Used Agilent 4352B for sale by Test Equipment Connection Corp. | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Analyzers Signal Miscellaneous Signal Analyzers Keysight Technologies (Agilent HP) 4352B For Sale Agilent 4352B

Agilent 4352B

1537 Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days

Send Request
Agilent 4352B

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent 4352B

Categories: Analyzers Signal, Miscellaneous Signal Analyzers

Manufacturer: Keysight Technologies (Agilent HP)

Model: 4352B

Condition: Used

Seller: Test Equipment Connection Corp.

Keysight (formerly Agilent) 4352B VCO/PLL Signal Analyzer.The HP 4352B test system can

VCO/PLL Signal Analyzer.The HP 4352B test system can evaluate the characteristics of VCOs and PLLs that are essential to designing local oscillators used in RF wireless eommmfication equipment. This system can provide both powerful analyzing capability for design evaluation in LAB and high speed measure-merit capability for production line test with 2 operating modes, "Signal Aualyzer" and "VCO Tester" mode. The HP 43525, which con sists of the HP 4352B VCO/PLL Signal Analyzer and Hewlett-Packard low-noise signal generator controlled by the HP 4352B, covers up to 3 GHz and can measure the main VCO/PLL evaluation parstarlets, RF power, frequency, phase noise, spectrum, frequency transient, DC consumption current and FM deviation. In addition, the HP 4352B provides and controls the DC power supply, the low-noise DC control voltage source and the l kHz signal source necessary for VCO tuning characterizing, This system can make high-speed measurements thanks to the dedicated firmware and "carrier lock multi-mode PLL" technology for phase noise measurement that enables the system lock unto the carrier of the measured signal automatically.In addition, the HP 4352B has excellent phase noise performance such as -157 dBc/Hz at i MHz offset typically, so that this test system can make reliable slid repeatable phase noise measurement with up to 10 Iiilies reduction in measurement time. Actually it can measure 801 meas
Refurbished

Product specifications of Agilent 4352B (From Used-Line T&M Specifications)

  • Launch Date
  • Alternative E5052B SSA Signal Source Analyzer, 10 MHz to 7 GHz, 26.5 GHz, or 110 GHz
  • Status Discontinued by Manufacturer

The 4352S VCO/PLL signal test system is a simple configuration and multi-functional system that provides both comprehensive analyzing capabilities for designers and high test throughput for the production line. The 3 GHz standard system consists of only two instruments, the 4352B VCO/PLL signal analyzer and a signal generator controlled via GPIB. When the 43521A downconverter unit is added to the standard system, the system can achieve the same multi-function capability up to 12.6 GHz.

The system has two operating modes, “Signal Analyzer” and “VCO Tester” mode. The “Signal Analyzer” mode offers the following measurement functions.

  • RF power level versus dc control (tuning) voltage characteristic (VCO)
  • Frequency versus dc control (tuning) voltage characteristic (VCO)
  • Tuning sensitivity (VCO)
  • Phase noise
  • RF transient
  • Spectrum

In this mode, the 4352S gives you the trace curve of each parameter on the display with a single cabling hookup.

The “VCO Tester” mode offers the following parameters measurement capability.

  • RF power level
  • Frequency
  • Dc power current
  • FM deviation/Residual FM
  • Phase noise (Carrier-to-Noise ratio)

In this mode, a specified parameter is measured quickly with numeric annotation shown on the display.

These powerful measurement capabilities improve your test productivity. By saving test time, more comprehensive testing is possible and reduce instrument rack space.

The functions of the 4352B are activated by pressing either hardkeys or softkeys provided on the front panel of the instrument. The rear panel has input and output connector ports to control the analyzer from external equipment or to control external equipment from the analyzer.

4352B VCO/PLL Signal Analyzer Specifications:

  • Power supply Dc voltage level: 0 to +15.5 V (50 mA maximum)
  • Power supply Dc voltage resolution: 1 mV
  • Power supply Dc voltage accuracy: ±(0.2 % + 2 mV)
  • Power supply connector type: BNC (F)
  • 1 kHz signal source frequency: 1 kHz
  • 1 kHz signal source level: 0 to 1 Vrms (@ open load)
  • 1 kHz signal source level resolution: 1 mVrms
  • 1 kHz signal source connector type: BNC (F)
  • Receiver frequency range: 10 MHz to 3 GHz
  • Receiver input level: -10 to +20 dBm
  • Receiver connector type: N-type (F)
  • RF power input level: -10 to +20 dBm
  • RF power resolution: 0.01 dB
  • Number of measurement points per sweep (analyzer mode): 2 to 801 points
  • Cable loss compensation: The 4352B can compensate for the RF power level loss of the cable connecting the DUT output terminal and the 4352B RF IN connector when measuring RF power
  • Frequency resolution: 1 kHz
  • Offset frequency range: 100 Hz to 10 MHz
  • Spectrum span: 10 MHz (Maximum)
  • Spectrum resolution bandwidth: 1 Hz to 3 kHz (1, 3 step)
  • FM deviation measurement range: 2 kHz, 20 kHz, 200 kHz
  • FM deviation resolution: 4 digits
  • Dc power current range: 0 to 50 mA
  • 9 inch color LCD, built-in 3.5 inch flexible disk drive
  • Interfaces: 24-bit parallel digital I/O port, external input (LO IN), external trigger input, external program RUN/CONT input, external monitor output, printer (Centronics interface, HP PCL3 language), GPIB

View Similar Listings
Hide Similar Listings

Send a Request

To: Test Equipment Connection Corp.
Optional Fields
            
            
            

About Test Equipment Connection Corp.

Logo of Test Equipment Connection Corp.
Send to a Friend

Recently Viewed Products