Fluke 2620A

241 Visitors viewed Alltest ads in the last 30 Days

The Fluke Hydra Series is available in three models to fit many application requirements. The 2620A Hydra Data Acquisition Unit is a compact front end for use with your PC. The portable 2625A Hydra Data Logger features non-volatile memory that stores more than 2000 scans, for stand-alone applications. And the 2635A Hydra Data Bucket with its removable memory card for data and set-up storage is ideal for remote monitoring applications.

The Hydra Series Data Acquisition Unit (Model 2620A) is a multi-channel data acquisition unit able to measure ac and dc voltages, temperature via thermocouples and RTDs, resistance, and frequency. It features 21 measurement channels, 8 digital input/output lines, a Totalizer input, and 4 alarm output lines. The Data Acquisition Unit is easily carried by hand and can be ac or dc powered. The user can choose communications with a host computer over an RS-232 (standard) or IEEE-488 (2620A/05) computer interface.

• DC voltage inputs ranges: 300 mV to 300 V
• Input impedance: 100 MΩ minimum in parallel with 150 pF maximum for all ranges 3V and below 10 MΩ in parallel with 100 pF maximum for the 30V and 300V ranges
• Normal mode rejection: 53 dB minimum at 60 Hz ±0.1%, slow rate, 47 dB minimum at 50 Hz ±0.1%, slow rate
• Common mode rejection: 120 dB minimum at dc, 1 kΩ imbalance, slow rate, 120 dB minimum at 50 or 60 Hz ±0.1%, 1 kΩ imbalance, slow rate
• Maximum input: 300V dc or ac rms on any range for channels 0,1, and 11, 150V dc or ac rms for channels 2 to 10 and 12 to 20
• AC voltage inputs ranges: 300 mV to 300 V
• Maximum crest factor: 3.0
• Common mode rejection: 80 dB minimum at 50 or 60 Hz ±0.1%, 1 kΩ imbalance, slow rate
• Maximum AC Input: 300V rms or 424V peak on channels 0, 1, and 11, 150V rms or 212V peak on channels 2 to 10 and 12 to 20
• 2- and 4-wire ohms ranges: 300 Ω to 10 MΩ
• Temperature Measurement: Thermocouple types J, K, E, T, N, R, S, and B, and Hoskins Engineering Co type C are supported. Also, DIN/IEC 751 Platinum RTDs are supported
• Frequency ranges: 15 Hz to >1 MHz
• Digital input voltages: 30 V maximum, -4 V minimum

The Hydra Series 2620A data acquisition unit is ideal for applications that require direct connection to a PC for real-time data collection.

• Easy-to-use front-end. An RS-232 serial interface makes it easy to connect the Hydra Data Acquisition Unit to a PC or modem for real-time data acquisition. The 2620A can also be used as a 20 channel panel meter
• IEEE interface. An optional IEEE-488 interface allows you to easily integrate the 2620A with other IEEE-488 instruments and your PC. The 2620A delivers workhorse performance for a wide variety of applications such as test and monitoring systems
• Channel Scanning: Can be continuous scanning, scanning at an interval time, single scans, or triggered (internal or external) scans
• Channel Monitoring: Make measurements on a single channel and view these measurements on the display
• Channel Scanning and Monitoring: View measurements made for the monitor channel while scanning of all active channels continues
• Multi-Function Display: Left (numeric) display shows measurement readings; also used when setting numeric parameters. Right (alphanumeric) display used for numeric entries, channel number selection and display, status information, and operator prompts
• Front-Panel Operation: Almost all operations can be readily controlled with the buttons on the front panel
• Measurement Input Function and Range: Volts dc (VDC), volts ac (VAC), frequency (Hz), and resistance (W) inputs can be specified in a fixed measurement range. Autoranging, which allows the instrument to use the measurement range providing the optimum resolution, can also be selected
• Totalize Events on the Totalizing Input
• Alarm Limits and Digital Output Alarm Indication
• 4-Terminal Resistance Measurements (Channels 1 through 10 only)
• RS-232 Computer Interface Operation
• Measurement Rate Selection
• Nonvolatile Memory: Storage of minimum, maximum, and most recent measurements for all scanned channels. Storage of Computer Interface setup, channel configurations, and calibration values