IN STOCK
Categories: Transmitters, Tester Transmitters
Manufacturer: Anritsu
Model: MS8608A
Condition: Used
Seller: Hitech&Facility
ANRITSU MS8608A
9KHz-7.8GHz Digital Mobile Transmitter TesterIn stockSpectrum Analyzer: Frequency Range:9kHz-7.8GHzMax input level: High Power Input +40dBm(10W) Low Power Input +20dBm(100mW)Input N(f) 50ohm(High Power) SMA(f) 50ohms(Low Power) I,Q BNC(f)Reference 10MHz <5*10E-8/day Warmup 10minPower Meter 30MHz-3GHz -20-+40dBm acc10% Pre-selecter range:3.15GHz-7.8GHzRBW:300Hz-3MHz,VBW:1Hz-3MHz,Sideband Noise:-108dBc/HzReference level:-100-+50dBmSweep range:10ms-1000sMeasurement: Maximum output power,Occupied Bandwidth,Adjacent channel leakage power ratio,Suprious,RF Power,Modulation Analysis,Frequency tolerance,EVM and Phase error,Constellation,Code domainColor TFT LCD 6.5inch Memory-CARD ATA-Flash GP-IB Centro-Printer Dsub25 VGA Dsub15 320W177H411D 16Kg Ac100-240V 400VA Software OPT;MX860901A1:W-CDMA Analysis
The MS8608A and MS8609A are transmitter testers equipped with an internal spectrum analyzer, a modulation analyzer and a power meter. Just one tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations.
The MS8608A supports 9 kHz-7.8 GHz and high power inputs up to +40 dBm. The MS8609A supports 9 kHz-13.2 GHz and input power up to +20 dBm.
The spectrum analyzer has resolution bandwidths up to 20 MHz, meaning that it can readily support measurements of wide-band signals. It is ideal for evaluating devices such as base station power amplifiers, due to its wide dynamic ranges of 68 dB (typical for 5 MHz offset) and 75 dB (typical for 10 MHz offset) for adjacent channel power (ACP) measurement (sweep method). The modulation analyzer realizes all Vector Signal Analysis (VSA) functions through high-speed DSP. The power sensor can perform highly accurate power measurements of ±0.4 dB by using an amorphous power sensor.
Up to three measurement software options (such as W-CDMA, GSM/EDGE, HSDPA, WLAN/802.11, CDMA, 1xEVDO) can be installed simultaneously. Input signals can be selected from RF or I/Q inputs. For I/Q signals, balanced or unbalanced input can also be selected.
Each tester can be equipped with optional GPIB, RS-232C, and 10BASE-T Ethernet interfaces for remote measurement. High-speed GPIB data transmission of 120 kbyte/sec enables high-speed measurement on the manufacturing line. The monitor uses an easy-to-see TFT color LCD.
Seller Test Equipment Connection Corp.
Seller Valuetronics International Inc
Seller Rosenkranz Elektronik
Used-Line Dealer since : 2014
Company info
We are specialized in
Our Services
Our Sales Policy
Disributor of
Use this form to contact a dealer from the Dealer Directory. You may contact up to 10 Dealers per day. Please note: Contact forms are monitored for spam. Users who send spam will be blocked from Used-Line.
To:
Remember me
*Contact name, email and message are required.
Product Specs
(From Used-Line T&M Specifications)
Description: