Showing Results for LeCroy (Teledyne LeCroy) HDO6034

HDO6000 oscilloscopes combine Teledyne LeCroy's HD4096 high definition technology with powerful analysis and debug tools, long memory, in a compact form factor with a 12.1" multi-touch display.

• HD4096 high definition technology enables oscilloscopes to capture and display signals of up to 1 GHz with high sample rate and 16 times more resolution than other oscilloscopes
• 12-bit ADC resolution, up to 15 bits with enhanced resolution
• 350 MHz, 500 MHz and 1 GHz bandwidths
• Long Memory - up to 250 Mpts/Ch
• 12.1" Multi-touch screen display with small footprint: Easily control channels, trigger, math and measurements with the large multi-touch display and intuitive interface
• Spectrum Analyzer Mode standard: View signal details in the frequency domain with a spectrum analyzer style user interface
• WaveScan - Advanced Search and Find: Quickly locate analog or digital waveforms for runts, glitches or other anomolies
• History Mode - Waveform Playback: Scroll back in time to isolate anomalies and quickly find the source of the problem
• Complete set of solutions available for embedded, digital, power, and automotive designs extends analysis
• Comprehensive set of waveform math and measurement tools extends the debugging and analysis capability
• JITKIT Clock-Data Jitter Analysis
• Serial Data Trigger and Decode: View decoded protocol information on top of physical layer waveforms and trigger on protocol specific messages
• LabNotebook Report Generation: Save all results and data with a single button press and create custom reports
• Advanced Trigger Tools including TriggerScan and Software Assisted Trigger
• Simple Power Measurements

HDO6034 specifications: 350 MHz, 2.5 GS/s, 4 Ch, 50 Mpts/Ch, 12-bit HD Oscilloscope with 12.1" WXGA Touch Display.

• Vertical system
  • Bandwidth: 350 MHz
  • Rise time: 1 ns typical, 10% - 90%, 50 Ω
  • Input Channels: 4
  • Bandwidth Limiters: 20 MHz, 200 MHz
  • Input Impedance: 1 MΩ ±2.0% || 15 pF, 50 Ω ±2.0%
  • Input Coupling: 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
  • Maximum Input Voltage: 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz), 50 Ω: 5 Vrms
  • Channel-Channel Isolation: >1000:1 up to rated BW
  • Vertical Resolution: 12 bits
• Horizontal system
  • Timebases: Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
  • Time/Division range: Real-time: 20 ps/div–10,000 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100ms/div to 10,000s/div at ≤5 MS/s
  • Jitter noise floor: 700 fs
  • Channel-Channel deskew range: ±9 x time/div setting, 100 ms maximum, each channel
• Acquisition system
  • Sample rate: 2.5 GS/s on 4 Ch
  • Single-Shot Sample Rate/Ch: 2.5 GS/s on 4 Ch
  • Random Interleaved Sampling (RIS): 125 GS/s, user selectable for repetitive signals (20 ps/div to 10 ns/div)
  • Maximum Trigger Rate: 1,000,000 Triggers/sec (in Sequence Mode, up to 4 channels)
  • Intersegment Time: 1 µsec
  • Standard memory: 50 M
  • Memory options: 100 M, 250 M
  • Maximum acquisition memory points: 250 Mpts on all 4 channels
  • Acquisition processing: Averaging - summed or continuous to 1 million sweeps, Enhanced Resolution (ERES) - from 12.5 to 15 bits vertical resolution, Envelope - Extrema (Envelope, floor, or roof for up to 1 million sweeps), Interpolation (Linear or Sin x/x)

• Triggering system
  • Basic triggers: Edge, Window, TV-Composite Video
  • SMART triggers: State or Edge Qualified, Qualified First, Dropout, Pattern
  • Modes: Normal, Auto, Single, Stop
  • Sources: Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
  • Pre-trigger Delay: 0–100% of memory size (adjustable in 1% increments of 100 ns)
  • Post-trigger Delay: 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode
  • Hold-off by Time or Events: From 2 ns up to 20 s or from 1 to 99,999,999 events
  • Low speed Serial Protocol triggering (optional): I²C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, MIL-STD-1553, USB 1.x/2.0, AudioBus
  • Measurement trigger: Trigger on Measurement with qualified limits. Can be used as only trigger or last event in cascade
• Cascade (sequence) triggering
  • Capability: Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on "A" event, then Qualify on "B" then "C" event, and Trigger on "D" event
  • Types: A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, Pattern (analog), or Measurement
  • Holdoff: Holdoff between A and B, B and C, C or D is selectable by time or number of events
  • Reset: Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events
• Color waveform display: Color 12.1 inch widescreen flat panel TFT-Active Matrix with high resolution touch screen, WXGA, 1280 x 800 pixels; Maximum 16 traces; Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y grid styles; Sample dots joined or sample dots only
• Auxiliary
  • Input: Select External Trigger or External Clock Input on the front panel, 50 Ω: DC coupling; 1 MΩ: AC, DC, GND coupling, 50 Ω:  5 Vrms maximum input voltage; 1 MΩ: 400 Vmax (DC + Peak AC ≤5 kHz) maximum input voltage
  • Output: BNC, on rear panel, Select from control signals or Off, 500 Hz - 1 MHz square wave or DC level output signal; 50 mV - 1 V into 1 MΩ, Trigger enabled, trigger out, pass/fail status, off control signals
• Interfaces: GPIB port (optional), USBTMC (device) port, Ethernet port, USB 2.0 ports, External monitor port, Remote control via Windows automation or Teledyne LeCroy Remote Command Set