The WaveRunner 6 Zi defines superiority in a test instrument with a powerful feature set including a wide range of application packages, advanced triggering to isolate events, a user interface developed for quick and easy navigation, a wide range of probing options, and lightning-fast performance.
WaveRunner 6 Zi offers the most tools for serial data analysis. With over 17 trigger, decode, and compliance solutions, WaveRunner 6 Zi can address problems with unique, powerful views and automated tools. The unique measurement toolset, ProtoSync, combines the oscilloscope view with a simultaneous view of data link layer decodes on the same instrument.
The WaveRunner 6 Zi oscilloscope family features a pristine signal path that offers unmatched signal fidelity with low noise. This performance is augmented by a huge offset and timebase delay adjustment to allow easy signal and amplifier performance assessment and zooming on vertical and horizontal signal characteristics.
A powerful combination of high bandwidth edge and 10 different SMART triggers, four stage cascade triggering, measurement trigger, and triggerscan are all standard and allow you to isolate the problem quickly and begin focus on the cause. The measurement trigger offers a powerful option to qualify a trigger event based on a qualified measurement with great resolution. A high-speed serial trigger enables triggering on up to 3 Gb/s serial patterns of up to 80-bits in length. A full range of serial triggers (I2C, SPI, UART, RS-232, Audio (I2S, LJ, RJ, TDM), CAN, LIN, FlexRay, MIL-STD-1553, SATA, PCIe, 8b/10b, USB2 and many others) are also available.
The WavePilot control area provides convenient control of Cursors, Decode, WaveScan, History, LabNotebook, and Spectrum by their respective function buttons on the front panel.
The SuperKnob is a joystick-like knob in the center of the WavePilot control area used to easily navigate through tables, zoom and position waveforms, and quickly document and annotate your setups.
Simply slide the button on the left side of the display and rotate upwards 90º. The display will automatically change from landscape to portrait mode. The display will also pivot upwards and downwards to optimize viewing angle.
- Industry leading performance—400 MHz—4 GHz, 40 GS/s, 128 Mpts of analysis memory
- 12.1" Widescreen (16 x 9) high resolution WXGA color touch screen display
- 90º rotating and tilting display for optimal viewing of signals
- Small footprint, only 8.1" deep
- Easy connectivity with two convenient USB ports on the front, two on the side
- USBTMC (Test and Measurement Class) port simplifies programming
- X-Stream™ II streaming architecture for faster analysis and excellent responsiveness
- Deepest toolbox with more measurement, more math, more power
- Largest selection of serial triggers and decoders—more than 17—available to provide a total system view
- Serial trigger captures signals up to 3 Gb/s
- WavePilot consolidates important oscilloscope debug features in one place. LEDs illuminate to indicate navigation options and active oscilloscope features
- The SuperKnob provides joystick control to easily navigate to key debug and documentation features
- LBus provides easy connection to the optional mixed signal feature, providing up to 36 digital channels
- Wide array of probes and accessories to accommodate any probing challenge
Specifications for WaveRunner 640Zi:
- Vertical
- Nominal Analog Bandwidth @ 50 Ω 10 mV-1 V/div: 4 GHz (≥ 5 mV/div)
- Rise Time (10–90%): 100 ps (typical)
- Rise Time (20–80%): 75 ps (typical)
- Input Channels: 4
- Bandwidth Limiters: 20MHz, 200MHz, 1GHz
- Input Impedance: 50 Ω±2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe
- Maximum Input Voltage: 50 Ω: 5V RMS ± 10V peak, 1 MΩ: 400 Vmax (DC + peak AC < 10 kHz)
- Channel-Channel Isolation: > 100:1 up to 2.5GHz, > 50:1 from 2.5GHz to rated BW
- Vertical Resolution: 8 bits; up to 11 bits with enhanced resolution (ERES)
- Horizontal
- Trigger and Interpolator Jitter: ≤ 2 psrms (typical), <0.1 psrms (typical, software assisted)
- External Clock: DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies
- Acquisition
- Single-Shot Sample Rate/Ch: 20 GS/s on 4 Ch, 40 GS/s on 2 Ch
- Memory Options (4 Ch / 2 Ch / 1Ch): S-32 Option—32M / 64M / 64M; M-64 Option—64M / 128M / 128M
- Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments): 16 M / 32 M / 32M (4,500)
- Enhanced Resolution (ERES): From 8.5 to 11 bits vertical resolution
- Maximum Trigger Frequency, SMART Trigger: 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
- High Speed Serial Protocol Triggering
- Data Rates: 320 Mb/s - 3 Gb/s
- Pattern Length: 80 bits, NRZ or 8b10b
- Clock Recovery Jitter: 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density
- Hardware Clock Recovery Loop: BW PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
- LeCroy WaveStream™ Fast Viewing Mode Maximum Sampling Rate: 20 GS/s (40 GS/s when interleaved)
- Auxiliary Input Maximum Input Voltage: 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)