Programmable Arbitrary/Function Generator 1µHz - 25MHz, 1 Channel,
w/ USB, GPIB and LAN Interfaces
The Tektronix AFG3021B is a 1-Channel Arbitrary/Function Generator with a bandwidth of 1 µHz to 25 MHz.
Features & Benefits:
25 MHz sine waveforms
14 bits, 250 MS/s arbitrary waveforms
5.6 in. display for full confidence in settings and waveform shape
Large color display for viewing settings at a glance (mono display on AFG3021B)
Multilanguage and intuitive operation
Pulse waveform with variable edge times
AM, FM, PM, FSK, PWM modulation modes
Linear and logarithmic sweep and burst
Floating outputs (isolated from ground)
Master/slave operation
USB connector on front panel for Waveform storage on memory device
USB, GPIB, and LAN interfaces
LabVIEW and LabWindows/IVI-C drivers
Waveforms:
Sine, square, pulse, ramp, triangle, sin(x)/x, exponential rise and decay, gaussian, lorentz, haversine, DC, noise
Sine wave: 1 µHz to 25 MHz
Sine wave in burst mode: 1 µHz to 12.5 MHz
Effective max. frequency out: 25 MHz
Square wave: 1 µHz to 12.5 MHz
Rise/fall time: <= 18="">
Jitter (RMS) typ.: 500 ps
Ramp wave: 1 µHz to 250 kHz
Pulse wave: 1 µHz to 12.5 MHz
Pulse width: 30 ns to 999.99 s
Other waveforms: 1 µHz to 250 kHz
Noise bandwidth (-3 dB): 25 MHz
Arbitray waveforms: 1 mHz to 12.5 MHz
Arbitray waveforms in burst mdoe: 1 mHz to 6.25 MHz
Effective analog bandwidth (-3 db): 34 MHz
Non-volatile memory: 4 waveforms
Memory sample rate 2 to 128 k: 250 MS/s
Vertical resolution: 14 bits
Rise/Fall time: <= 20="">
Jitter (RMS) 4 ns
Amplitude into 50 ohms loads: 10 mVpp to 10 Vpp
Amplitude, open circuit: 20 mVpp to 20 Vpp
Output impedance: 50 ohms
Applications:
Electronic test and design
Sensor simulation
Functional test
Education and training
€ 934 (net) $1,121 (US)