Fluke 8012A used or new for sale at Used-Line
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)

Showing Results for Fluke 8012A

2 results found for Fluke 8012a
Similar models:  Fluke 8010A
Showing page 1 of about 1 pages total.
Here you will find a large selection of new and used Fluke 8012A listed at special prices. Although some items match several categories, all of them are listed here, no matter what category or subcategory they have been placed in. You may sort the listings by price. You also have the option of showing only ads that have been posted in the last 24 hours.

Fluke 8012A () Main Features and Specifications

Product Specs

  • Status Discontinued

See also

The Fluke 8012A is a portable bench-type digital multimeter with a 3½ digit liquid crystal display.

  • Voltage measurements from 100 µV to 1000 Vdc and 10 mV to 750 Vac (TRMS)
    • DC volts: Range ±200 mV, ±2 V, ±20 V, ±200 V, ±1000 V; accuracy ±(0.1% of reading + 1 digit); input impedance 10 MΩ; normal mode rejection ratio >60 dB at 60 Hz (50 Hz with 50 Hz option); common mode rejection ratio >90 dB at dc, 50 Hz, 60 Hz
    • AC volts: Range 200 mV, 2 V, 20 V, 200 V, 750 V; Volts · Hz product 107 max (200 V max at 50 kHz); extended frequency response typically ±3 dB at 200 kHz; common mode noise rejection >60 dB at 50 Hz and 60 Hz; crest factor range 1.0 to 3.0; input impedance 10 MΩ in parallel with <100 pF
  • Current measurements from 100 nA to 2 Adc and 10 µA to 2 Aac (TRMS)
    • DC current: Range 200 µA, 2 mA, 20 mA, 200 mA, 2000 mA; accuracy ±(0.3% of reading + 1 digit)
    • AC current: Range 200 µA, 2 mA, 20 mA, 200 mA, 2000 mA; crest factor range 1.0 to 3.0
  • Resistance measurements from 1 mΩ to 20 MΩ
    • Range: 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2000 kΩ, 20 MΩ; resolution: 0.1 Ω to 10 kΩ; open circuit voltage: <3.5 V
    • Low resistance range: 2 Ω (LO Ohms), 20 Ω (LO Ohms); resolution: 1 mΩ, 10 mΩ; open circuit voltage: 16 V maximum
  • Resistance ranges that supply enough voltage to turn on a PN junction for testing diodes and transistors - Diode test: 2 kΩ, 200 kΩ, 20 MΩ: These three ranges have enough voltage to turn on silicon junctions to check for proper forward-to-back resistance. The 2 kΩ range is preferred and is marked with a larger diode symbol on the front panel. The three non-diode test ranges will not turn on silicon junctions, so in-circuit resistance measurements can be made with these three ranges
  • Conductance measurements up to 10000 MΩ of equivalent resistance: Range 2 mS, 20 µS, 200 nS
  • Automatic polarity indication and overrange indication
  • Protection from overloads and transients up to 6 kV for 10 microseconds
  • Dual-slope integration a/d conversion to ensure noise-free measurements

Get Price Quotes

Fluke 8012A Opts: no option
  • €78