Used Keysight Agilent E4361A for sale by Testwall Ltd | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Power Supplies Agilent HP Power Supplies Keysight Technologies (Agilent HP) E4361A For Sale Keysight Agilent E4361A

Keysight Agilent E4361A

404 Visitors viewed Testwall Ltd ads in the last 30 Days

Send Request
Keysight Agilent E4361A

 Add to request cart
Send to a Friend
Flag of IrelandEquipment Location: Ireland      
View Description>
Hide Description

Description of Keysight Agilent E4361A

Categories: Power Supplies, Agilent HP Power Supplies

Manufacturer: Keysight Technologies (Agilent HP)

Model: E4361A

Condition: Used

Seller: Testwall Ltd

Keysight (Agilent) E4361A

Solar Array Simulator DC Module, 65V, 8.5A, 510W


Agilent / HP E4361A Solar Array Simulator DC Module (call for availability)The Agilent / HP E4361A is a 510W Solar Array Simulator DC Power Module that simulates the output characteristics of a solar array. The Agilent / HP E4361A Solar Array Simulator DC Module is primarily a cur source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of diffe solar arrays under various environmental conditions (ie., temperature, age, eclipse, spin etc.). The Agilent / HP E4361A Solar Array Simulator DC Module gives you the flexibility to operate it in two ways:

  • Input the four key operational parameters (Voc, Isc, Vmp, Imp) needed for the Solar Array Simulator to internally create an I-V curve of a solar array
  • Download a user defined table for the I-V curve of the solar array

    • Features and Specifications of the Agilent / HP E4361A Modular Solar Array Simulator DC Module include:

  • Output Ratings (Simulator and Table Modes):
      • Maximum Power:  510 W
      • Maximum Open Circuit Voltage (Voc):  65 V
      • Maximum Voltage Point (Vmp):  60 V
    • Line Voltage 200 V / 230 V / 240 V:
      • Maximum Short Circuit Cur (Isc):  8.5 A
      • Maximum Circuit Point (Imp):  8.5 A
    • Line Voltage: 100 V / 120 V:
      • Maximum Short Circuit Cur (Isc):  4.25 A
      • Maximum Circuit Point (Imp):  4.25 A
  • Output Ratings (Fixed Mode):
    • Voltage:  0 – 60 V
    • Line Voltage: 200 V / 230 V / 240 V
      • Cur:  0 – 8.5 A
    • Line Voltage:  100 V / 120 V
      • Cur:  0 – 4.25 A
  • Cur Derating Factor (from 40°C to 55°C):  0.11 A/°C
  • Output Voltage Ripple & Noise (from 20 Hz to 20 MHz with a resistive load, outputs ungrounded, or either output grounded):
      • Simulator / Table Mode:
        • 20 mVrms
        • 125 mVp-p
      • Fixed Mode (constant voltage):
        • 24 mVrms
        • 150 mVp-p
  • Programming Accuracy (@ 23°C ±5°C):
      • Fixed Mode Voltage:  0.075% + 25 mV
      • Fixed Mode Cur:  0.2% + 20 mA
  • Readback Accuracy (from front panel or over GPIB with respect to actual output @ 23 ±5°C):
      • Voltage:  0.08% + 25 mV
      • +Cur:  0.20% + 20 mA
      • -Cur:  0.35% + 48 mA
  • Load Regulation – Fixed Mode (change in output voltage or cur for any load voltage change within ratings):
      • Constant Voltage:  2 mV
      • Constant Cur:  1 mA
  • Line Regulation – Fixed Mode (change in output voltage or cur for any line voltage change within ratings):
      • Constant Voltage:  2 mV
      • Constant Cur:  1 mA
  • Output Cur Ripple & Noise (from 20 Hz to 20 MHz with a resistive load, outputs ungrounded, or either output grounded):
      • Simulator/Table Mode:
        • 4 mArms
        • 32 mAp-p
      • Fixed Mode (constant cur):
        • 2.5 mArms
        • 19 mAp-p
  • Output Programming Range (maximum programmable values):
      • Simulator/Table Mode Voltage:  0 – 65 V
      • Fixed mode Voltage:  0 – 61.5 V
    • Line Voltage:  200 V / 230 V / 240 V:
      • Cur:  0 – 8.66 A
    • Line Voltage: 100 V / 120 V:
      • Cur:  0 – 4.33 A
      • Overvoltage Protection:  0 – 74 V
      • Overcur Limit:  0 – 10.6 A
  • Programming Resolution (average values):
      • Voltage:  19 mV
      • Cur:  2.7 mA
      • Overvoltage Protection:  325 mV
      • Overcur Limit:  46 mA
  • Programming Accuracy:
      • Overvoltage Protection:  0.65 V
      • Overcur Limit:  0.5% + 215 mA
      • Cur Monitor (referenced to P common):  1.0% + 130 mA
  • Fixed Mode Analog Cur Programming:
      • Analog Programming:  1.0% + 5.5 mA
      • +Ip to -Ip Diffeial Input (0 to full scale):  0 to -4 V
      • Maximum Common Mode Voltage (referenced to +OUT): ±18 V
      • Nominal Input Impedance:  20 kO
  • Drift / Temperature Stability (change in output over 8 hours underconstant load, line, and ambient, following a 30 minute warmup):
      • Voltage:  0.04% + 1 mV
      • Cur:  0.1% + 0.85 mA
  • Temperature Coefficients (output change per °C):
      • Voltage:  0.01% + 325 µV
      • Cur:  0.025% + 215 µA
  • Output Capacitance:  < 100 nF
  • Maximum Reverse Diode Cur (with fans running):  8.5 A
  • Output Cur Settling Time (output recovery to within 1.5 A of an operating point on the I-V curve (V < 90% of VMP) after switching from a short circuit to a fixed load):  < 5 µs
  • Maximum Capacitive Load (for stable operation):
      • Simulator/Table Mode:  No Restriction
      • Fixed Mode:  2000 µF
  • Load Lead Drop with Remote Sensing:
      • Simulator/Table Mode:  Up to 2 volts + (Voc – Vmp)
      • Fixed Mode:  Up to 2 volts total
  • Cur Sinking Capability:
      • Simulator/Table Mode:  350 mA
      • Fixed Mode:  420 mA
  • Voltage Programming Rise/Fall Time (time for output to change from 90% to 10% or 10% to 90% of its total excursion):  < 8 ms
  • Voltage Programming Settling Time (time for output change to settle within 0.1% of the rating of the unit; either 60 mV or 120 mV):  25 ms typical
  • Monotonicity:  Output is monotonic over entire rated voltage, cur, temperature range
  • Auto-Parallel Configuration:  Up to 4 outputs
  • Series and Shunt Switching Frequency (switching frequency is controlling by a customer-supplied external series or shunt FET connected to the output):  50 kHz maximum
  • Output Terminal Isolation (maximum, from chassis ground):  ±240 Vdc
    • Maximum Power:  510 W
    • Maximum Open Circuit Voltage (Voc):  65 V
    • Maximum Voltage Point (Vmp):  60 V
  • Line Voltage 200 V / 230 V / 240 V:
    • Maximum Short Circuit Cur (Isc):  8.5 A
    • Maximum Circuit Point (Imp):  8.5 A
  • Line Voltage: 100 V / 120 V:
    • Maximum Short Circuit Cur (Isc):  4.25 A
    • Maximum Circuit Point (Imp):  4.25 A
  • Maximum Power:  510 W
  • Maximum Open Circuit Voltage (Voc):  65 V
  • Maximum Voltage Point (Vmp):  60 V
  • Maximum Short Circuit Cur (Isc):  8.5 A
  • Maximum Circuit Point (Imp):  8.5 A
  • Maximum Short Circuit Cur (Isc):  4.25 A
  • Maximum Circuit Point (Imp):  4.25 A
  • Voltage:  0 – 60 V
  • Line Voltage: 200 V / 230 V / 240 V
    • Cur:  0 – 8.5 A
  • Cur:  0 – 8.5 A
  • Line Voltage:  100 V / 120 V
    • Cur:  0 – 4.25 A
  • Cur:  0 – 4.25 A
    • Simulator / Table Mode:
      • 20 mVrms
      • 125 mVp-p
    • Fixed Mode (constant voltage):
      • 24 mVrms
      • 150 mVp-p
  • Simulator / Table Mode:
    • 20 mVrms
    • 125 mVp-p
  • 20 mVrms
  • 125 mVp-p
  • Fixed Mode (constant voltage):
    • 24 mVrms
    • 150 mVp-p
  • 24 mVrms
  • 150 mVp-p
    • Fixed Mode Voltage:  0.075% + 25 mV
    • Fixed Mode Cur:  0.2% + 20 mA
  • Fixed Mode Voltage:  0.075% + 25 mV
  • Fixed Mode Cur:  0.2% + 20 mA
    • Voltage:  0.08% + 25 mV
    • +Cur:  0.20% + 20 mA
    • -Cur:  0.35% + 48 mA
  • Voltage:  0.08% + 25 mV
  • +Cur:  0.20% + 20 mA
  • -Cur:  0.35% + 48 mA
    • Constant Voltage:  2 mV
    • Constant Cur:  1 mA
  • Constant Voltage:  2 mV
  • Constant Cur:  1 mA
    • Constant Voltage:  2 mV
    • Constant Cur:  1 mA
  • Constant Voltage:  2 mV
  • Constant Cur:  1 mA
    • Simulator/Table Mode:
      • 4 mArms
      • 32 mAp-p
    • Fixed Mode (constant cur):
      • 2.5 mArms
      • 19 mAp-p
  • Simulator/Table Mode:
    • 4 mArms
    • 32 mAp-p
  • Fixed Mode (constant cur):
    • 2.5 mArms
    • 19 mAp-p
  • 4 mArms
  • 32 mAp-p
  • 2.5 mArms
  • 19 mAp-p
    • Simulator/Table Mode Voltage:  0 – 65 V
    • Fixed mode Voltage:  0 – 61.5 V
  • Line Voltage:  200 V / 230 V / 240 V:
    • Cur:  0 – 8.66 A
  • Line Voltage: 100 V / 120 V:
    • Cur:  0 – 4.33 A
    • Overvoltage Protection:  0 – 74 V
    • Overcur Limit:  0 – 10.6 A
  • Simulator/Table Mode Voltage:  0 – 65 V
  • Fixed mode Voltage:  0 – 61.5 V
  • Cur:  0 – 8.66 A
  • Cur:  0 – 4.33 A
  • Overvoltage Protection:  0 – 74 V
  • Overcur Limit:  0 – 10.6 A
    • Voltage:  19 mV
    • Cur:  2.7 mA
    • Overvoltage Protection:  325 mV
    • Overcur Limit:  46 mA
  • Voltage:  19 mV
  • Cur:  2.7 mA
  • Overvoltage Protection:  325 mV
  • Overcur Limit:  46 mA
    • Overvoltage Protection:  0.65 V
    • Overcur Limit:  0.5% + 215 mA
    • Cur Monitor (referenced to P common):  1.0% + 130 mA
  • Overvoltage Protection:  0.65 V
  • Overcur Limit:  0.5% + 215 mA
  • Cur Monitor (referenced to P common):  1.0% + 130 mA
    • Analog Programming:  1.0% + 5.5 mA
    • +Ip to -Ip Diffeial Input (0 to full scale):  0 to -4 V
    • Maximum Common Mode Voltage (referenced to +OUT): ±18 V
    • Nominal Input Impedance:  20 kO
  • Analog Programming:  1.0% + 5.5 mA
  • +Ip to -Ip Diffeial Input (0 to full scale):  0 to -4 V
  • Maximum Common Mode Voltage (referenced to +OUT): ±18 V
  • Nominal Input Impedance:  20 kO
    • Voltage:  0.04% + 1 mV
    • Cur:  0.1% + 0.85 mA
  • Voltage:  0.04% + 1 mV
  • Cur:  0.1% + 0.85 mA
    • Voltage:  0.01% + 325 µV
    • Cur:  0.025% + 215 µA
  • Voltage:  0.01% + 325 µV
  • Cur:  0.025% + 215 µA
    • Simulator/Table Mode:  No Restriction
    • Fixed Mode:  2000 µF
  • Simulator/Table Mode:  No Restriction
  • Fixed Mode:  2000 µF
    • Simulator/Table Mode:  Up to 2 volts + (Voc – Vmp)
    • Fixed Mode:  Up to 2 volts total
  • Simulator/Table Mode:  Up to 2 volts + (Voc – Vmp)
  • Fixed Mode:  Up to 2 volts total
    • Simulator/Table Mode:  350 mA
    • Fixed Mode:  420 mA
  • Simulator/Table Mode:  350 mA
  • Fixed Mode:  420 mA

    •     

    View Similar Listings
    Hide Similar Listings

    Send a Request

    To: Testwall Ltd
    Optional Fields
                
                
                

    About Testwall Ltd

    Send to a Friend

    Recently Viewed Products