Used Agilent 432A for sale by HTB Elektronik | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Meters Power Meters Keysight Technologies (Agilent HP) 432A For Sale Agilent 432A

Agilent 432A

Send Request
Agilent 432A
  • $175

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent 432A

Categories: Meters, Power Meters

Manufacturer: Keysight Technologies (Agilent HP)

Model: 432A

Condition: Used

Seller: HTB Elektronik

Agilent / Hewlett Packard 432A

The HP 432A is an analog power meter which is characterized by high accuracy. The power is calculated by measuring the output voltage of the thermistor. For this power meter, coaxial and waveguide sensors are available.

Specification:


Measurement Range (depending on sensor used):
With HP 478A:
10MHz to 10GHz
With HP 8478B:
10MHz to 18GHz
With HP X486A:
8,2 to 12,4GHz
With HP P486A:
12,4 to 18GHz
With HP K486A:
18 to 26,5GHz
With HP R486A:
26,5 to 40GHz


Zero: Automatic, operated by front-panel switch


Recorder Output: Proportional to indicated power


Calibration Factor Control: Front-panel adjustment


Condition: Used
In stock

Product specifications of Agilent 432A (From Used-Line T&M Specifications)

  • Launch Date
  • Alternative N432A Thermistor Power Meter
  • Sensors 8.5 k
  • Channels 1
  • Freq. Range Low 100 kHz
  • Freq. Range High 110 GHz
  • Status Discontinued by Manufacturer

The Agilent 432A provides high accuracy over a wide temperature range. By measuring the output voltage of the thermistor bridges and computing the corresponding power, even higher accuracy of ±0.2 percent ±0.5 microW can be obtained. Accuracy can be maintained on even the most sensitive range because the error due to thermoelectric effect is reduced to a negligible level.

  • Power Range: 7 ranges with full-scale readings of 10, 30, 100 and 300 µW 1, 3 and 10 mW; also calibrated in dBm from -20 dBm to +10 dBm full scale in 5 dB steps
  • Noise: Less than 0.25% of full scale peak (typical)
  • Response Time: At recorder output, 35 ms time constant (typical)
  • Fine Zero: Automatic, operated by front-panel switch
  • Zero Carryover: Less than 0.50% of full scale when zeroed on most sensitive range
  • Meter: Taut-band suspension, individually calibrated, mirror-backed scales. Milliwatt scale more than 100 mm (4.25 in) long
  • Calibration Factor Control: 13-position switch normalizes meter reading to account for thermistor sensor calibration factor. Range 100% to 88% in 1% steps Thermistor Sensor:
  • Thermistor sensors are required for operation of the 432A.
  • Power Consumption: 115 to 230 Vac ± 10%, 50 to 400 Hz, 1.5 watts
  • No thermoelectric error for high accuracy over a wide dynamic range

View Similar Listings
Hide Similar Listings

Listings similiar to Agilent 432A

Send a Request

To: HTB Elektronik
Optional Fields
            
            
            

About HTB Elektronik

Send to a Friend

Recently Viewed Products