PNA-X Microwave Network Analyzer 10MHz-43.5GHz
options:
010 = Time-domain measurements;
080 = Frequency offset measurements;
083 = Vector and scalar calibrated converter measurements;
084 = Embedded LO measurements;
086 = Gain compression application;
200 = 2-port standard test set and power range;
219 = Extended power range and bias-tees
World´s widest range of single-connection measurement applications
The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
(This unit has 43.5 GHz.)
Replace racks and stacks:
Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.
Applications:
S-parameters (CW and pulsed)
Noise figure
Gain compression
Intermodulation and harmonic distortion
Conversion gain/loss
True-differential stimulus
Millimeter-wave
Nonlinear waveform and X-parameter characterization
Antenna test
Bandwidth: 10 MHz to 43.5 GHz
2- or 4-ports with two built-in sources (This unit has 2 ports.)
126 dB system and 129 receiver dynamic range, 32,001 points, 32 channels,
5 MHz IF bandwidth
High output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB)
Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver
Low noise floor of -111 dBm at 10 Hz IF bandwidth
€ 85,000 (net) $102,000 (US)