Anritsu MS2026C

1537 Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days

The Anritsu VNA Master MS2026C is the highest performance, handheld solution for 2-port, 2-path measurements, anytime, anywhere. It specifically addresses complex cable and antenna measurement needs in the field with accurate, vector corrected 2-port magnitude, phase, and Distance Domain measurements. MS2026C covers a frequency band from 5 kHz to 6 GHz, which contains a wide variety of radio frequency communications systems, and also many radars and microwave communications systems, both coax and waveguide.

Equally impressive, this measurement tool offers the first 12-term error correction algorithm in the industry in a handheld VNA. With a typical measurement speed of 350 µsec per point, it is ideally suited for tuning filters in the field, where multiple S-parameters often interact during tuning. Using a 3-receiver architecture, the MS2026C can measure and display all 4 S-parameters at once with a single connection to the DUT.

• Two-active-port, fully-reversing VNA
• Frequency Range: 5 kHz to 6 GHz
• Frequency Accuracy: 1.5 ppm
• Frequency Resolution: 1 Hz to 375 MHz, 10 Hz to 6 GHz
• Transmission Dynamic Range: 2 MHz to 3 GHz, 100 dB, 3 to 6 GHz, 90 dB
• 350 µsec per data point sweep speed, ideal for fast filter tuning
• USB/Ethernet for data transfer
• Measures all four S-parameters with a single connection
• 3-receiver architecture for higher measuring speed
• 12-term error correction algorithm
• User-configured 4-quadrant simultaneous display for up to four S-parameters
• Store more than 13,000 traces and setups in memory
• External memory limited only by size of USB flash driver or PC hard disk
• High resolution daylight viewable TFT color display
• Built-in editable Cable and Signal Standard List
• Supports waveguide measurements, and SOLT, SSLT and SST calibrations
• Vector Voltmeter option, ideal for cable phase matching
• Time Domain option for precise Time or Distance Domain diagnostics, includes Gated Time Domain, LP Processing, and Phasor Impulse mode
• Distance Domain option
• Secure Data Operation option for classified data
• New Polar Impedance display
• Compatibility approved for radome/dielectric materials measurement with available test fixtures
• Balanced/Differential option for S-Parameters on high-data-rate cables, 1-port
• High Accuracy Power Meter option