Showing Results for Tektronix DPO4054B

The MSO/DPO4000B Series offers a robust set of features to speed every stage of debugging your design – from quickly discovering an anomaly and capturing it, to searching your waveform record for the event and analyzing its characteristics and the behavior of your device.

Offering up to 1 GHz bandwidth and 5 GS/s sample rate, the MSO/DPO4000B delivers the performance you need to see fast-changing signal details. With as many as 20 channels, you can analyze analog and digital signals with a single instrument. Combine that with automated serial and parallel bus analysis, innovative Wave Inspector® controls, and automated power measurements, and the MSO/DPO4000B Series provides the feature-rich tools you need to simplify and speed debug of your complex design.

• 1 GHz, 500 MHz, 350 MHz Bandwidth Models
• 4 Analog Channel Models
• 16 Digital Channels (MSO Series)
• Up to 5 GS/s Sample Rate on All Channels
• 20 Megapoint Record Length on All Channels
• >50,000 wfm/s Maximum Waveform Capture Rate
• Standard Passive Voltage Probes with Less than 4 pF Capacitive Loading and 500 MHz or 1 GHz Analog Bandwidth
• Suite of Advanced Triggers
• Wave Inspector® Controls provide Easy Navigation and Automated Search of Waveform Data
• 41 Automated Measurements, Waveform Histograms, and FFT Analysis for Simplified Waveform Analysis
• TekVPI® Probe Interface supports Active, Differential, and Current Probes for Automatic Scaling and Units
• 10.4 inches (264 mm) Bright XGA Color Display
• Small Footprint and Lightweight – Only 5.8 inches (147 mm) deep and 11 lb (5 kg)
• Two USB 2.0 Host Ports on the Front Panel and Two on the Rear Panel for Quick and Easy Data Storage, Printing, and Connecting a USB Keyboard
• USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or Direct Printing to a PictBridge®-compatible Printer
• Integrated 10/100/1000BASE-T Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
• Optional Automated Serial Triggering, Decode, and Search Options for I²C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM

DPO4054B characteristics:

• Vertical system
  • Input channels: 4
  • Analog bandwidth: 500 MHz
  • Calculated rise time (typical): 700 ps 
  • Hardware bandwidth limits: 20 MHz or 250 MHz
  • Input coupling: AC, DC
  • Imput impedance: 1 MΩ ±1%, 50 Ω ±1%
  • Vertical resolution: 8 bits (11 bits with Hi Res)
  • Maximum input voltage, 1 MΩ: 300 Vrms CAT II with peaks ≤ ±425 V
  • Maximum input voltage, 50 Ω: 5 Vrms with peaks < ±20 V
• Horizontal system
  • Maximum sample rate (all channels): 2.5 GS/s
  • Maximum record length (all channels): 20 Mpoints
  • Maximum duration at highest sample rate (all channels): 8 ms
  • Time base range: 1 ns to 1000 s
  • Channel-to-channel deskew range: ±125 ns
• Trigger system
  • Main trigger modes: Auto, Normal, and Single
  • Trigger coupling: DC, AC, HF reject (attenuates >50 kHz), LF reject (attenuates <50 kHz), noise reject (reduces sensitivity)
  • Trigger holdoff range: 20 ns to 8 s
• Trigger level range
  • Any channel: ±8 divisions from center of screen
  • External (auxiliary input): ±8 V
  • Line: Fixed at about 50% of line voltage
• Trigger modes: Edge, Sequence (B-trigger), Pulse Width, Timeout, Runt, Logic, Setup and Hold, Rise/Fall Time, Video
• Optional trigger modes: Extended Video, I²C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, I²S/LJ/RJ/TDM
• Acquisition modes
  • Sample: Acquire sampled values
  • Peak Detect: Captures glitches as narrow as 800 ps (1 GHz models) or 1.6 ns (500 MHz and 350 MHz models) at all sweep speeds
  • Averaging: From 2 to 512 waveforms included in average
  • Envelope: Min-Max envelope reflecting Peak Detect data over multiple acquisitions
  • Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
  • Roll: Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div
• Waveform measurements: Cursors, 29 automatic measurements, statistics measurements, reference levels, gating, waveform histogram
• Waveform math: Arithmetic, integrate, differentiate, FFT, advanced algebraic expressions
• Options: Power measurements, limit/mask testing
• Display
  • Display Type: 10.4 inch (264 mm) liquid-crystal TFT color display
  • Display Resolution: 1,024 horizontal × 768 vertical pixels (XGA)
  • Waveform Styles: Vectors, Dots, Variable Persistence, Infinite Persistence
  • Graticules: Full, Grid, Solid, Cross Hair, Frame, IRE, and mV
  • Format: YT and simultaneous XY/YT
  • Waveform Capture Rate: >50,000 wfm/s maximum
• Input/output ports
  • USB 2.0 High-speed Host Port: Supports USB mass storage devices, printers and keyboard. Two ports on front and two ports on rear of instrument
  • USB 2.0 Device Port: Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488), and direct printing to all PictBridge-compatible printers
  • LAN Port: RJ-45 connector, supports 10/100/1000 Mb/s
  • XGA Video Port: DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector
  • Auxiliary Input: Front-panel BNC connector. Input Impedance 1 MΩ. Max input 300 Vrms CAT II with peaks ≤ ±425 V
  • Probe Compensator Output: Front-panel pins. Amplitude: 2.5 V. Frequency: 1 kHz
  • Auxiliary Out: Rear-panel BNC connector. Vout (Hi): ≥2.5 V open circuit, ≥1.0 V 50 Ω to ground. Vout (Lo): ≤0.7 V into a load of ≤4 mA; ≤0.25 V 50 Ω to ground. Output can be configured to provide a pulse out signal when the oscilloscope triggers, the internal oscilloscope reference clock out, or an event out for limit/mask testing
  • External Reference In: Time-base system can phase lock to an external 10 MHz reference (10 MHz ±1%)
  • Kensington Lock: Rear-panel security slot connects to standard Kensington lock
  • VESA Mount: Standard (MIS-D 100) 100 mm VESA mounting points on rear of instrument
• Lan eXtensions for Instrumentation (LXI): LXI Class C, V1.3