Seller: Valuetronics International Inc
Location: USA
The Agilent 6115A is a highly accurate, stable, and easy-to-use voltage source and intended for use as a low-cost calibrator, working voltage standard, system reference supply, and high performance lab supply. It is completely solid-state and features constant voltage / constant current operation, automatic dual-range operation, overvoltage crowbar protection, front panel voltage and current metering, and provisions for remote voltage and current programming. In addition, it is capable of auto-series, auto-parallel, and auto-tracking operation. Front panel mounted controls allow current limit and overvoltage trip points to be conveniently set, while Overvoltage and Current Mode light emitting diodes indicate when the corresponding condition is in effect.
The 6115A uses a front panel mounted four digit pushbutton control to increase and decrease output voltage in unit steps. A thumbwheel control is used to set the fifth (least significant) digit for output voltage accuracy in the fractional millivolt range. A single meter, combining both voltage and current functions, is also located on the front panel. A Meter slide switch selects the function to be indicated on the meter.
The 6115A can be operated in eiether of two ranges: 0 to 50 V at 0 to 0.8 A, or 50 to 100 V at 0 to 0.4 A. Automatic voltage range crossover occurs if the load current exceeds approximately 0.4 A and the output voltage has been set above 50 V.
The 6115A can be used as a current source.