Vector Network Analyzer 300kHz - 8GHz, 4 Port, N, R&S ID: 1145.1110K10.
Options:
B14 = Universal Interface;
B16= Direct Generator/Receiver Access for 4-port;
B21 = Generator Step Attenuator Port 1: 70dB 10dB steps;
B22 = Generator Step Attenuator Port 2: 70dB 10dB steps;
B23 = Generator Step Attenuator Port 3: 70dB 10dB steps;
B24 = Generator Step Attenuator Port 4: 70dB 10dB steps;
B31 = Receiver Step Attenuator, Port 1: 75dB in 5dB steps;
B32 = Receiver Step Attenuator, Port 2: 75dB in 5dB steps;
B33 = Receiver Step Attenuator, Port 3: 75dB in 5dB steps;
B34 = Receiver Step Attenuator, Port 4: 75dB in 5dB steps.
Unit sold with a valid calibration certifcate and with 12 months warranty.
The R&S ZVA series are high-end Vector Network Analyzers with up to four sources for sophisticated measurements up to 110 GHz.
They are an ideal choice for demanding measurements on active and passive components and modules, which require high performance and wide versatility.
The frequency range of the high-frequency models can be extended up to 500 GHz.
Frequency range:
300 kHz to 8 GHz (R&S ZVA8)
10 MHz to 24/40/50/67/110 GHz (R&S ZVA24/40/50/67/110)
Four internal sources up to 67 GHz for fast two-tone measurements on amplifiers and mixers
Generation of four phase-coherent signals up to 67 GHz
IF bandwidths up to 30 MHz for pulsed measurements on amplifiers and mixers up to 110 GHz
Linear and nonlinear amplifier and mixer measurements
Noise figure measurements
Pulse profile measurements with 12.5 ns resolution
True differential measurements for reliable characterization of active devices with balanced ports
High output power typ. > 15 dBm
Wide dynamic range typ. > 140 dB
High measurement speed < 3.5 μs per test point
Wide IF bandwidth: 1/5/30 MHz
Versatile calibration techniques: TOSM, TRL/LRL, TOM, TRM, TNA, UOSM
Automatic calibration units
Phase and group delay measurements on mixers with and without LO access
€ 34,900 (net) $41,880 (US)