The 83522A is an RF plug-in for the 8350A/B sweep oscillator. The 83522A covers the frequency range of 0.01 to 2.4 GHz. A YIG oscillator is used as the tunable RF frequency source, and a fixed 3.8 GHz oscillator is mixed with the YIG oscillator to generate a 0.01 to 2.4 GHz RF output.

The 83522A front panel functional controls, pushbuttons, and the Rotary Pulse Generator (RPG) are monitored by the 8350A via the RF plug-in interface circuits. The 8350A generates a tuning voltage ramp according to the mode of operation. This voltage ramp is scaled and offset by the 83522A to provide a voltage ramp that is proportional to the YIG oscillator frequency in the 83522A. The 83522A then converts the tuning ramp voltage to a current, which drives the YIG oscillator tuning coil.

The 83522A offers a maximum leveled RF output power of +13 dBm. Internal (INT), External (EXT), and Power Meter (MTR) leveling is available as selected by the front panel pushbuttons. A front panel EXT/MTR ALC input connector and gain control (CAL) are provided to use with an external leveling loop. A front panel LED indicates when the RF output becomes unleveled. The RF output level is controlled by the 83522A RPG, the 8350A data entry controls (keypad and step keys), or through HP-IB control via the 8350A.

  • Frequency range: 0.01 to 2.4 GHz
  • Maximum leveled output power: +13 dBm
  • Calibrated power output range: 15 dB; with Option 002, 85 dB
  • Residual AM in 100 kHz bandwidth (in dB below carrier and at specified maximum leveled power): ≥50 dB
  • Spurious signals at specified maximum leveled power
    • Harmonics in dB below carrier: ≥25 dB
    • Non-Harmonics in dB below carrier: ≥30 dB at 0.01 to 2.1 GHz; ≥25 dB at 2.1 to 2.4 GHz
  • Output VSWR: <1.5
  • Power sweep calibrated range: ≥15 dB 
  • External AM modulation: Maximum input: 15 V
  • Internal AM modulation: Selectable by internal jumper in 8350A to 1 kHz or 27.8 kHz square wave modulation, which allows operation with the 8755A/B/C swept amplitude analyzer. On/off ratio is ≥30 dB below specified maximum leveled power. Symmetry: 40/60
  • External FM modulation: Frequency response (DC to 2 MHz): ±3 dB
  • Internal crystal referenced frequency markers are available to provide Z-axis instensity markers from the 8350A rear panel POZ Z BLANK BNC output or 1 dB amplitiude marker dips on the RF output
  • Harmonic markers of 10 MHz and 50 MHz are available up to 2.4 GHz
  • Minimum sweep time over full band: 10 ms
  • The RF output can be turned off by the RF ON/OFF pushbutton 
  • RF output connector: Type N female