Used Rohde & Schwarz SGS100A for sale by Test Equipment Connection Corp. | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Generators Signal Generators Rohde & Schwarz SGS100A For Sale Rohde & Schwarz SGS100A

Rohde & Schwarz SGS100A

1537 Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days

Send Request
Rohde & Schwarz SGS100A

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Rohde & Schwarz SGS100A

Categories: Generators, Signal Generators

Manufacturer: Rohde & Schwarz

Model: SGS100A

Condition: Used

Seller: Test Equipment Connection Corp.

Rohde Schwarz SGS100A This is a SGMA RF Source with hgh output frequency up to 12.75 GHz.

This is a SGMA RF Source with hgh output frequency up to 12.75 GHz. Small and compact with high throughput.
Refurbished

Product specifications of Rohde & Schwarz SGS100A (From Used-Line T&M Specifications)

  • Launch Date Jun-2011
  • Frequency Range Min. 1 MHz
  • Frequency Range Max. 12.8 GHz
  • Freq. Resolution 1 mHz
  • Output Power –120 dBm to +15 dBm (with option)
  • Modulation Vector,I/Q
  • Status --

The R&S®SGS100A is an RF source designed to meet the requirements of automated test systems. It is available as a CW source or as a vector signal generator with an integrated I/Q modulator. With its frequency range of up to 6 GHz, the vector signal generation version covers the essential digital signals. The CW version, with a range of up to 12.75 GHz, can be used as a flexible local oscillator as well as for interference testing against mobile radio standards.

  • Smallest fully integrated vector signal generator on the market, space-saving design for system integration
  • Enables high throughput due to very short frequency and level setting times of typically 280 μs via PCIe interface
  • Excellent RF performance in a compact format
  • Maximum output level of typically +22 dBm for compensating losses in the setup
  • Closed ALC loop for CW and I/Q modes for highest level repeatability
  • High output frequency up to 12.75 GHz for broad applicability
  • Wear-free electronic attenuator for high reliability
  • Very cost-efficient with low initial costs and low cost of ownership

SGS100A specifications:

  • Frequency range
    • With the R&S®SGS-B106 option: 1 MHz to 6 GHz
    • With the R&S®SGS-B106 and R&S®SGS-B112 options: 1 MHz to 12.75 GHz
    • With the R&S®SGS-B106V option: 80 MHz to 6 GHz (I/Q mode), 1 MHz to 6 GHz (CW mode)
    • Setting time to within < 2 × 10–7 for f > 500 MHz or < 100 Hz for f ≤ 500 MHz with PCIe remote control: < 500 μs
    • Input frequency for external reference: 10 MHz, 100 MHz, 1000 MHz
  • Specified level range
    • -10 dBm to +15 dBm (peak envelope power)
    • With the R&S®SGS-B26 option: –120 dBm to +15 dBm (peak envelope power)
    • Setting time to < 0.1 dB deviation from final value, Setting Characteristic AUTO, with PCIe remote control: < 500 μs
  • Harmonics with level ≤ 8 dBm, CW, I/Q wideband OFF: <-30 dBc
  • Nonharmonics with level > -10 dBm (> 0 dBm for instruments without the  R&S®SGS-B26 electronic step attenuator), offset > 10 kHz from carrier, f ≤ 1.5 GHz: < -76 dBc
  • Subharmonics with level > -10 dBm (> 0 dBm for instruments without the  R&S®SGS-B26 electronic step attenuator), f ≤ 3 GHz: < -76 dBc
  • Wideband noise with 1 MHz ≤ f ≤ 6 GHz and 10 MHz carrier offset, 6 GHz < f ≤ 12.75 GHz and 30 MHz carrier offset, AUTO mode, level > 5 dBm, 1 Hz measurement bandwidth, CW: < –145 dBc
  • SSB phase noise with 20 kHz carrier offset, 1 Hz measurement bandwidth
    • f = 1 GHz: < –126 dBc, –130 dBc (typical)
    • f = 10 GHz: < –106 dBc, –110 dBc (typical)
  • I/Q modulator bandwidth (RF)
    • 100 MHz < f ≤ 2.5 GHz, wideband: 40% of carrier frequency
    • 2.5 GHz < f ≤ 6 GHz, I/Q wideband: 1 GHz
  • Baseband bypass mode
    • Frequency range: 1 MHz ≤ f ≤ 80 MHz
    • Specified level range: -5 dBm to +15 dBm, with the R&S®SGS-B26 option: -120 dBm to +15 dBm
  • Remote control
    • Using Rohde & Schwarz instrument driver: PCIe (single lane)
    • Using SCPI 1999.5 or compatible command sets: Ethernet (TCP/IP) 10/100/1000BaseT
    • Using SCPI 1999.5 or compatible command sets: USB 2.0

View Similar Listings
Hide Similar Listings

Listings similiar to Rohde & Schwarz SGS100A

Send a Request

To: Test Equipment Connection Corp.
Optional Fields
            
            
            

About Test Equipment Connection Corp.

Logo of Test Equipment Connection Corp.
Send to a Friend

Recently Viewed Listing Pages

Recently Viewed Products