247 Visitors viewed Valuetronics International Inc ads in the last 30 Days
Categories: Analyzers Logic, Logic Analyzer Mainframes
Manufacturer: Keysight Technologies (Agilent HP)
Model: 16501A
Condition: Used
Seller: Valuetronics International Inc
Agilent Keysight HP 16501A The 16501A is a 4 Channel logic analyzer System Expansion
The 16501A is a 4 Channel logic analyzer System Expansion Frame from Agilent Keysight HP.
The HP 16501A expansion frame has been developed to extend the HP 16500C logic analysis systems beyond its five-card limit, and meet the anticipated need for systems requiring more than five slots.
Note: The 16501A expansion frame also works with other 16500 mainframes.
Adding the 16501A to the 16500C creates a tightly-coupled, two-frame, ten-card system, fully controlled by the 16500C. A single power switch (located on the 16500C front panel) turns on both frames. The HP 16501A offers inter-frame module arming/triggering capabilities with a 2-nanosecond time correlation between modules.
The 16501A expansion frame is very similar to the mainframe. It consists of a card cage, rear panel, power supply, and fans. The interface is a buffering scheme to pass signals between the mainframe and the 16501A backplane. It contains circuitry that controls external arming selection and enables an HP 16501A card to drive an output dedicated to triggering other instruments.
The expansion frame interface board is connected to the mainframe interface board through a 68-pin flat cable. In addition to the HP 16500C rear panel signals, the cable incorporates control signals, which allow the CPU to communicate with and control the expansion frame interface board. Ground lines separate signal lines within the cable to prevent cross-coupling or soft failures. The cable is externally shielded to reduce RFI emissions.
The power supply of the 16501 expansion frame is controlled by the 16500 mainframe. Because the power is controlled from another instrument, the power switch of the 16501 must be on before the 16500 is turned on or the expansion frame will not be recognized by the logic analysis system software.
Module-to-module arming within the 16501A follows the arming specifications for the 16500C in that any module may arm any other module. The maximum intermodule arming level is five. When the 16501A is attached to the 16500C, the resulting 16500C/16501A system operates as a single frame. The 16500C and 16501A may receive only one external arming signal from the other frame.
The 16500C mainframe may use only two external arming signals — any module in the 16501A expansion mainframe or the rear-panel BNC. The arming signal can come from three sources: Any module in the 16500C mainframe, any module in the 16501A expansion mainframe, or from the rear-panel PORT IN BNC.
Seller Test Equipment Experts
Seller NSCA Technologies LLC
Used-Line Dealer since : 1999
Company info
ValueTronics was founded in 1992 as a buyer and seller of used and refurbished test equipment. We now have customers and contacts worldwide and are a supplier to major electronic test equipment users around the world as well as the smaller end users who want to buy, sell, and trade electronic test equipment. Our application engineering and management staff has many years of experience in the sales of new and refurbished electronic test equipment. We can save you time and money with your electronic test equipment acquisition. We have huge inventory of new and used equipment, trained staff, a great customer service reputation and no voice mail or telephone menu system.
We are specialized in
Accessories, Audio/Video, Calibration, Data Acquisition, Generators, Metrology, Optics / FiberOptics, Oscilloscopes & Logic Analyzers, Power Products & Compliance Equipment, RF & Microwave, Telecom, Timers & Counters
Our Services
Rentals, Calibration, Repair, Market place
Our Sales Policy
Most items have a 6 month parts and labor warranty.
Net-30 Terms available, upon credit approval, Wire Transfer, Visa, MC, and AmEx also accepted.
Items are shipped with standard accessories and operating manual. Equipment is tested in our NIST Traceable laboratory.
Delivery is often “Ship Today” with some items taking 5 – 10 business days ARO.
Some other services we offer: Rentals, equipment repair, calibration, consignment, purchase of your equipment, educational programs and trade-in.
Disributor of
BK Precision, Fluke, Keithley, Keysight Technologies (Agilent HP), Tektronix
Use this form to contact a dealer from the Dealer Directory. You may contact up to 10 Dealers per day. Please note: Contact forms are monitored for spam. Users who send spam will be blocked from Used-Line.
To:
Remember me
*Contact name, email and message are required.
Product Specs
(From Used-Line T&M Specifications)
Agilent 16501A
Description: