Used Tektronix MDO4034C for sale by Testwall Ltd | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Oscilloscopes Mixed Signal Oscilloscopes Tektronix MDO4034-3 For Sale Tektronix MDO4034C

Tektronix MDO4034C

98 Visitors viewed Testwall Ltd ads in the last 30 Days

Send Request
Tektronix MDO4034C

 Add to request cart
Send to a Friend
Flag of IrelandEquipment Location: Ireland      
View Description>
Hide Description

Description of Tektronix MDO4034C

Categories: Oscilloscopes, Mixed Signal Oscilloscopes

Manufacturer: Tektronix

Model: MDO4034-3

Condition: Used

Seller: Testwall Ltd

Tektronix MDO4034C

Mixed Domain Oscilloscope, 350 MHz 4 Ch., 2.5 GS/s, 20 Mpoints


Tektronix MDO4034CThe Tektronix MDO4034C Oscilloscope is a 6-in-1 integrated Oscilloscope that can be configured with an optional spectrum Analyser, arbitrary/ function generator, logic Analyser, protocol Analyser and DVM/frequency counter. When configured with an integrated spectrum Analyser, it is the only instrument that provides simultaneous and synchronized acquisition of analog, digital and spectrum.The TEK MDO4034C is completely customizable and fully upgradable. Add the instruments you need now…. or later. If your challenges include wireless module integration or EMI troubleshooting, this is the scope you want on your bench.Features and benefits of the Tektronix MDO4034C Oscilloscope include:

  • 20 Mpoint record length: Acquire more time while maintaining resolution to zoom in on fine signal details.
  • Wave Inspector® Navigation: Navigate long records easily with intuitive front-panel controls. Automatically search to find and mark every occurrence of an event.
  • FastAcq fast waveform capture: Identify glitches and other infrequent transient signals quickly with more than 340,000 waveforms/s. Understand events of interest with the color-graded display.
  • 4 analog channels – optional 16 digital and 1 RF channel: Synchronized analysis of analog, digital, and RF signals for easy system-level troubleshooting. Trigger on any channel.
  • Integrated spectrum Analyser with wide capture bandwidth: Accurately analyze RF signals with -65 dBc (typical) dynamic range and up to 6 GHz frequency range. Up to 3.75 GHz ultra-wide capture bandwidth to see your entire spectrum at the same time.
  • Advanced RF analysis with SignalVu-PC Vector Signal Analysis Software: Enables Bluetooth and WLAN (IEEE 802.11 a/b/g/n/p/ac) signal quality analysis, pulse analysis, audio measurements, AM/FM/PM modulation analysis, general purpose digital modulation and more.
  • Integrated arbitrary/function generator: Always have a built-in 50 MHz function generator close at hand. Easily capture real signals, edit them, and replay them with tight integration between your Oscilloscope and 128 kpoint arbitrary waveform generator.
  • Integrated logic Analyser: Debug the digital portions of your designs with timing resolution down to 60.6 ps. Trace system timing issues with broader system visibility.
  • Serial bus triggering and analysis: Automates triggering and decode on up to three serial buses at once. Save time locating events of interest and avoid hand-translating bits.
  • Integrated digital voltmeter and frequency counter: Free with product registration! Enables quick measurements of DC voltage, AC+DC RMS, AC RMS and frequency.Upgradeability Upgrades are available to analog bandwidth, spectrum Analyser arbitrary function generator, digital channels (MSO), serial trigger and analysis packages, and more – ensuring usefulness for years to come.
  • Offline Waveform Analysis: Enables better time and resource utilization; view, measure, and analyze data captured in your lab, independent of scope hardware with TekScope AnywhereTM

    • Specifications of the Tektronix MDO4034C include:

  • 4 analog channels; 16 optional additional digital channels
  • 350 MHz bandwidth
  • Up to 2.5 GS/s sample rate
  • 20 M record length on all channels
  • > 340,000 wfm/s maximum waveform capture rate
  • Standard passive voltage probes with 3.9 pF capacitive loading and 500 MHz analog bandwidth
  • Unique optional Built-in 3 GHz or 6 GHz Spectrum Analyser
  • Optional Arbitrary/Function Generator
  • Optional 16-channel Logic Analyser w/ 20 M record length on all channels
  • Optional Protocol Analyser
  • Digital Voltmeter/Frequency Counter – Free from Tektronix w/ registration
  • Upgradeability: Add analog bandwidth, spectrum Analyser, function generator, digital channels, or protocol analysis as needed

    •     

    Product specifications of Tektronix MDO4034C (From Used-Line T&M Specifications)

    • Launch Date Oct-2012
    • Type Benchtop Portable
    • Bandwidth 350 MHz
    • Scope Channels 4
    • Digital Channels 16
    • Memory Depth 20 Mpoints record length
    • Sample Rate 2.5 GSa/sec
    • Status --

    Introducing the world’s first and only mixed domain oscilloscope. For the first time ever, you can capture time-correlated analog, digital and RF signals for a complete system view of your device. See both the time and frequency domain in a single glance. View the RF spectrum at any point in time to see how it changes with time or device state. Solve the most complicated design issues, quickly and efficiently, with an oscilloscope as integrated as your design.

    • 4 analog channels: 1 GHz, 500 MHz, 350 MHz, and 100 MHz bandwidth models
    • 16 digital channels: MagniVu™ high-speed acquisition provides 60.6 ps fine timing resolution
    • 1 RF channel: 50 kHz to 3 GHz or 50 kHz to 6 GHz frequency range models; Ultra-wide capture bandwidth ≥1 GHz

    Key features:

    • Mixed-domain analysis
      • Time-correlated analog, digital, and RF signal acquisitions in a single instrument
      • Wave Inspector® controls provide easy navigation of time-correlated data from both the time and frequency domains
      • Amplitude, frequency, and phase vs time waveforms derived from RF input
      • Selectable spectrum time to discover and analyze how RF spectrum changes over time - even on a stopped acquisition
    • Spectral analysis
      • Dedicated front-panel controls for commonly performed tasks
      • Automated peak markers identify frequency and amplitude of spectrum peaks
      • Manual markers enable non-peak measurements
      • Trace types include: Normal, Average, Max Hold, and Min Hold
      • Detection types include: +Peak, -Peak, Average, and Sample
      • Spectrogram display enables easy observation and insight into slowly changing RF phenomena
      • Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
      • Trigger on RF power level
      • Triggered or Free Run spectral analysis
    • Optional serial triggering and analysis - serial protocol trigger, decode, and search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM
    • 10.4 inches (264 mm) bright XGA color display
    • Small footprint and lightweight - Only 5.8 inches (147 mm) deep and 11 lb (5 kg)
    • Connectivity
      • Two USB 2.0 host ports on the front panel and two on the rear panel for quick and easy data storage, printing, and connecting a USB keyboard
      • USB 2.0 device port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer
      • Integrated 10/100/1000BASE-T Ethernet port for network connection and video out port to export the oscilloscope display to a monitor or projector

    MDO4034-3 specifications:

    • Analog channels: 4
    • RF channels:1
    • Digital channels: 16
    • Analog channel bandwidth: 350 MHz
    • Rise time: 1 ns
    • Sample rate: 2.5 GS/s
    • Record length: 20 M
    • RF channel
      • Frequency range 50 kHz - 3 GHz
      • Real-time capture bandwidth ≥1 GHz
      • Span 1 kHz - 3 GHz, in a 1-2-5 sequence
      • Resolution bandwidth 20 Hz - 10 MHz in a 1-2-3-5 sequence
      • Vertical scale 1 dB/div to 20 dB/div in a 1-2-5 sequence
      • Vertical position -10 divs to +10 divs
      • Vertical units dBm, dBmV, dBμV, dBμW, dBmA, dBμA
      • Displayed average noise level (DANL): 50 kHz - 5 MHz <-130 dBm/Hz; 5 MHz - 3 GHz <-148 dBm/Hz
      • Spurious: 2nd and 3rd harmonic distortion (>30 MHz) <-55 dBc; 2nd order intermodulation distortion <-55 dBc; 3rd order intermodulation distortion <-60 dBc; Other A/D spurs <-55 dBc; Image and IF Rejection <-50 dBc
      • Residual response <-78 dBm
      • Phase noise at 2 GHz CW: 10 kHz <-90 dBc/Hz; 100 kHz <-95 dBc/Hz; 1 MHz <-113 dBc/Hz
      • Residual FM ≤100 Hz peak-to-peak in 100 ms
      • Maximum operating input level: Average continuous power +30 dBm (1 W); DC maximum before damage ±40 V DC; Maximum power before damage (CW) +33 dBm (2 W)
      • RF to analog channel skew <5 ns
      • Frequency domain trace types Normal, Average, Max Hold, Min Hold
      • Time domain trace types: Amplitude vs Time, Frequency vs Time, Phase vs Time
      • Automatic markers One to eleven peaks identified based on user-adjustable threshold and excursion values
      • Manual markers Two manual markers indicating frequency, amplitude, noise density, and phase noise
      • RF acquisition length 2.5 ms to 79 ms, depending on span
    • Vertical system analog channels
      • Hardware bandwidth limit: 20 MHz or 250 MHz
      • Input coupling: AC, DC
      • Input impedance: 1 MΩ ±1%, 50 Ω ±1%
      • Vertical resolution: 8 bits (11 bits with Hi Res)
      • Maximum input voltage: 1 MΩ 300 Vrms CAT II with peaks ≤±425 V; 50 Ω 5 Vrms with peaks ≤±20 V
    • Vertical system digital channels
      • Input channels: 16 digital
      • Maximum input voltage: ±42 Vpeak
      • Input dynamic range: 30 Vp-p ≤200 MHz; 10 Vp-p >200 MHz
      • Vertical resolution: 1 bit
    • Horizontal system analog channels
      • Time base range: 1 ns to 1000 s
      • Maximum duration at highest sample rate: 8 ms
      • Time-base delay time range: -10 divisions to 5000 s
      • Channel-to-channel deskew range: ±125 ns
    • Horizontal system digital channels
      • Maximum sample rate (Main): 500 MS/s (2 ns resolution)
      • Maximum record length (Main): 20M points
      • Minimum detectable pulse width (typical): 1 ns
      • Channel-to-channel skew (typical): 200 ps
    • Trigger system
      • Trigger modes: Auto, Normal, and Single
      • Trigger holdoff range: 20 ns to 8 s
      • Trigger types: Edge, Sequence (B-trigger), Pulse Width, Runt, Logic, Seup and Hold, Rise/Fall Time, Video, Parallel, and many optional types
    • Acquisition modes
      • Sample: Acquire sampled values
      • Peak Detect: Captures glitches as narrow as 1.6 ns at all sweep speeds
      • Averaging: From 2 to 512 waveforms included in average
      • Envelope: Min-max envelope reflecting Peak Detect data over multiple acquisitions
      • Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
      • Roll: Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div
    • Waveform measurements: Cursors, automatic measurements in the time and frequency domains, statistics, gating, histogram and histogram measurements, waveform math
    • Optional power measurements and limit/mask testing
    • Display: 10.4 inch (264 mm) liquid-crystal TFT color display, 1,024 horizontal × 768 vertical pixels (XGA), Sin(x)/x interpolation
    • Input/output ports: USB 2.0 high-speed host port, USB 2.0 device port, LAN port, Video out port, Probe compensator output voltage and frequency (amplitude: 0 to 2.5 V; frequency: 1 kHz), Auxiliary out, External reference input, Kensington-style lock, VESA mount
    • LAN eXtensions for Instrumentation (LXI): LXI Class C, Version V1.3

    View Similar Listings
    Hide Similar Listings

    Send a Request

    To: Testwall Ltd
    Optional Fields
                
                
                

    About Testwall Ltd

    Send to a Friend

    Recently Viewed Listing Pages