Mixed Signal Oscilloscope: 2 analog channels, 2.5GS/s sample rate, 10 Mpts record length.
Option: 2-BW-350 = 350MHz Bandwidth.
With TPP0200 200MHz, 10:1 probe (one per channel).
Unit sold with a valid calibration certificate and with 12 months warranty.
More bandwidths and options available.
Analog input channels: 2 or 4 channels (MSO22 has 2 channels)
Bandwidth: 350 MHz
Sample rate: 2.5 GS/s half channels, 1.25 GS/s all channels
Waveform capture rate: >4,000,000 wfms/s
Record length: 10 Mpts per channel
Vertical resolution: 8 bits ADC, up to 16 bits in high-resolution mode
Standard trigger types: Edge, pulse width, runt, timeout, logic, setup & hold, rise/fall time, and parallel bus
Standard analysis:
Cursors: Waveform, V bars, H bars, and V&H bars
Measurements: 37
Plots: XY, limit mask
Math: Basic waveform arithmetic, FFT, and advanced equation editor
Search: Search on any trigger criteria
Serial trigger, decode and analysis:
I2C, SPI, RS-232/422/485/UART, CAN, CAN FD, CAN XL, LIN, Automotive Ethernet 10BASE-T1S, and SENT
(Optional for MSO22 and MSO24)
Digital input channels: 16 inputs
(Optional for MSO22 and MSO24)
Arbitrary function generator:
50 MHz waveform generation
Waveform types: Arbitrary, sine, square, pulse, ramp, triangle, DC level, gaussian, lorentz, exponential rise/fall, sin(x)/x, random noise, haversine, and cardiac
(Optional for MSO22 and MSO24)
Digital pattern generator:
4 bit
User defined, manual, and toggle
(Optional for MSO22 and MSO24)
Display:
10.1-inch TFT color
WXGA (1280 x 800) resolution
Capacitive (multi-touch) touchscreen
Connectivity:
USB 2.0 Device (one port)
USB 2.0 Host (dual-port)
LAN (10/100 MB/s Base-T Ethernet)
Battery pack:
Battery pack with two battery slots and hot-swap capability
Typical usage eight hours with dual batteries
Optional accessory
Remote control:
Remotely view and control the oscilloscope over a network connection through remote Virtual Network Computing (VNC)
VESA mount:
100 mm x 100 mm VESA interface
Security:
Kensington lock, T-Bar style
Software: Security options for connectivity
Standard probes:
One TPP0200 200 MHz, 10:1 voltage probe per channel
Collaborative tools (optional):
TekDrive: Save and recall waveforms, setups, and screenshots from TekDrive cloud. Share data with other members on the team
TekScope: Perform basic instrument control and transfer waveform data to PC. Offline analysis such as protocol decode, automated measurements, etc on saved data
Optional Accessories:
Protective case bundle: Carrying bag, kick stand, protective rubber case
Rackmount kit
Hard case
Battery charger
€ 2,548 (net) $3,058 (US)