Teladyne LeCroy HDO4032

90 Visitors viewed Testwall Ltd ads in the last 30 Days

HDO4000 oscilloscopes combine Teledyne LeCroy's HD4096 high definition technology with long memory and powerful debug tools in a compact form factor with a 12.1" multi-touch display. HD4096 high definition technology enables oscilloscopes to capture and display signals of up to 1 GHz with high sample rate and 16 times more resolution than other oscilloscopes.

• 12-bit ADC resolution, up to 15 bit with enhanced resolution
• 200 MHz, 350 MHz, 500 MHz, 1 GHz bandwidths
• Long Memory - up to 25 Mpts/Ch (50 Mpts interleaved)
• 12.1" Multi-touch screen display
• WaveScan - Advanced Search and Find
• LabNotebook Documentation and Report Generation
• History Mode - Waveform Playback
• Power Analysis Software
• Serial Data Trigger and Decode

HDO4032 specifications: 350 MHz, 2.5 GS/s, 2 Ch, 12.5 Mpts/Ch, 12-bit HD Oscilloscope with 12.1" WXGA Touch Display.

• Vertical system
  • Bandwidth: 350 MHz
  • Rise time: 1 ns typical
  • Input Channels: 2
  • Bandwidth Limits: 20 MHz, 200 MHz
  • Input Impedance: 1 MΩ ±2.0% || 15 pF, 50 Ω ±2.0%
  • Input Coupling: 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
  • Maximum Input Voltage: 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz), 50 Ω: 5 VRMS
  • Channel-Channel Isolation: ≥ 30 dB
  • Vertical Resolution: 12 bits; Up to 15 bits with ERES (enhanced resolution)
• Acquisition system
  • Single-Shot Sample Rate/Ch: 2.5 GS/s
  • Memory: 25 Mpts/Ch interleaved, 12.5 Mpts/Ch on 2 Ch; Optional memory: 50 Mpts/Ch interleaved, 25 Mpts/Ch on 2 Ch
• Triggering system
  • Modes:  Normal, Auto, Single, Stop
  • Sources: Ch 1 - Ch 4, EXT, EXT/10, AC Line
  • Coupling mode: AC, DC, LF Rej, HF Rej
  • Hold-off by Time or Events: 2ns up to 20s or 1 to 1,000,000,000 events
  • Trigger types: Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV-720p, 1080i, 1080pi), Runt, Slew Rate, Interval (signal or pattern), Dropout, Qualified (State or Edge)
  • Optional serial data triggers: I²C, SPI, UART/RS-232, CAN, LIN, FlexRay, SENT, MIL-STD-1553, ARINC 429, Audio (I²S, LJ, RJ, TDM), USB, USB-HSIC, MIPI D-PHY, DigRF3G
• Display: Color Touch Screen, 12.1 inch TFT LCD, 1280 x 800 resolution, YT and XY grid styles
• Internal Storage
  • Waveform Storage: 4 memory waveforms plus internal HDD
  • Setup Storage: 6 setups
• Math (2 Math traces): Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root, Trend, Zoom
• Measurements (8 displayed): Amplitude, Area, Base, Delay, Delta Period @ Level, Delta Time @ Level, Duty Cycle, Duty @ Level, Edge @ Level, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Frequency @ Level, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Period @ Level, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Time @ Level, Top, Width+, Width-
• Interfaces: GPIB port (optional), USB (device), Ethernet port, USB (host), External monitor port, remote control via Windows automation or Teledyne LeCroy Remote Command Set