58 Visitors viewed Amabile Electronic Test LLC ads in the last 30 Days
Categories: Testers, Hipots
Manufacturer: QuadTech
Model: Hybrid 2000
Condition: Used
Seller: Amabile Electronic Test LLC
QuadTech The Hybrid 2000 Analyzer is a complete dielectric testing solution wit
QuadTech The Hybrid 2000 Analyzer is a complete dielectric testing solution with AC Hipot, DC Hipot, Insulation Resistance and DC Resistance testing capability. The Hybrid 2000 combines these four test modes with eight HV scan channels for fast multi-point testing. The Hybrid 2000 has Open/Short Circuit detection for establishing proper device connection and Load/Line regulation to ensure easurement integrity. The digital display and user friendly controls allow test parameters and limits to be set without the high voltage activated. Perform hipot & contact resistance testing with one instrument Automatic switching for multi-point testing Monitor resistance while checking intermittent connections Insulation resistance testing up to 5000V DC AC Dielectric Withstand Voltage 50 to 5000VAC, Current to 30mA DC Dielectric Withstand Voltage 50 to 6000VDC, Current to 10mA IR Measurements from 1MΩ to 50GΩ, Test Voltage 50 to 5000VDC DC Resistance Measurements from 50mΩ to 100kΩ Real and Total Current Measurement Built-in Scanner with 8 HV Output Channels for Multi-Point Testing Programmable Hi/Lo Limits for Pass/Fail Testing Ability to Perform Multiple Tests in Sequence Internal Storage and Recall of 50 Test Setups, 20 Steps Each Programmable Ramp, Dwell, Test and Fall Times Open/Short Circuit Check to Ensure the Device is Connected Pause Mode Allows the Operator to Change Device Connection & Continue Front Panel Lockout Prevents Changes to the Test Setup Automatic Offset to Zero Out Residual Current Ground Fault Interrupt (GFI) for auto shutdown if current imbalance >0.5mA Fast Cutoff and Quick Discharge of Device Under Test RS232 Interface Included Standard Front Panel Output Connection Built-In Operator Prompted
The Hybrid 2000 Analyzer is a complete dielectric testing solution with AC Hipot, DC Hipot, Insulation Resistance and DC Resistance testing capability. The Hybrid 2000 combines these four test modes with eight HV scan channels for fast multi-point testing. The Hybrid 2000 has Open/Short Circuit detection for establishing proper device connection and Load/Line regulation to ensure easurement integrity. The digital display and user friendly controls allow test parameters and limits to be set without the high voltage activated.
Used-Line Dealer since : 2010
Company info
We are specialized in
Our Services
Our Sales Policy
Disributor of
Use this form to contact a dealer from the Dealer Directory. You may contact up to 10 Dealers per day. Please note: Contact forms are monitored for spam. Users who send spam will be blocked from Used-Line.
To:
Remember me
*Contact name, email and message are required.
Product Specs
(From Used-Line T&M Specifications)
QuadTech 2000
Description: