Used Rohde & Schwarz SGS100A for sale by Testwall Ltd | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Generators Signal Generators Rohde & Schwarz SGS100A For Sale Rohde & Schwarz SGS100A

Rohde & Schwarz SGS100A

98 Visitors viewed Testwall Ltd ads in the last 30 Days

Send Request
Rohde & Schwarz SGS100A

 Add to request cart
Send to a Friend
Flag of IrelandEquipment Location: Ireland      
View Description>
Hide Description

Description of Rohde & Schwarz SGS100A

Categories: Generators, Signal Generators

Manufacturer: Rohde & Schwarz

Model: SGS100A

Condition: Used

Seller: Testwall Ltd

Rohde & Schwarz SGS100A

SGMA RF Source, 6 GHz


 Rohde & Schwarz SGS100A SGMA RF Source  The Rohde & Schwarz SGS100A is an RF source designed to meet the requirements of automated test systems. It is available as a CW source or as a vector signal generator with an integrated I/Q modulator. With its frequency range of up to 12.75 GHz, the vector signal generator version covers the essential digital signals.  It offers performance usually available only from high-end instruments, including high output power, level repeatability and modulation bandwidth. During development, particular emphasis was placed on the total cost of ownership. A long calibration interval, excellent serviceability and options for expansion maximize the availability of the RF source.Production applications require speed during testing to ensure high throughput. The Rohde & Schwarz SGS100A meets this requirement in several ways. Its internal architecture and the software are designed for top speed and the PCIe/ Ethernet interface transmits the remote control commands at maximum speed. Special commands (based on a Rohde & Schwarz driver) can be used to control the generator directly. This eliminates the need for a time-consuming translation of high-level commands in the instrument, again increasing the speed. With these optimizations, the Rohde & Schwarz SGS100A is able to achieve frequency and level setting times of typ. 280 µs. This was previously possible only by using vector signal generators with List modes, but not when issuing individual remote control commands directly. The test sequence can be adapted flexibly in the software without having to renew the frequency lists and the level lists. Specifications for the Rohde & Schwarz SGS100A SGMA RF Source Include: See Datasheet for full specifications     

Product specifications of Rohde & Schwarz SGS100A (From Used-Line T&M Specifications)

  • Launch Date Jun-2011
  • Frequency Range Min. 1 MHz
  • Frequency Range Max. 12.8 GHz
  • Freq. Resolution 1 mHz
  • Output Power –120 dBm to +15 dBm (with option)
  • Modulation Vector,I/Q
  • Status --

The R&S®SGS100A is an RF source designed to meet the requirements of automated test systems. It is available as a CW source or as a vector signal generator with an integrated I/Q modulator. With its frequency range of up to 6 GHz, the vector signal generation version covers the essential digital signals. The CW version, with a range of up to 12.75 GHz, can be used as a flexible local oscillator as well as for interference testing against mobile radio standards.

  • Smallest fully integrated vector signal generator on the market, space-saving design for system integration
  • Enables high throughput due to very short frequency and level setting times of typically 280 μs via PCIe interface
  • Excellent RF performance in a compact format
  • Maximum output level of typically +22 dBm for compensating losses in the setup
  • Closed ALC loop for CW and I/Q modes for highest level repeatability
  • High output frequency up to 12.75 GHz for broad applicability
  • Wear-free electronic attenuator for high reliability
  • Very cost-efficient with low initial costs and low cost of ownership

SGS100A specifications:

  • Frequency range
    • With the R&S®SGS-B106 option: 1 MHz to 6 GHz
    • With the R&S®SGS-B106 and R&S®SGS-B112 options: 1 MHz to 12.75 GHz
    • With the R&S®SGS-B106V option: 80 MHz to 6 GHz (I/Q mode), 1 MHz to 6 GHz (CW mode)
    • Setting time to within < 2 × 10–7 for f > 500 MHz or < 100 Hz for f ≤ 500 MHz with PCIe remote control: < 500 μs
    • Input frequency for external reference: 10 MHz, 100 MHz, 1000 MHz
  • Specified level range
    • -10 dBm to +15 dBm (peak envelope power)
    • With the R&S®SGS-B26 option: –120 dBm to +15 dBm (peak envelope power)
    • Setting time to < 0.1 dB deviation from final value, Setting Characteristic AUTO, with PCIe remote control: < 500 μs
  • Harmonics with level ≤ 8 dBm, CW, I/Q wideband OFF: <-30 dBc
  • Nonharmonics with level > -10 dBm (> 0 dBm for instruments without the  R&S®SGS-B26 electronic step attenuator), offset > 10 kHz from carrier, f ≤ 1.5 GHz: < -76 dBc
  • Subharmonics with level > -10 dBm (> 0 dBm for instruments without the  R&S®SGS-B26 electronic step attenuator), f ≤ 3 GHz: < -76 dBc
  • Wideband noise with 1 MHz ≤ f ≤ 6 GHz and 10 MHz carrier offset, 6 GHz < f ≤ 12.75 GHz and 30 MHz carrier offset, AUTO mode, level > 5 dBm, 1 Hz measurement bandwidth, CW: < –145 dBc
  • SSB phase noise with 20 kHz carrier offset, 1 Hz measurement bandwidth
    • f = 1 GHz: < –126 dBc, –130 dBc (typical)
    • f = 10 GHz: < –106 dBc, –110 dBc (typical)
  • I/Q modulator bandwidth (RF)
    • 100 MHz < f ≤ 2.5 GHz, wideband: 40% of carrier frequency
    • 2.5 GHz < f ≤ 6 GHz, I/Q wideband: 1 GHz
  • Baseband bypass mode
    • Frequency range: 1 MHz ≤ f ≤ 80 MHz
    • Specified level range: -5 dBm to +15 dBm, with the R&S®SGS-B26 option: -120 dBm to +15 dBm
  • Remote control
    • Using Rohde & Schwarz instrument driver: PCIe (single lane)
    • Using SCPI 1999.5 or compatible command sets: Ethernet (TCP/IP) 10/100/1000BaseT
    • Using SCPI 1999.5 or compatible command sets: USB 2.0

View Similar Listings
Hide Similar Listings

Listings similiar to Rohde & Schwarz SGS100A

Send a Request

To: Testwall Ltd
Optional Fields
            
            
            

About Testwall Ltd

Send to a Friend

Recently Viewed Products