Compliance West HT-3500S-RF

128 Visitors viewed Avalon Test Equipment ads in the last 30 Days

Adjustable Ground Continuity, Portable and Rugged. 0-2500Vac @ 20mA, 0-3500Vdc @ 5mA

Key Features and Functions

Compliance West introduces their Rugged Hipot Tester, the HT-3500S-RF.  It is encased in a shipping enclosure roomy enough for cables or a DVM, with all controls accessible without removing it from the enclosure.

• High precision leakage current, duration and ground continuity settings.
• Allows no load setup of leakage current and test dwell times.
• Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
• Leakage currents can be set from 1-20 mA AC or 1-5 mA DC in 0.1mA increments.
• Dwell times can be set from 1-60 seconds in 1 second increments.
• Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
• Small and light. 9.25" wide x 4.75" high x 10" deep. 14 lbs. But rugged enough to test manufactured housing.
• Ground continuity check is defeatable for testing two-wire products.
• Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
• J2 and J3 cords allow connection of pigtail power leads.
• Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well.
• Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
• Operation Instructions are printed on the rear panel for easy reference.
• In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
• RED lights and a buzzer leave no question if a failure has occurred.
• Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
• Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).