National Instruments USB-6366 Multifunction I/O Device
The USB-6366 (Part Numbers: 781445-02, 781445-01, 782264-01, 782263-01, 782262-01) by National Instruments is a multifunction data acquisition (DAQ) device designed for a wide range of industrial automation applications. Along with digital I/O, four 32-bit counters/timers, and analog input/output, it provides simultaneous sampling capability. It is appropriate for jobs like test automation, control, and data logging because of its adaptability. The NI USB-6366 is available in several variants depending on connector type. The device can be found with either BNC connection (part number 782263-01), mass termination connection (part number 782264-01), or screw terminal connectors (part numbers 781445-01 and 781445-02, with 32 MS and 64 MS memory capacities respectively). Part number 782262-01 is the identifying part number for the board-only kit version of the multifunction device..
The USB-6366 offers eight differential channels with 16-bit resolution and a guarantee of no missing codes for analog input. The device has a timing precision of 50 ppm and a timing resolution of 10 ns, supporting sample rates of up to 2.00 MS/s per channel. In order to reduce signal distortion, it has a high input impedance (>100 GΩ) and many input ranges (-10 V to +10 V).
With ±1 LSB maximum DNL and 16-bit resolution, the USB-6366 provides two channels for analog output. For precise signal transmission, it has a low output impedance of 0.4 Ω and can achieve a maximum update rate of 3.3 MS/s per channel. Also, to prevent against voltage spikes, the gadget has overdrive protection (±25 V).
The USB-6366 is equipped with NI-STC3 onboard timing and synchronization technology, which offers separate analog and digital timing engines and sophisticated timing functions. It can operate at up to 3.4 MHz in bandwidth and offers a number of trigger modes and functionalities, such as analog edge and analog window triggering.
The USB-6366 complies with all applicable safety standards, including CSA C22.2 No. 61010-1, EN 61010-1, UL 61010-1, and IEC 61010-1. For all analog input channels, it provides overvoltage protection (±36 V), and for APFI 0, it provides overdrive protection (±30 V).
Several data transfer modes, including USB Signal Stream and DMA, are included with the device. It comes with NI-DAQmx, a thorough driver and configuration tool for simple setup and measurement.
Delivery: UPS, FedEX and DHL – Free Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
Returns: No hassle return policy.
Dedicated customer service team.
Warranty: All of our products are covered by our Apex Waves Warranty.
✓
3 Year Warranty - New Surplus Parts
✓
2 Year Warranty - Refurbished Parts