Used Agilent 8160A for sale by Alltest | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Generators Pulse Generators Keysight Technologies (Agilent HP) 8160A For Sale Agilent 8160A

Agilent 8160A

241 Visitors viewed Alltest ads in the last 30 Days

Send Request
Agilent 8160A
  • $8,497

    IN STOCK
 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent 8160A

Categories: Generators, Pulse Generators

Manufacturer: Keysight Technologies (Agilent HP)

Model: 8160A

Condition: Used

Seller: Alltest

Agilent Keysight 8160A 50MHz PULSE GENERATOR

In stock
Quantity: 9

Product specifications of Agilent 8160A (From Used-Line T&M Specifications)

  • Launch Date
  • Alternative 8110A Pulse Pattern Generator, 150 MHz
  • Status Discontinued by Manufacturer

The 8160A is a programmable pulse generator with applications as a bench instrument or part of an automatic test system. It is available with one (standard) or two (option 020) independent channels and can be rack-mounted with input/output connectors on the rear panel if required.

All parameters are indicated by an alphanumeric display above the keyboard. This eliminates both the need for an oscilloscope to monitor the output and the associated problem of misreading a parameter. All front panel controls are pushbuttons, thus outputs can be very easily and quickly set up.

All operations with the 8160A are microprocessor-controlled. This further simplifies operation whether performed from the front panel controls or programmed over the HP-IB. The microprocessor also enables sophisticated error detection routines to detect and display any incompatible pulse settings.

  • Period: 20.0 ns to 999 ms
  • Width: 10.0 ns to 999 ms
  • Delay: 0.00 ns to 999 ms
  • Double pulse: 20 ns to 999 ms
  • Output frequency (with output amplifier in use): 1 Hz to 50 MHz
  • Output high level range: -9.89 V to 9.99 V
  • Output low level range: -9.99 V to 9.89 V
  • Amplitude: 0.10 V minimum, 9.99 V maximum
  • Accuracy: 1% of programmed value ±50 mV ±1% of amplitude
  • Settling time: 40 ns to specified accuracy
  • Transition times: 06.0 ns to 9.99 ms
  • Operating modes:
    • NORM: Continuous pulse stream
    • GATE: External signal enables rate generator. First output pulse sync with leading edge. Last pulse always complete
    • TRIG: Each input cycle generates a single output pulse
    • BURST: Each input cycle generates a programmable number (0 to 9999) of pulses - Minimum time between burst is one period
    • MAN: Simulates external signal with EXT INPUT switched OFF
    • SINGLE PULSE: Provides a single pulse independent of input and period settings
  • External input:
    • Trigger level: +10 to -10 V
    • Maximum input: ±12 V in 50 Ω, ±20 V in 10 kΩ
    • Minimum amplitude: 500 mVpp
    • Slope: positive or negative
    • Minimum pulse width: 3 ns
    • Typical input resisitance: 50 Ω or (also in OFF) 10 kΩ
    • Delay from trigger input to trigger output: 90 ns ±10 ns
  • Trigger output
    • Output amplitude: ≥2.5 V into 50 Ω,  ≥5 V into open circuit
    • Typical source resistance: 50 Ω
    • Typical pulse width: 8 ns (PER < 100 ns), 40 ns (100 ns < PER < 1 µs), 400 ns (PER ≥ 1 µs) 
  • HP-IB interface

View Similar Listings
Hide Similar Listings

Send a Request

To: Alltest
Optional Fields
            
            
            

About Alltest

Logo of Alltest
Send to a Friend

Recently Viewed Products