Showing Results for Fluke 190-502

As the first two- and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the new Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness, and portability. You can choose from 60 MHz, 100MHz, 200MHz, or 500 MHz bandwidth models, with real-time sampling rates up to 5 GS/s and 200 ps resolution to capture noise and other disturbances. The models feature deep memory—up to 10,000 samples per channel— so you can examine very small parts of the waveform in detail. And the scopes are IP-51 rated to withstand dust, drips, humidity, and wide temperature variations.  Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.

The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes, and hands free operation with Connect-and-View™ triggering.

• Two or four electrically isolated inputs
• CAT III 1000V / CAT IV 600V safety rated
• Choose from 60MHz, 100MHz, 200MHz, or 500 MHz bandwidth models
• Single shot, pulse width, and video triggering
• Fast sampling rate, up to 5GS/s with up to 200 ps resolution
• Deep memory: 10,000 samples per channel waveform capture so you can zoom in to the details
• Dedicated 5000 Count digital multimeter in 2 Channel models
• Quad meter measurements via scope BNC inputs in 4 channel models
• Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
• ScopeRecord roll mode, capture waveform sample data for up to 48 hours
• TrendPlot, trend measurement readings for up to 22 days
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity
• Li-Ion battery for extended operating timespan
• Easy-access battery door to make it easy to swap batteries
• A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

190-502 specifications:

• Oscilloscope
  • Bandwidth: 500 MHz
  • Number of channels: 2
  • Rise time: 0.7 ns 
  • Input sensitivity: 2 mV - 100 V/div 
  • Vertical resolution: 8 bit
  • Input impedance: 1 MΩ ± 1%, 14 pF ± 2 pF
  • Real-time sample rate: 5 GS/s (single channel) or 2.5 GS/s (on 2ch)
  • Maximum record length: 10,000 samples per channel in scope mode; 30,000 points per channel in ScopeRecord™ Roll mode
  • Timebase range: 1 ns - 4 s/div
  • Glitch capture: 8 ns
  • Trigger types: Connect-and-View™, Free Run, Single Shot, Edge, Delay, Video, Selectable pulse width and External, dual slope trigger and Event trigger (n-cycle)
  • Scope measurements: Cursor: 7, Automatic: 30
  • Acquisition modes: Normal, Averaged, Auto, Single Shot, ScopeRecord™ roll, glitch capture, waveform compare with automatic “Pass/Fail testing”, Replay
  • Automatic scope measurements: Vdc, Vac rms, Vac+dc, Vpeak max, Vpeak min, Vpeak to peak, Aac, Adc, Aac+dc, frequency (in Hz), risetime (using cursors), falltime (using cursors), Power Factor (PF), Watts, VA, VA reactive, phase (between any 2 inputs), pulsewidth (pos./neg.), dutycycle (pos./neg.), temperature °C, temperature °F, dBV, dBm into 50 #937; and 600 O, VPWM ac and VPWM ac+dc for measurement on pulsewidth modulated motordrives and frequency inverters, mA*s (current-over-time, between cursors), V*s (voltage over time, between cursors), W*s (energy, between cursors)
  • Cursor measurements: Source on any input waveform or on mathematical resultant waveworm (excluding X-Y-mode); dual horizontal lines with voltage at cursor 1 and at cursor 2, voltage between cursors; dual vertical lines with time between cursors, 1/T between cursors (in Hz), voltage between markers, risetime with markers, falltime with markers, Vrms between cursors, watts between cursors; single vertical line with Min-Max and Average voltage at cursor postition, frequency and rms-value of individual frequency component in the FFT Result; zoom in ranges from full record overview to zoom in up to sample level, at any record length
• DMM
  • Meter inputs: 4 mm banana inputs, fully isolated from scope inputs and from scope ground
  • Maximum resolution: 5000 counts
  • Measurements: Vdc, Vac rms, Vac+dc rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature ºC or ºF (using optional converter)
  • Advanced meter functions Auto/manual ranging, relative measurements (Zero reference), TrendPlot™ recording
  • Input impedance: 1 MΩ ± 1 % // 14 pF ± 2 pF
• Recorder (ScopeRecord™)
  • Bandwidth: 20 MHz or 20 kHz
  • Memory depth: 30,000 data points
  • Min/Max values: Min/max values are created at samples that are measured at high sample rate ensuring capture and display of glitches
  • Recording modes: Single sweep, continuous roll, Start-on-Trigger (through external), Stop-on-Trigger (through external)
  • Memory: Two multiple input ScopeRecord waveforms can be saved internally for later recall and analysis. Direct storage on external flash memory drive through USB host port
  • Time base range: 5 ms/div ~ 2 min/div
  • Recorded timespan: 6 s ~ 48 hr
  • Glitch capture: 8 ns
  • Sample rate: 125 MS/s
  • Resolution: 200 µs ~ 4.8 s