Signal Analyzer 20Hz-26.5GHz,
unit with options:
B4 = OCXO, low aging/ improved phase noise at 10Hz carrier offset;
B25 = Electronic attenuator 30dB, 20dB preamplifier 3.6 GHz;
B28 = 25pin trigger port female connector;
B71 = Analog baseband inputs DC36MHz;
B72 = I/Q bandwidth extension;
B100= I/Q memory extension to 235MSa;
B102= I/Q memory extension from 235MSa to 705MSa;
K5 = GSM/ EDGE firmware;
K10 = GSM/EDGE/EDGE Evolution/VAMOS measurement;
K70 = Firmware general purpose vector signal analyzer;
K72= 3GPP-BTS/ NodeB-FDD firmware;
K73 = 3GPP-UE-FDD firmware;
K74 = 3GPP-HSDPA-BTS firmware;
K76 = 3GPP-TD-SCDMA-BTS firmware;
K91 = WLAN IEEE 802.11 a/b/g/j firmware;
K92 = WiMAX 802.16-2004 OFDM firmware;
K100 = EUTRA/LTE FDD downlink signal analysis;
K101 = EUTRA/LTE FDD uplink signal analysis;
K105= EUTRA/LTE TDD uplink signal analysis; and
U3 = Upgrade WIN-XP.
Unit sold with a valid calibration certificate.
The R&S FSQ is the solution for all development and production measurement tasks. It offers very low phase noise, unsurpassed low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard.
Frequency range from 20 Hz to 3.6/8/26.5/40 GHz (This unit has 26.5 GHz)
28 MHz signal analysis bandwidth, optionally 120 MHz
Outstanding RF characteristics:
TOI typ. +25 dBm
1 dB compression point +13 dBm
84 dBc ACLR/3GPP with noise correction
–173 dBm (1 Hz) displayed average noise level (DANL) with noise correction and R&S FSU-B24 preamplifier
Trace detectors: Max Peak, Min Peak, Auto Peak, Sample, RMS, Average,
Quasi Peak
Analysis of signals in the analog and digital baseband
Numerous firmware applications extending the signal analysis capabilities
16 Msample I/Q memory, expandable up to 705 Msample
€ 44,800 (net) $53,760 (US)