Tek THS3024

With four isolated channels and up to 7 hours of battery life, the lightweight THS3000 Handheld Oscilloscope Series enables you to safely make floating or differential measurements on your bench or in the field. Now you can tackle tough environments with the performance you expect from Tektronix – safely and affordably.

• Four isolated channels: Safely and easily make 4-channel floating or differential measurements, including 3-phase power measurements
• Key performance specifications
  • 100 MHz or 200 MHz Bandwidth Models
  • Maximum Sample Rates up to 5 GS/s and 200 ps Resolution
  • 4 Fully Isolated and Floating Channels 
  • 600 VRMS CAT III, 1000 VRMS CAT II Rated Inputs (BNC to Earth Ground)
• 10 Kpoints record length per channel: Capture more signal information at higher sample rates to clearly see signal details
• Dedicated front-panel controls: Spend less time learning and more time on your task with easy-to-use front-panel controls
• Waveform limit testing: Automatically monitor up to four signals and evaluate pass or fail results determined by predefined boundaries
• Data logging features: Quickly find signal anomalies by using the TrendPlot™ function or by capturing multiple waveform screens for playback and review
• Waveform Pass/Fail Limit Testing
• Automatic 100 Display Screens Recorder
• 6 inch (153 mm) Bright Color Display, 320 horizontal × 240 vertical pixels 
• 7 hour battery: Work where you need to with up to 7 hours of continuous battery operation
• Just 4.8 lbs (2.2 kg): Easily transport from the lab to the field with the lightweight and compact design
• USB host and USB mini ports: Quickly and easily save instrument settings, screenshots, and waveform data onto a flash device or transfer the data directly to a PC

THS3024 characteristics:

• Vertical
  • Isolated input channels: 4
  • Analog bandwidth (-3 dB): 200 MHz
  • Rise time: 1.7 ns
  • Hardware bandwidth limits: 20 kHz, 20 MHz, or full
  • Input coupling: AC, DC
  • Imput impedance: 1 MΩ ±1%, 14 pF ±2 pF
  • Vertical resolution: 8 bits
  • Trace positioning: ±4 divisions
• Horizontal
  • Maximum sample rate: 5 GS/s (1.25 GS/s 4-ch)
  • Maximum record length (all channels): 10,000 points (30,000 points in Roll mode (4 ms to 2 min/div))
  • Time-base range (s/div): 2 ns to 4 s
  • Delay time range: 1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger
• Triggers
  • Input source: Channel 1, 2, 3, or 4. All input references isolated from each other and earth ground
  • Main trigger modes: Auto-level, Auto, Normal, and Single
  • Trigger Coupling: DC, HF Reject, Noise Reject (reduces sensitivity)
  • Trigger level range (any channel): ±4 divisions
  • Trigger modes: Edge, Pulse Width, Event, Video, Non-interlaced
• Acquisition modes
  • Sample (Default): Acquire sampled values
  • Glitch Detect: Captures high frequency or glitches as narrow as 8 ns from 5 μs to 120 s/div
  • Averaging: Selectable from 2, 4, 8, or 64 waveforms
  • Roll: Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 4 ms/div
  • Data Recorder: Automatic data logging of 100 triggered records (screens) with date and time stamp. Store internally or to a USB device
  • Waveform Compare: Visually compare against user-definable reference waveforms or perform automatic Pass or Fail testing of 1 to 4 channels with data logging of test results
• Automatic setup
  • Autoset: Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems
  • Autorange: Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes
• Measurements (waveform)—Up to four can be displayed on the screen at any one time: Vdc, VacRMS, Vac+dc, Vpeak max, Vpeak min, peak-to-peak, Adc, Aac, Aac+dc, frequency, rise time (using cursors), fall time (using cursors), phase (between any 2 inputs), positive pulse width, negative pulse width, positive duty cycle, negative duty cycle, dBv, dBm into 50 Ω and 600 Ω
• Math (waveform)
  • Arithmetic: Add, subtract, and multiply waveforms
  • FFT: Spectral magnitude. Set FFT Vertical Scale to Linear or Logarithmic, and FFT Window to Automatic, Hamming, Hanning, or None
• Storage memory
  • Reference: 4 user-definable reference traces
  • Waveform: Stores 30 internal scope records (4 traces each) with screen image and corresponding setup
  • Recording: Store 10 internal recordings that can be a 100-screen replay sequence, a Roll-mode recording, or a TrendPlot™ measurement recording
  • Screen Image: Store up to 9 internally or 256 BMP images to an external USB storage drive
  • Real-time Clock: Time and date stamp of all stored data