Showing Results for Rohde & Schwarz SMB-B112/L

The analog R&S®SMB100A signal generator delivers excellent signal characteristics and high flexibility at low cost of ownership, perfectly matching the key criteria for a signal source. The technical characteristics of the R&S®SMB100A set new standards in the mid-range, especially the generator’s high output power and signal purity.

The R&S®SMB-B112 includes an electronic step attenuator. The R&S®SMB-B112L is without a step attenuator.

• All-purpose RF source
  • Wide frequency range from 9 kHz to 1.1/2.2/3.2/6 GHz or from 100 kHz to 12.75 GHz covers the main frequency bands for RF applications
  • Overvoltage protection for high operational reliability
  • Support for power sensors of the R&S®NRP-Zxx family
  • All important analog modulations with AM, FM/φM and pulse modulation supported
  • Intuitive user interface with graphical display of signal flow facilitates operation
  • Remote control via LAN, USB and GPIB allows easy integration into the test system
  • Low weight and compact design for a wide range of applications, including mobile applications
• Best signal quality in the mid-range
  • Innovative DDS-based synthesizer concept
  • Very low SSB phase noise of typically –128 dBc (20 kHz carrier offset, 1 GHz carrier frequency, 1 Hz measurement bandwidth)
• High output power as standard
  • Maximum specified output power of +18 dBm over the wide frequency range from 1 MHz to 12.75 GHz with excellent signal quality
  • Low level range down to –120 dBm with no compromise in quality (in underrange down to –145 dBm)
  • High harmonics suppression of typically < –30 dBc even at high output power of +15 dBm
• Ideal for production
  • Wearfree electronic attenuator up to 12.75 GHz ensures long service life even in the case of heavy use in production
  • High level accuracy and repeatability are the basis of high production yield
  • Short setting times for frequency (< 3 ms) and level (< 2.5 ms) via remote control and < 1 ms in the List mode allow high throughput
• Testing of FM stereo and RDS receivers
  • Optional stereo/RDS coder provides full coverage of the frequency range in question
  • Automatic synchronization of measurement results with the R&S®UPV or R&S®UPP audio analyzer
  • Up to five different RDS sequences with up to 64,000 characters each
  • Internal LF generator delivers sinusoidal signals at fixed or swept LF frequencies
• Ready for aerospace and defense applications
  • Optional pulse modulator with typically > 90 dB ON/OFF ratio (up to 11 GHz) and rise/fall time of typically < 5 ns and pulse generator with minimum pulse width of 10 ns for radar system testing
  • Flexible generation of pulse trains for tests on pulse receivers (optional)
  • Wide temperature range of 0 °C to +55 °C and high permissible operating altitude of 4600 m for use even under extreme conditions
  • Reliable erasure of user data for secured areas
• Flexible service concept
  • Servicing on-site or at a Rohde & Schwarz service center
  • Built-in selftest of modules supports troubleshooting
  • Complete calibration recommended only every three years