TESEQ KEMA 801A

243 Visitors viewed Avalon Test Equipment ads in the last 30 Days

The efficient Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6 is suitable for high decoupling and can be used on almost any cable

The Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6 is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method. It shall be inserted on all the cables between EUT and AE except the cable under test. The KEMA 801A prevents, that the test signal applied to the EUT affects other devices, equipment or systems, which are not under test and improves the reproducibility of the test results. The clamp mechanism of the KEMA 801A makes possible a simple insertion in the test setup. Other application: Prevention of unwanted RF- currents at cables during emission measurements.