Used Tektronix TLA714 for sale by Liberty Test Equipment, Inc. | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Analyzers Logic Logic Analyzer Mainframes Tektronix TLA714 For Sale Tektronix TLA714

Tektronix TLA714

743 Visitors viewed Liberty Test Equipment, Inc. ads in the last 30 Days

Send Request
Tektronix TLA714

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Tektronix TLA714

Categories: Analyzers Logic, Logic Analyzer Mainframes

Manufacturer: Tektronix

Model: TLA714

Condition: Used

Seller: Liberty Test Equipment, Inc.

Tektronix TLA714 Logic Analyzer Mainframe-Portable

Product specifications of Tektronix TLA714 (From Used-Line T&M Specifications)

  • Launch Date
  • Status Discontinued by Manufacturer

The TLA714 is a color portable mainframe. The portable mainframe is the base component of a customer-configurable portable instrument. It can function as a logic analyzer, a digital storage oscilloscope, or both, depending on the module cards installed in its slots.

  • Standard PC I/O ports, two PCMCIA PC card slots, two USB ports, and a PC-based 266 MHz Intel Pentium with MMX processor architecture that provides automatic connectivity to numerous off-the-shelf I/O devices (Ethernet, modem, printers, etc.)
  • Display system provides internal color flat-panel LCD display and an external SVGA port capable of driving large, high-resolution external monitors
  • Four backplane slots (C-size) provide compatibility with TLA 700 Series instrument modules
  • Precision clock, bus trigger line, and event signaling between the mainframe and instrument modules supports real-time triggering, sequencing, and time correlation of events
  • Mainframe compatible with international power standards, certified to international safety and EMC requirements, and tested to rugged environmental standards
  • CLK10 Frequency: 10 MHz ±100 PPM
  • System Trigger: Input TTL-compatible inputs via rear-panel BNC connectors
    • Input Destination System trigger (TTLTRG7)
    • Input Levels VIH ≥2.0V; VIL ≤ 0.8V (TTL-compatible input)
    • Input Mode Falling edge sensitive, latched (active low)
    • Minimum Pulse Width:12 ns
    • Maximum Input Voltage: 0 to +5V peak
  • External Signal Input: TTL-compatible inputs via rear-panel BNC connectors
    • Input Destinations: Signal 1, 2 (ECLTRG0, 1), Signal 3, 4 (TTLTRG0, 1)
    • Input Levels VIH ≥2.0V; VIL ≤ 0.8V (TTL-compatible input)
    • Maximum Input Voltage: 0 to +5V peak
  • System Trigger Output: TTL-compatible outputs via rear-panel BNC connectors
    • Source Selection: System trigger (TTLTRG7)
    • Output Levels (50 Ω back-terminated TTL output): VOH ≥ 4 V into open circuit; VOH ≥ 2 V into 50 Ω to ground; VOL ≤ 0.7 V sinking 10 mA
    • Source Mode: Falling edge sensitive
    • Output Protection: Short-circuit protected (to ground)
  • External Signal Output: TTL-compatible outputs via rear-panel BNC connectors
    • Source Selection: Signal 1, 2 (ECLTRG0, 1), Signal 3, 4 (TTLTRG0, 1), 10 MHz clock (CLK10)
    • Output Levels (50 Ω back-terminated TTL output): VOH ≥ 4 V into open circuit; VOH ≥ 2 V into 50 Ω to ground; VOL ≤ 0.7 V sinking 10 mA
    • Output Modes: User-definable: active (true) low or active (true) high
    • Output Protection: Short-circuit protected (to ground)

View Similar Listings
Hide Similar Listings

Listings similiar to Tektronix TLA714

Send a Request

To: Liberty Test Equipment, Inc.
Optional Fields
            
            
            

About Liberty Test Equipment, Inc.

Send to a Friend

Recently Viewed Listing Pages

Recently Viewed Products