Seller: Micro Precision Test Equipment
Location: USA
Seller: Avalon Test Equipment
Seller: Rosenkranz Elektronik
Location: Germany
Seller: NSCA Technologies LLC
Seller: Instrumex GmbH
Seller: Liberty Test Equipment, Inc.
Seller: Valuetronics International Inc
Seller: Testwall Ltd
Location: Ireland
Seller: Test Equipment Experts
A total of six current probes are available for use with the AM503B and AM5030 Current Probe Amplifiers. Since all six probes are of the split-core mechanical design, they easily clip on and off of a conductor. All the probes provide simultaneous DC and AC current measurements with a wide range of current amplitude and bandwidth capabilities.
The A6312, A6302 and A6303 offer a wide range of current measurement capability for the lab and bench environment. The A6312 covers frequencies from DC to 100 MHz while the A6302 covers DC to 50 MHz. Both clip onto conductors up to 3.81 mm (0.15 in.) and measure continuous currents up to 20 A and peak currents up to 50 A as long as they do not exceed the amp*second product of 100 A*μs.
The larger A6303 measures higher amplitude, lower frequency currents. It clips onto conductors up to 21.1 mm (0.83 in.) in diameter. Its frequency range is DC to 15 MHz. It will measure continuous currents up to 100 A and peak currents up to 500 A, as long as the Amp*second product of 10,000 A*μs is not exceeded.
The A6302 and A6303 are also compatible with the 11A16 2-CH Current Probe Amplifier for the 11000 and DSA Series oscilloscopes. With the 11A16, the A6302 is rated for 10.5 A, and the A6303 for 52.5 A.