Digital Phosphor Oscilloscope 500MHz 5GS/s, 4 Channel,
USB Interface.
The Tektronix TDS3054C is a Digital Phosphor Oscilloscope of the TDS3000C series with a bandwidth of 500 MHz and 4 channels designed for precise signal representation, quickly tests and characterizing.
Bandwidth: 500 MHz
Number of input channels: 4
External trigger input
Sample rate/ch: 5 GSa/s
Continuous capture rate: 3,600 Wfms/s
Record length: 10,000 points
Vertical resolution: 9 bit
Vertical sensitivity:
1 Mohms: 1 mV/scale part up to 10 V/scale part
50 ohms: 1mV/scale part up to 1 V/ scale part
Input coupling: AC, DC, GND
Input impedance: 1 Mohms parallel to 13 pF or 50 ohms
Accuracy DC V Gain:+/- 2 %
Max. input voltage:
1 Mohms: 150 V eff max. <= 400="">
50 ohms: 5 Veff max. <= 30="">
Position range: +/- 5 div
Bandwidth Limiting: 20 MHz, 150 MHz
Time base range: 2 ns to 10 s
Accuracy time base: +/- 20 ppm time about any time interval from 1 ms
25 measurements
USB Host connector on front panel
FFT standard
Multilanguage user interface
Versatile comfort trigger
WaveAlert, automatic detection of signal deviation
TekProbe interface supports active, differential and current probes with automatic scaling
Optional available:
Built-in ethernet port
GPIB, RS232, VGA
TDSPCS1 OpenChoice software
WaveStar software
Integration with third-party software
Advanced analysis module
Limit testing module
Telecommunications Mask Testing module (TMT)
Extended video module
Serial digital video module (Option 601)
Internal battery operation up to 3 hours without line power
€ 13,500 (net) $16,200 (US)