Panasonic VP7723B

227 Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days

VP-7723B is equipped with a low distortion signal source. Low distortion audio signal source and 1ch analyzerFeaturesAudio signal oscillator5 Hz to 110 kHz, 16.2 dBm(14.0 dBV, 10 V at open end)0.000 5 % distortion(1 kHz typical value)high performance signal sourceAC MeasurementAC level measurement: The audio analyzer has a highly sensitive AC level measurement function with indication response selectable from V [rms] or V [avg]. Seven measurement ranges are provided; 0.316 mV, 3.16 mV, 31.6 mV, 316 mV, 3.16 V, 31.6 V and 100 V full range.Relative level measurement: Deviation measurement against reference level is available. It is applied to frequency characteristics and level ratio measurement.Watt indication: By setting the imaginary load resistance (RL)across the input voltage, the power value is s calculated and displayed. Power=(Measured AC level l value)2/RL [watt] ]S/N measurement(VP-7723B) : In this mode, the oscillator is turned on for a length of time(1.5 to 3 s)and the signal component(S component level)is measured. Then, the oscillator turns off and the noise component(N component level)is measured when the input of the DUT is terminated with the characteristic impedance. The S/N ratio is obtained automatically by calculating the output signal(S component level)and N component level ratio.DC Measurement0.316 to 100 V full scale
Refurbished