Showing Results for Keysight Technologies (Agilent HP) 35660A

The HP 35660A dynamic signal analyzer is both a one-channel and a two-channel FFT signal analyzer. As a one-channel analyzer its frequency measurement range is 488 µHz to 102.4 kHz. As a two-channel analyzer, its frequency measurement range is 244 µHz to 51.2 kHz. The analyzer also contains a built-in signal source and, unless optionally deleted, a disc drive.

On the front panel, there are three active BNC connectors: Channel 1 input, Channel 2 input, and a source output. On the rear panel, there are also three connectors: a BNC connector for an external trigger input, a 25-pin connector for the HP-IB, and a 9-pin connector.

• Amplitude input range: +27 dBV to -51 dBV
• Dynamic range: 70 dB
• CMR
  • -51 to -11 dBV: >80 dB, typical
  • -9 to +9 dBV: >60 dB, typical
  • +11 to +27 dBV: >40 dB, typical
• Frequency measurement range
  • Channel 1: 488 µHz to 102.4 kHz, single channel mode
  • Channel 1 and 2: 244 µHz to 51.2 kHz, dual channel mode
• Single channel phase accuracy, 488 µHz to 10.24 kHz: ±4.0°
• Source
  • Maximum output level: ±5 Vpk
  • Maximum current: ±20 mA
  • Maximum capacitive load: 1000 pF