Anritsu MS2711E

Regulatory requirements are growing. You are under increasing pressure to cut costs. And improving system uptime is always a top priority. The MS2711E Spectrum Master helps you do all of this and more. Whether you are performing complex interference analyses or assessing signal quality, the MS2711E Spectrum Master delivers the ease of use, rich functionality, and best-in-class price/performance you have come to expect from Anritsu.

Designed to handle the most punishing field conditions, the MS2711E allows you to monitor wireless systems easier than ever before. Measurements include received signal strength (RSSI), channel power, adjacent channel power ratio (APCR), and occupied bandwidth measurements that can confirm the distortion level or channel power level of an AMPS, TDMA, CDMA or GSM transmitter. Additionally, the MS2711E can locate and identify out-of-band spurious signals when analyzing a wireless base station transmitter, while the field strength mode allows users to measure propagation and coverage, or to pinpoint electromagnetic (EM) leakage in broadcast systems. Measurement of carrier to interference ratio is included.

• Spectrum Analyzer, Interference Analyzer with Interference Mapping
• Field-proven design: Three-hour battery life, rugged, compact, lightweight, daylight viewable display
• Intuitive menu-driven touchscreen user interface
• 6 Markers, limit lines and segmented limit lines
• Store 2000 Traces internally
• Channel Scanner Option, GPS, AM/FM/PM Analyzer 
• Internal Preamplifier Option
• Internal Power Meter Option
• High Accuracy Power Meter Option
• 4, 6, 8, 18, 26 GHz Power Sensors
• 5 minute warm-up time
• USB Data Transfer
• Automatic, manual, and dynamic attenuator control
• Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Spectral Emission Mask
• Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID, Interference Mapping
• Dynamic Range: > 85 dB in 100 Hz RBW
• DANL: -142 dBm in 100 Hz RBW with preamp option 0008
• Phase Noise: -90 dBc/Hz max @ 10 kHz offset at 1 GHz
• Frequency Accuracy: < ±50 ppb with GPS On
• Master Software Tools
• 3 hour battery operation time

MS2711E spectrum analyzer specifications:

• Frequency
  • Frequency Range: 100 kHz to 3 GHz (usable to 0 Hz)
  • Tuning Resolution: 1 Hz
  • Frequency Span: 10 Hz to 3 GHz including zero span
  • Sweep Time: Minimum 100 ms, 10 μs to 600 seconds in zero span
• Bandwidth
  • Resolution Bandwidth (RBW): 100 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth)
  • Video Bandwidth (VBW): 10 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable)
• Amplitude Ranges
  • Dynamic Range: > 85 dB (2.4 GHz), 2/3 (TOI-DANL) in 100 Hz RBW
  • Measurement Range: DANL to +26 dBm
  • Display Range: 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed
  • Reference Level Range: -120 dBm to +30 dBm
  • Attenuator Range: 0 dB to 55 dB in 5 dB steps
  • Maximum Continuous Input: +35 dBm
  • Amplitude Units: Log Scale Modes are dBm, dBV, dBmv, dBμV, Linear Scale Modes are nV, μV, mV, V, kV, nW, μW, mW, W, kW
• DANL
  • 10 MHz to 2.4 GHz with RBW normalized to 1 Hz, 0 dB attenuation, Preamp Off: ‑141 dBm maximum, ‑146 dBm typical
  • >2.4 GHz to 3 GHz with RBW normalized to 1 Hz, 0 dB attenuation, Preamp Off: ‑137 dBm maximum, ‑141 dBm typical
• Spurious
  • Residual Spurious: < -90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
  • Input-Related Spurious < -75 dBc (0 dB attenuation, -30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz)
• Second Harmonic Distortion (Preamp Off, 0 dB input attenuation, -30 dBm input)
  • 50 MHz: -56 dBc
  • > 50 MHz to 200 MHz: -60 dBc, typical
  • > 200 MHz to 3000 MHz: -70 dBc, typical
• VSWR: 2:1, typical
• Smart Measurements
  • Field Strength (uses antenna calibration tables to measure dBm/m² or dBmV/m)
  • Occupied Bandwidth (measures 99% to 1% power channel of a signal)
  • Channel Power (measures the total power in a specified bandwidth)
  • ACPR (adjacent channel power ratio)
  • AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only)
  • C/I (carrier-to-interference ratio)
  • Emission Mask
• Setup Parameters
  • Frequency: Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment
  • Amplitude: Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection
  • Span: Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span
  • Bandwidth: RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/RBW
  • File: Save, Recall, Delete, Directory Management
  • Save/Recall: Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event
  • Save-on-Event: Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All
  • Delete: Selected File, All Measurements, All Mode Files, All Content
  • Directory Management: Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
• Sweep Functions
  • Sweep: Single/Continuous, Sweep Mode (Fast, Performance, No FFT), Reset, Detection, Minimum Sweep Time, Trigger Type, Gated Sweep
  • Detection: Peak, RMS, Negative, Sample, Quasi-peak
  • Triggers: Free Run, External, Video, Change Position, Manual
• Trace Functions
  • Traces: Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations
  • Trace A Operations: Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)
  • Trace B Operations: A → B, B ↔ C, Max Hold, Min Hold
  • Trace C Operations: A → C, B ↔ C, Max Hold, Min Hold, A - B → C, B - A → C, Relative Reference (dB), Scale
• Marker Functions
  • Markers: Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker Table (On/Off), All Markers Off
  • Marker Types: Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker
  • Marker Auto-Position: Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level
  • Marker Table: 1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset
• Limit Line Functions
  • Limit Lines: Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit
  • Limit Line Edit: Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right
  • Limit Line Move: To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1
  • Limit Line Envelope: Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope
  • Limit Line Advanced: Type (Absolute/Relative), Mirror, Save/Recall