Keysight Technologies (Agilent HP) 35677A used or new for sale at Used-Line
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)

Showing Results for Keysight Technologies (Agilent HP) 35677A

4 results found for Agilent hp 35677a
Similar models:  Keysight Technologies (Agilent HP) 3577A  Keysight Technologies (Agilent HP) 35677B
Showing page 1 of about 1 pages total.
Here you will find a large selection of new and used Keysight Technologies (Agilent HP) 35677A listed at special prices. Although some items match several categories, all of them are listed here, no matter what category or subcategory they have been placed in. You may sort the listings from $995 to $249 or in reverse. You also have the option of showing only ads that have been posted in the last 24 hours.

Keysight Technologies (Agilent HP) 35677A () Main Features and Specifications

Product Specs

  • Status Discontinued

See also

The HP 35677A is a 100 kHz to 200 MHz scattering parameter test set built for use with the 3577A network analyzer. Although test setups can be constructed from discrete RF components such as power dividers, directional bridges, cables, and pads, it is much easier to use a fully integrated test set such as the 35677A. The 35677A has 50 ohm test ports. This test set provides a convenient method for making reflection and transmission measurements of one- and two-port devices. The 3577A provides signal, power, and control for the test set and provides a menu that includes S-parameter softkey selections in S11, S21, S12, and S22. These are defined in terms of receiver inputs and test set direction. Changing the test set direction effectively switches the signal source and termination of the device under test as though it were removed and reconnected to the test set in the reverse direction. Different S-parameters may be selected for each of the two traces.

  • Frequency range: 100 kHz to 200 MHz
  • Test port impedance: 50 ohms
  • Directivity: >40 dB
  • Frequency response - Transmission (S21, S12): +/-1 dB
  • Frequency response - Reflection (S11, S22): +/-1 dB
  • Port match (Test ports 1, 2): >26 dB
  • Port match (Test ports 1, 2 - open/short ratio): <+/-0.75 dB magnitude and <+/-5 degrees phase
  • Port match input port: >20 dB return loss
  • Port match output ports A, B, and R: >26 dB
  • Test port isolation: >100 dB
  • Insertion loss (RF input to test port 1 or 2): 13 dB typical
  • Insertion loss (RF input to output ports A, B, or R): 19 dB typical
  • Test port reciprocity - Transmission (S21, S22): <+/-0.5 dB magnitude and <+/-5 degrees phase (typical)
  • Test port reciprocity - Reflection (S11, S22): <+/-0.5 dB magnitude and <+/- 5 degrees phase
  • Test port reciprocity - Incident power ratio (Test port 1 to test port 2): <+/-1.5 dB typical
  • RF input maximum operating level: +25 dBm
  • Rf input damage level: +/-27 dBm
  • Port 1 or 2 damage level: +/-27 dBm
  • DC bias range: +/-30 Vdc and +/-20 mA with some degradation of RF specifications typical; 200 mA damage level
  • Connectors:
    • Input port and output ports A, B, and R: 50 ohm Type N female
    • Test ports 1 and 2: 50 ohm Type N female
    • DC bias inputs: BNC female, rear panel
  • Options:
    • Front handle kit
    • Rack mounting kit
    • Front handle and rack mount kit