Used Agilent 16500B for sale by Rosenkranz Elektronik | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Analyzers Logic Logic Analyzer Mainframes Keysight Technologies (Agilent HP) 16500B For Sale Agilent 16500B

Agilent 16500B

223 Visitors viewed Rosenkranz Elektronik ads in the last 30 Days

Send Request
Agilent 16500B
  • €399

 Add to request cart
Send to a Friend
Flag of GermanyEquipment Location: Germany      
View Description>
Hide Description

Description of Agilent 16500B

Categories: Analyzers Logic, Logic Analyzer Mainframes

Manufacturer: Keysight Technologies (Agilent HP)

Model: 16500B

Condition: Used

Seller: Rosenkranz Elektronik

Keysight (Agilent/HP) 16500B Opts: no option

The 16500B Logic Analysis System can be configured for a wide range of measurement tasks, including microprocessor debug, hardware design verification and debug. The unit accepts up to five different measurement modules (not included). Capture data from multiprocessor systems using up to 1,000 channels of 100MHz state analysis or up to 640 channels of 100MHz state analysis with 1 Mb/channel memory depth. All data is time-correlated. Track down signal integrity problems with HP#039;s built-in 2 GSa/s digitizing oscilloscope.
Option: no option

Product specifications of Agilent 16500B (From Used-Line T&M Specifications)

  • Launch Date
  • Alternative 16900 Series Modular Logic Analysis System
  • Status Discontinued by Manufacturer

The HP 16500B is a mainframe of the Hewlett-Packard Logic Analysis System . It offers a modular structure for plug-in cards with a wide range of state, timing, oscilloscope, and pattern generator capabilities. This allows you to configure the HP 16500B using only the modules you need in order to perform a desired measurement or set of measurements, while giving you the flexibility to change or update them later.

The Logic Analysis System provides both experienced and first-time users with powerful measurement capabilities. The pop-up menus and color graphics lead you through setups and measurements quickly and easily, without the need to memorize a lot of steps. By touching the appropriate fields or using the cursor of either the optional mouse or keyboard, you can perform functions, configure menus, and move from one menu to another.

When the instrument is powered up, predetermined values are automatically assigned to the different fields of the menus to configure the instrument for basic measurements. This allows you to make a basic measurement by turning on the instrument, connecting the probes, and touching the Run field. Often, only minor changes are needed for more complex measurements.

With the intermodule capabilities of the Logic Analysis System, you can make interactive measurements between modules. This allows you to configure modules to interact with each other, using the triggering capabilities of one module and the acquisition capabilities of another.

  • Modular mainframe with five card slots
  • 9-inch color monitor
  • Touchscreen with on/off control
  • Battery backed Realtime clock
  • Programmable PORT IN voltage level and edge selection
  • 3.5-inch flexible disk drive with DOS and LIF form at support
  • 170 Mbyte hard disk drive with DOS form at support
  • Intermodule triggering and 2 ns time correlation of acquired data
  • Input/Output Rear Panel BNCs
    • Port-in User selectable: TTL, ECL or user defined; Zin = 4 kOhms; Vin = -4.0 V at 1.5 mA to +5 V at 1.6 mA
    • Port-out Output signal is active high, TTL output level, high > 2 V into 50 Ohms, low < 0.4 V into 50 Ohms
  • Intermodule Bus (IMB) Characteristics
    • Run Control: Oscilloscope, timing, state, and pattern generation can be armed by Group Run. Modules can run concurrently or be armed in series. Each module can arm one or more modules
    • Mixed Display Mode: Any timing or oscilloscope waveform displays can be mixed. State listings can be included with waveforms in the State/Timing Mixed Mode display
    • Acquiring Data for Mixed Displays: To obtain a mixed display, multiple modules must be armed through the IMB. To include state listings in mixed mode displays, state time tagging must be on
    • Time Interval Accuracy Between Modules: Equals the sum of the channel-to-channel time interval accuracies of each module used in the measurement, for a de-skewed measurement
    • Time Correlation Resolution: 2 ns (500 MHz)
  • HP-IB and RS-232C interfaces for
    • Hardcopy output to a printer
    • Controller interface
  • Options
    • HP 16501A Expansion Frame - Increase available card slots to ten when you connect the expansion frame to an HP 16500B
    • Mouse
    • Keyboard
    • Ethernet LAN interface
    • Expandable system memory up to 64 Mbytes

View Similar Listings
Hide Similar Listings

Listings similiar to Agilent 16500B

Send a Request

To: Rosenkranz Elektronik
Optional Fields
            
            
            

About Rosenkranz Elektronik

Logo of Rosenkranz Elektronik
Send to a Friend

Recently Viewed Listing Pages

Recently Viewed Products