Keysight Technologies (Agilent HP) 5356A

743 Visitors viewed Liberty Test Equipment, Inc. ads in the last 30 Days

With the standalone HP 5345A/5355A mainframe, you can make pulse-frequency measurements from 400 MHz to 1.5 GHz at the push of a button. The HP 5355A automatic frequency converter, together with the 5356A/B/C/D frequency converter heads, increase the pulse and CW frequency measurement capabilities of the 5345A universal systems counter to 18, 26.5, 40, and 110 GHz, respectively.

• Frequency range: 1.5 to 18 GHz
• Maximum input: +5 dBm
• Single shot time interval: 2 ns
• Sensitivity: -25 dBm
• Dynamic range: 25 dB at 1.5 to 12.4 GHz
• Damage level: +25 dBm peak
• SWR (typical): 1.5 to 10 GHz: <2:1, 10 to 18 GHz: <3.1
• Input connector: N male
• FM tolerance (CW mode): Auto mode - 15 MHz p-p (60 MHz in special FM mode); Manual mode - 80 MHz p-p, Rate dc - 10 MHz
• FM tolerance (Pulse mode), typical: Auto mode - 50 MHz p-p chirp, Manual mode - 80 MHz p-p chirp 
• AM tolerance (CW mode): Any modulation index as long as the minimum signal level is greater than the counter sensitivity
• LSD displayed (CW and Pulse mode): 1 Hz/5345A Gate Time
• Resolution (CW mode):
  ±2 x LSD ±1 x 10^-10 rms x Freq
• Resolution (Pulse mode): ±2 x LSD ± rms jitter
• Minimum pulse width: 100 ns in Auto mode, 60 ns in Manual mode
• Maximum pulse width: 20 ms
• Minimum pulse repetition frequency: 50 Hz
• Maximum pulse repetition frequency: 2 MHz
• Minimum on/off ratio (typical): 25 dB
• Maximum video feedthrough (typical): 15 mVp-p for rf burst rise and fall times ≥10 ns
• High pass filter option
  • Insertion loss at 1.5 to 18 GHz: <1 dB
  • Insertion loss below 100 MHz: >35 dB
• HP-IB readings/second: to 9000