58 Visitors viewed Amabile Electronic Test LLC ads in the last 30 Days
Categories: T&M, Miscellaneous Test Equipment
Manufacturer: Krohn-Hite Corp.
Model: 6600
Condition: Used
Seller: Amabile Electronic Test LLC
Krohn-Hite The Model 6600 provides precision phase measurements with a typical
Krohn-Hite The Model 6600 provides precision phase measurements with a typical accuracy of 0.1° and 0.1° resolution over most of the frequency range. It will accept a wide range of input signal levels from 10mV rms to 320V rms and input waveforms including sine, triangle, square and pulses. A 4 digit, LED display provides continuous direct readout of phase angles between 0.0° and 360.0°. Two common factors will affect the accuracy of a phasemeter are distortion and/or broadband noise present on either or both of the input signals. A unique circuit design used in the 6600 significantly reduces any effects that may be caused by these two factors. Another problem found in most phasemeters is the inability to respond to very small phase angles, resulting in fluctuations or inconsistencies in the meter reading (sometimes referred to as ambiguity). To overcome this problem, the 6600 uses a design that eliminates any ambiguities that may occur at readings near 0°, 180° and 360°. Provided are an automatic selection of the input voltage range, front panel indicators to indicate a too low/high input voltage range, and an analog output for use with an external meter or strip chart recorder. Part no. RK-316 permits the installation of the Model 6600 into a standard 19" rack spacing. reconditioned
The Model 6600 provides precision phase measurements with a typical accuracy of 0.1° and 0.1° resolution over most of the frequency range. It will accept a wide range of input signal levels from 10mV rms to 320V rms and input waveforms including sine, triangle, square and pulses. A 4 digit, LED display provides continuous direct readout of phase angles between 0.0° and 360.0°. Two common factors will affect the accuracy of a phasemeter are distortion and/or broadband noise present on either or both of the input signals. A unique circuit design used in the 6600 significantly reduces any effects that may be caused by these two factors. Another problem found in most phasemeters is the inability to respond to very small phase angles, resulting in fluctuations or inconsistencies in the meter reading (sometimes referred to as ambiguity). To overcome this problem, the 6600 uses a design that eliminates any ambiguities that may occur at readings near 0°, 180° and 360°. Provided are an automatic selection of the input voltage range, front panel indicators to indicate a too low/high input voltage range, and an analog output for use with an external meter or strip chart recorder. Part no. RK-316 permits the installation of the Model 6600 into a standard 19" rack spacing.
Seller Valuetronics International Inc
Seller BRL Test, Inc.
Used-Line Dealer since : 2010
Company info
Amabile Electronic Test LLC (AET) provides a wide variety of pre-owned bench top, portable and rack mountable electronic test and measurement equipment. Our services include sales, rentals, leases, calibration and repair. AET will even buy your underutilized and surplus equipment for cash or trade in toward new equipment. AET carries and supports all leading manufacturers specializing in HP, Agilent, Tektronix, Rohde & Schwarz, Fluke and Anritsu. Our equipment has been calibrated in laboratories accredited by the American Association for Laboratory Accreditation (A2LA) in accordance with the recognized international standards ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994 and requirements of ISO9001-2008 for calibration of measuring and test equipment.
We are specialized in
Accessories, Calibration, Data Acquisition, Generators, Metrology, Optics / FiberOptics, Oscilloscopes & Logic Analyzers, Power Products & Compliance Equipment, RF & Microwave, Telecom, Timers & Counters
Our Services
Rentals, Calibration, Repair
Our Sales Policy
All equipment is offered with a parts and labor warranty and right of refusal period to give you the added assurance you are receiving quality equipment ready to work upon a timely delivery.
Disributor of
Use this form to contact a dealer from the Dealer Directory. You may contact up to 10 Dealers per day. Please note: Contact forms are monitored for spam. Users who send spam will be blocked from Used-Line.
To:
Remember me
*Contact name, email and message are required.
Product Specs
(From Used-Line T&M Specifications)
Krohn-Hite 6600
Description: